One way to reduce the amount of harmful emissions from diesel fuel could be the replacement of part of the fuel with biofuel. Research is related to the production of biodiesel fuel in three ways: transesterification of vegetable oils; esterification of fat acids extracted from vegetable oil; and hydroprocessing of vegetable oils using catalysts in the diesel hydrotreatment process. Food and non-food oils, monatomic and diatomic alcohols were used to produce biodiesel fuel. Optimal parameters of vegetable oil transesterification have been determined: temperature; raw material ratio (oil/alcohol); mixing speed; time; type of process catalyst. The characteristics of the obtained biodiesel fuel samples were studied and compared with each other as well as with the requirements of EN 14214 “Automotive fuels. Fat acid methyl ethers for diesel engines. General technical requirements” and EN 590:2009 “EURO diesel fuel. Technical specifications”. With regard to the physical and chemical characteristics of biodiesel fuel, the best way to produce it is by transesterification of vegetable oils. However, all fuels can be used as components of a blended environmentally friendly diesel fuel.
Process of grain drying is discussed by the authors, which is considered one of the preliminary stages in the technology of biodiesel production. The drying process has a number of disadvantages that affect the quality and cost of biodiesel fuel. The impossibility of uniform heating and maintaining the required temperature with minimal energy costs is considered one of the most important defects that deserve scientific research. The authors propose a method for changing the heating system and preheating raw materials, based on world experience. We carried out mathematical calculations, provided the change in the temperature field of the drying chamber over time, and we also performed industrial experiment. Based on our results we determined the optimal number of heating sources of raw materials, taking into account the dimensions of the drying chamber. The authors propose a technical solution with which a uniform temperature field can be obtained in the drying chamber. Thus, the uniformity of the chamber heating will be increased, and large operating costs associated with leakage of oil from the grains will be disappeared.
Currently, the global issue for countries is the search for raw materials and the production of bioenergy within their country; bioenergy also includes biodiesel fuels. One of the most promising biodiesel fuels is the green diesel fuel produced by the hydrogenation of vegetable oils. Three methods have been proposed to obtain high-quality biodiesel and environmentally friendly diesel fuel: compounding green diesel with hydro-treated diesel fuel, compositions of the improved fuel «green diesel» with bio-additives, and two-component mixtures of environmentally friendly diesel fuel with bio-additives. Using these methods, it is possible to produce fuel for diesel engines with improved lubricating properties, the wear scar diameter is reduced to 232 microns, according to EN 590: 2009, this value standard is up to 460 microns. The optimal quantitative composition of three-component environmentally friendly diesel fuel with improved lubricity was established. The dependence of the change in the lubricating properties of environmentally friendly diesel fuel on the quantitative and qualitative composition are established. A mathematical equation describing the dependence of the change in the corrected wear spot on the amount of anti-wear additive in the green diesel fuel is derived. Three-component compositions of environmentally friendly diesel fuel make it possible to obtain fuel that meets the requirements of the EN 590: 2009 standard and to expand the resources for obtaining fuel, as well as to improve the environmental and operational characteristics of the fuel.
Equipment with diesel engines is used in all mining enterprises. Monorail diesel transport is of great importance in coal mines, as it facilitates the heavy labor of workers when transporting materials and people, fixing mining workings, refueling and repairing equipment, which leads to an increase in the speed of tunneling operations. Reducing the concentration of harmful gases from diesel-hydraulic locomotives at the workplaces of coal mine locomotive drivers can be ensured by the use of additives to diesel fuel that reduce the volume of harmful gas emissions during the operation of diesel-hydraulic locomotives. Additive ester-based on vegetal oil in the amount of 5 mass % in a mixture with hydrotreated diesel fuel reduces the concentration of carbon monoxide by 19-60 %, nitrogen oxides by 17-98 %, depending on the operating mode of the engine, the smoke content of the exhaust gases is reduced to 71 %. There is an improvement in working conditions at the workplace of the driver of a diesel-hydraulic locomotive by the chemical factor due to the reduction of the class of working conditions from 3.1. to 2. Оборудование с дизельными двигателями используется на всех предприятиях горнодобывающей промышленности. Большое значение имеет монорельсовый дизельный транспорт в угольных шахтах, так как он облегчает тяжесть труда работников при транспортировке материалов и людей, креплении горных выработок, заправке и ремонте оборудования, что приводит к повышению скорости проходческих работ. Снижение концентрации вредных газов от дизель-гидравлических локомотивов на рабочих местах машинистов локомотива угольных шахт может обеспечиваться применением добавок к дизельному топливу, уменьшающих объемы выбросов вредных газов при работе дизель-гидравлических локомотивов. Добавка на основе сложных эфиров растительных масел в количестве 5 мас.% в смеси с гидроочищенным дизельным топливом снижает концентрацию угарного газа на 19-60 %, оксидов азота на 17-98 % в зависимости от режима работы двигателя, дымность отработанных газов при этом снижается до 71 %. Происходит улучшение условий труда на рабочем месте машиниста дизель-гидравлического локомотива по химическому фактору за счет понижения класса условий труда с 3.1. до 2.
In the modern conditions of the growing consumer market for environmentally friendly industries, the issue of optimizing resource-intensive and energy-intensive technological chains is acute. One of the most expensive stages is the storage of grain—raw materials for the production of biodiesel. This is due to there being no unified temperature control system. In this paper, the authors have developed a mathematical model and a hardware–software complex that allows for the measurement of the temperature field in grain storage areas. To address this challenge, the authors employed methodologies derived from spatial distributed systems to construct a mathematical model. The development of a technical device and the implementation of a software module for processing the measured data in C++ Builder were then undertaken.
The research related to the production of ecologically friendly diesel fuel by introducing a basic hydro treated fuel antiwear bioadditives prepared based on different raw materials. An analysis of existing anti-wear additives was carried out. The main characteristics of samples of environmentally friendly diesel fuel are determined. A reduction in the diameter of the fuel wear spot has been established, which means that a decrease in the wear of diesel engine parts has been achieved and the duration of its use has been increased. Studied the positive effects of the use of supplements to reduce the emission of exhaust gases into the atmosphere.