Hiba H. Darwish

Hiba H. Darwish

Yarmouk University, Irbid, Jordan
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
Ayman Al-QuraanAyman Al-Quraan
Ayman Al-Quraan
Estimating wind energy at a specific wind site depends on how well the real wind data in that area can be represented using an appropriate distribution function. In fact, wind sites differ in the extent to which their wind data can be represented from one region to another, despite the widespread use of the Weibull function in representing the wind speed in various wind locations in the world. In this study, a new probability distribution model (normal PDF) was tested to implement wind speed at several wind locations in Jordan. The results show high compatibility between this model and the wind resources in Jordan. Therefore, this model was used to estimate the values of the wind energy and the extracted energy of wind turbines compared to those obtained by the Weibull PDF. Several artificial intelligence techniques were used (GA, BFOA, SA, and a neuro-fuzzy method) to estimate and predict the parameters of both the normal and Weibull PDFs that were reflected in conjunction with the actual observed data of wind probabilities. Afterward, the goodness of fit was decided with the aid of two performance indicators (RMSE and MAE). Surprisingly, in this study, the normal probability distribution function (PDF) outstripped the Weibull PDF, and interestingly, BFOA and SA were the most accurate methods. In the last stage, machine learning was used to classify and predict the error level between the actual probability and the estimated probability based on the trained and tested data of the PDF parameters. The proposed novel methodology aims to predict the most accurate parameters, as the subsequent energy calculation phases of wind depend on the proper selection of these parameters. Hence, 24 classifier algorithms were used in this study. The medium tree classifier shows the best performance from the accuracy and training time points of view, while the ensemble-boosted trees classifier shows poor performance regarding providing correct predictions.

7 August 2023 in Processes
Verified
Journal Article
Open access
PDF file
Ayman Al-QuraanAyman Al-Quraan
Ayman Al-Quraan
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
AMAhmad B. Malkawi
Ahmad B. Malkawi
Climate change is one of the most essential phenomena studied by several researchers in the last few decades. The main reason this phenomenon occurs is greenhouse gases (GHG), chiefly CO2 emissions. About 30% of the created GHG emissions are achieved by electricity generation. This article investigates the role of renewable energy projects in Jordan, specifically wind and solar energy, in mitigating climate change and water consumption reduction using RETScreen software. It was found that the cumulative water consumption reduction from 2017 to 2021 due to the use of wind and solar projects is equal to 6.9491 × 109 gallons. Finally, the results show that the future dependence on renewable energy projects in Jordan to meet the growth in demand by the year 2030 reduces the expected increment in the climate temperature by 1.047 °C by that year.

23 September 2025 in Energy Reports
Verified
Journal Article
Open access
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
IAIssa AlHmoud
Issa AlHmoud
ATAnish Chand Turlapaty
Anish Chand Turlapaty
BGBalakrishna Gokaraju
Balakrishna Gokaraju

24 February 2026 in IEEE Access
Verified
Journal Article
Open access
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
KKKrupa V. Khapper
Krupa V. Khapper
BGBalakrishna Gokaraju
Balakrishna Gokaraju
RTRaymond Tesiero
Raymond Tesiero
Heating, Ventilation, and Air Conditioning (HVAC) systems are among the largest energy consumers in buildings, and their control strategies play a crucial role in achieving energy efficiency, indoor comfort, and sustainability. This review examines the main HVAC control strategies, ranging from traditional methods to Internet of Things (IoT) based and Artificial Intelligence (AI) driven approaches. In addition, occupancy-based control strategies and energy-efficient designs are critically examined for their potential to enhance system responsiveness and reduce operational costs. More than 100 recent research studies were systematically analyzed and compared across key parameters such as the objective of the study, the used control technique, strength, weakness, opportunity, threat, software/tool used, building type (residential, commercial, or industrial), control scale (single zone/multi-zone), and specific HVAC part controlled (e.g., AHU, VAV). To enable consistent comparison, a Multi-Objective Robustness Criterion (MORC) is used to assess how different control strategies balance energy consumption, thermal comfort, and Indoor Air Quality (IAQ) under changing conditions and how each control technique overcomes the limitations of the previous ones. In addition, the review also introduces a case analysis based on three U.S. cities, Charlotte, Greensboro, and Raleigh, to demonstrate the impact of outdoor climate variations and occupancy pattern on HVAC energy consumption. The results show that even a one-degree change in outdoor temperature can cause a considerable increase in annual energy consumption. Moreover, occupancy-based HVAC control can save more than $7,000 annually in the studied educational building. These findings highlight the strong impact of location-specific temperature differences on HVAC performance and emphasize the need for adaptive, climate-aware control strategies, while also pointing to future directions for smarter and more energy-efficient HVAC systems.

24 February 2026 in IEEE Access
Verified
Journal Article
Open access
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
RTRaymond Tesiero
Raymond Tesiero
BGBalakrishna Gokaraju
Balakrishna Gokaraju
This study presents a comprehensive techno-economic and environmental feasibility analysis to identify the most viable renewable energy configuration for supplying 50% of Greensboro's city electrical load. The analysis aims to determine an optimal balance between system performance, cost efficiency, and environmental sustainability. The research employs an extensive hourly dataset, including solar irradiance, air temperature, wind speed, precipitation, relative humidity, atmospheric pressure, earth temperature and load consumption, and incorporates time-series forecasting of key variables (solar irradiance, wind speed, air temperature, and load) using neural network models (NAR, NARX, and NIO). The NARX model was identified as the most accurate based on performance indices (RMSE, MAE, and R²). The forecasted data was utilized to model and evaluate five primary system scenarios, which comprised varying shares and combinations of PV panels, wind turbines, and battery energy storage. Each configuration was rigorously assessed using a multi-objective framework of distinct objective functions, designed to achieve both economic and environmental criteria. A Genetic algorithm-based multi-objective optimization framework is employed for system sizing, with results validated against RETScreen software. The results indicate that the fourth scenario, which integrates PV, wind, and battery storage systems, minimizes total cost to approximately 12 million while achieving a CO₂ reduction of more than 1 million kg and covering more than 50% of the load. This underscores the hybrid system's value in providing a more reliable, robust, and ultimately more effective energy supply.

14 May 2026 in IEEE Sensors Letters
Verified
Journal Article
Open access
Hiba H. DarwishHiba H. Darwish
Hiba H. Darwish
RTRaymond Tesiero
Raymond Tesiero
BGBalakrishna Gokaraju
Balakrishna Gokaraju
ATAmanuel Abrdo Tereda
Amanuel Abrdo Tereda
Thermal comfort assessment is a critical factor in indoor environment quality, directly influencing occupant well-being and energy efficiency in smart buildings. Conventional thermal comfort monitoring systems rely on multiple environmental sensors, such as temperature, relative humidity, and air speed. This letter proposes a novel approach for indoor thermal comfort classification using thermal images only, eliminating the need for multiple physical sensors. A convolutional neural network (CNN) is developed to classify thermal images into two categories: thermally comfortable and thermally uncomfortable. The ground truth labels are obtained based on the American Society of Heating, Refrigerating, and Air-Conditioning Engineers standards. Thermal images are preprocessed and used to train the CNN model through supervised learning. Experimental results demonstrate a high level of agreement between the CNN-based predictions and the traditional predict mean vote-based comfort assessment. The proposed model achieved an overall classification accuracy of 91%, with F1-scores of 0.89 and 0.92 for comfortable and uncomfortable classes, respectively. These results indicate that thermal images contain sufficient spatial and temperature-related information to accurately characterize indoor thermal comfort conditions. The proposed approach provides a fast-response and scalable alternative to traditional multisensor thermal comfort monitoring systems. This study highlights the potential of thermal imaging combined with deep learning as a viable solution for real-time thermal comfort evaluation in smart building applications.