The biological denitrification of low-C/N wastewater is a great challenge in treatment plants due to the lack of microorganisms with heterotrophic nitrification–aerobic denitrification (HN-AD) abilities. In this study, Bacillus sp. L2 was isolated from aeration tank water samples using a nitrification medium and screened for its ability to perform HN-AD in low-C/N wastewater. The strain showed a maximum NH4+-N removal rate of 98.37% under low-C/N conditions. In the presence of a mixed N source, strain L2 was capable of completely removing NH4+-N within 24 h. Furthermore, optimal nitrogen removal conditions for strain L2 were found to be C/N = 9, pH = 9, and sodium acetate as the C source. Under optimal conditions, the strain was able to maintain a high NH4+-N removal rate under 0–3% salinity and an NH4+-N concentration of 200 mg/L or less. The denitrification pathways of strain L2 were NH4+→NH2OH→NO2−(↔NO3−)→NO→N2O→N2 and NH4+→NH2OH→NO→N2O→N2. Furthermore, semi-continuous wastewater treatment was conducted using immobilized technology, which resulted in more than 82% NH4+-N removal after three cycles of reuse. This study demonstrates the great potential of Bacillus sp. L2 in wastewater treatment applications.
Pullulanase (EC 3.2.1.41) belongs to the amylase family and is often used alone or in combination with other amylases in the industrial production of starch-based products. This enzyme is often required in industrial production because of its better stability. We here truncated the pullulanase gene from the deep-sea hydrothermal anaerobic archaeon Thermococcus siculi HJ21 and obtained Pul-HJΔ782, which is a member of the α-amylase family GH57. The results revealed that the optimum temperature for Pul-HJΔ782 was 100 °C, and its thermostability at 100 °C improved after truncation. Less than 15% of its enzyme activity was lost after 1 h of incubation at 100 °C, and 57% activity remained after 5 h of treatment. Truncation significantly improved the overall pH tolerance range of Pul-HJΔ782, and its stability in the pH range 4–8 was over 80% relative activity from an average of 60%. The sequence and structural model of Pul-HJΔ782 was analyzed, and its instability index was reduced significantly. Furthermore, the hydrolysates of the truncated and wild-type pullulanase were analyzed, and the enzymatic digestion efficiency of the truncated Pul-HJΔ782 was higher.
Porous starch, a modified starch containing numerous micropores, has significant application potential due to its excellent absorbency. However, traditional enzymatic hydrolysis methods exhibit low efficiency. This study improved porous starch production from sweet potato by combining physical pretreatments (ultrasonic, moist heat, microwave) with dextranase hydrolysis. Among these, microwave-assisted enzymatic hydrolysis rapidly created porous starch with a compact pore structure without introducing new chemical groups. The resulting starch exhibited increased solubility (5.22%) and decreased swelling power (6.92%), enhancing its physicochemical characteristics. Remarkably, oil absorption capacity rose from 51.02% to 102.79%, and water absorption improved from 58.63% to 120.40%, attributed to increased porosity and specific surface area. These advancements offer an efficient method to produce sweet potato porous starch with superior absorption properties, presenting promising opportunities for application in the food and pharmaceutical industries.
In this study, an actinomycete was isolated from sea mud. The strain K1 was identified as Saccharomonospora sp. by 16S rDNA. The optimal enzyme production temperature, initial pH, time, and concentration of the inducer of this actinomycete strain K1 were 37 °C, pH 8.5, 72 h, and 2% dextran T20 of medium, respectively. Dextranase from strain K1 exhibited maximum activity at 8.5 pH and 50 °C. The molecular weight of the enzyme was <10 kDa. The metal ions Sr2+ and K+ enhanced its activity, whereas Fe3+ and Co2+ had an opposite effect. In addition, high-performance liquid chromatography showed that dextran was mainly hydrolyzed to isomaltoheptose and isomaltopentaose. Also, it could effectively remove biofilms of Streptococcus mutans. Furthermore, it could be used to prepare porous sweet potato starch. This is the first time a dextranase-producing actinomycete strain was screened from marine samples.
Dextranase, also known as glucanase, is a hydrolase enzyme that cleaves α-1,6 glycosidic bonds. In this study, a dextranase-producing strain was isolated from water samples of the Qingdao Sea and identified as Microbacterium sp. This strain was further evaluated for growth conditions, enzyme-producing conditions, enzymatic properties, and hydrolysates. Yeast extract and sodium chloride were found to be the most suitable carbon and nitrogen sources for strain growth, while sucrose and ammonium sodium were found to be suitable carbon and nitrogen sources for fermentation. The optimal pH was 7.5, with a culture temperature of 40 °C and a culture time of 48 h. Dextranase produced by strain XD05 showed good thermal stability at 40 °C by retaining more than 70% relative enzyme activity. The pH stability of the enzyme was better under a weak alkaline condition (pH 6.0–8.0). The addition of NH4+ increased dextranase activity, while Co2+ and Mn2+ had slight inhibitory effects on dextranase activity. In addition, high-performance liquid chromatography showed that dextran is mainly hydrolyzed to maltoheptanose, maltohexanose, maltopentose, and maltootriose. Moreover, it can form corn porous starch. Dextranase can be used in various fields, such as food, medicine, chemical industry, cosmetics, and agriculture.