Crown fires are extremely dangerous, very difficult to fight and often have a rate of spread over 100 times more than a surface fire. Therefore, it is important to determine the type of forest fire in the early detection based on wireless sensor networks (WSNs) to adopt the proper strategy to fight the fire. It is shown that this could be done analyzing the noise power spectrum of forest fires: surface fires noise spectrum can be modeled as the red noise (gradual increase of trend line amplitude toward lower frequencies), while for crown fires noise spectrum trend line has an almost bell-shaped (Gaussian) type. The noise frequency range is relatively narrow for crown fires and ranged from 250 to 450 Hz. The intermediate type of fires (strong surface fire and incipient crown fire) has a transient noise spectrum from broadband red to narrowband Gaussian. The article presents the spectrums of 9 different forest fires. The different trend line of the forest fire noise power spectrum is the parameter that can be used to determine the type of forest fire in WSNs.
4 September 2019 in Journal of Electromagnetic Waves and Applications
LoRa is a relatively new proprietary communication technology that allows long-range communication distances while consuming very little power. It utilizes license-free Industrial, Scientific and Medical ISM frequency bands to exchange information at low data rates. LoRa is favourable when looking for limited exchange of data and low-cost devices and infrastructure. This work presents some preliminary propagation measurements in a typical urban environment by using prototype transmitters and receivers working in a private network. Results highlight that LoRa can be used as a communication technology for different ad-hoc networks deployed in an urban area.
The paper presents the experimental implementation of a method to localize RFID tags in an outdoor environment using UAV. During the installation phase, it is possible to measure the coordinates of the installation point using a topographic GNSS receiver. The tags positions can evolve with time and after a specific desired period of time (e. g. 1 month or 1 year) it is necessary to relocate them. This can be done estimating the distance between the tags and a UAV, exploiting the measurements of the Received Signal Strength Indicator (RSSI). The tags are placed over an outdoor test area and a large amount of RSSI measurements are made in different position, well distributed in space, using a UAV equipped with a specific tag reader. On such data, a multilateration-based localization algorithm is applied achieving good results. The description of RFID tags is reported together with the localization algorithm, the test description and the preliminary results.
RIFD technologies are applied in a various number of environmental monitoring applications. Efficient energy management is one of the most important prerequisites for the realization of such systems and the power consumption of the RFID tag during radio transmissions must be kept low. The proposed system is composed by the RFID tags distributed on the territory and a reader installed on an Unmanned Aerial Vehicle (UAV). The idea is to use the UAV to collect data from the RFID sensors scattered throughout the area by simply approaching them, flying above them, and downloading measured data. This solution can be adopted to implement a grid of independent RFID sensors covering a large area, or to query sensors located in dangerous scenarios for humans. RFID tags are equipped with measuring sensors and store locally the measured parameters; the reader is mounted on the UAV and through an appropriate communication protocols it identifies the tags, downloads the data and sends them to the Ground Control Station (GCS). At the GCS a technician can control the reader through a GUI console: it is possible to start the discovery, download the sensor data (manually or automatically) and clear the RFID tags memory. An ad-hoc mechanisms has also been implemented to join fast tag discovery procedure, fast data downloading and energy saving. The present paper describes the system, presents the testing methodology and analyses some achieved performances in a test scenario.
LoRa (Long Range) is a proprietary radio communication technology exploiting license-free frequency bands, allowing low-rate information exchange over long distances with very low power consumption. Conventional environmental monitoring sensors have the disadvantage of being in fixed positions and distributed over wide areas, thus providing measurements with a spatially insufficient level of detail. Since public transport vehicles travel continuously within cities, they are ideal to house portable monitoring systems for environmental pollution and meteorological parameters. The paper presents a feasibility analysis of a Wireless Sensor Network (WSN) to collect this information from the vehicles conveying it to a central node for processing. The communication system is realized by deploying a layer-structured, fault-resistant, multi-hop Low Power Wide Area Network (LPWAN) based on the LoRa technology. Both a theoretical study about electromagnetic propagation and network architecture are addressed with consideration of potential practical network realization.
1 January 2017 in Journal of Physics: Conference Series