This review covers the sustainable development of advanced improvements in CO ₂ capture and utilization.

Recently, lithium containing ceramic based high-temperature CO₂ sorbents have received tremendous attention due to their high CO₂ capture capacity, low regeneration temperatures, and relatively high stability.

Synthetic zeolites are widely used as catalysts/carriers for many petrochemical reactions and in refining processes. These materials are usually synthesized in a powder form and must be shaped prior to use in industrial reactors. This review presents the state-of-the-art of the zeolite shaping technology describing the main modifications induced by the interactions between the zeolite and the binder. Additionally, a strategy is presented to overcome the diffusion limitations associated to the microporous structure of zeolites, consisting in the introduction of hierarchical porosity in the binder. Several developments in the field of hierarchical aluminas are summarized in this article, highlighting the possibility to design different ordered/disordered mesoporous and macroporous structures.

In this review the CO ₂ adsorption mechanisms of MOF-74-Mg, HKUST-1, SIFSIX-3-M, and ZIF-8 are explored, highlighting their preferential adsorption sites, CO ₂ –MOF complex configuration, adsorption dynamics, bonding angle, and water stability.

The use of deep eutectic solvents (DES) as media for the preparation of metal- and covalent organic frameworks (MOFs and COFs) and their post-synthetic modification towards composites is reviewed.

In this work, we report on a novel sodium dodecyl sulfate (SDS)-assisted magnesium oxide (MgO)-based porous adsorbent synthesized by hydrothermal method for intermediate CO₂ capture. For industrial MgO, its CO₂ adsorption capacity is normally less than 0.06 mmol g⁻¹, with a specific surface area as low as 25.1 m² g⁻¹. Herein, leaf-like MgO nanosheets which exhibited a disordered layer structure were fabricated by the introduction of SDS surfactants and the control of other synthesis parameters. This leaf-like MgO adsorbent showed an excellent CO₂ capacity of 0.96 mmol g⁻¹ at moderate temperatures (~300 °C), which is more than ten times higher than that of the commercial light MgO. This novel mesoporous MgO adsorbent also exhibited high stability during multiple CO₂ adsorption/desorption cycles. The excellent CO₂ capturing performance was believed to be related to its high specific surface area of 321.3 m² g⁻¹ and abundant surface active adsorption sites. This work suggested a new synthesis scheme for MgO based CO₂ adsorbents at intermediate temperatures, providing a competitive candidate for capturing CO₂ from certain sorption enhanced hydrogen production processes.