Khairul Nizam Tahar

Prof. Dr. Khairul Nizam Tahar


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2019 in Measurement
Verified
Journal Article
Closed access
ASAzri Mat Saad
Azri Mat Saad
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR

21 August 2013 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR
This paper presents a novel method of unmanned aerial vehicle image processing using photogrammetric technique. The study area consist different slope class which involves undulating area around the Skudai area, Malaysia. All photogrammetric methods were applied in this study including selection of test area, flight planning, camera calibration and image processing orientation. A new ground control point configurations is introduced in this study as a generic approach in unmanned aerial vehicle photogrammetric block. These configurations are used to determine the best photogrammetric results based on number of ground control points in the photogrammetric block during image processing. The objective of this study is to determine the best configuration for photogrammetric block in order to produce the best photogrammetric products. Photogrammetric image processing involves two main orientations which are known as interior orientation and exterior orientation. Interior orientation involves the parameters of camera in order to calibrate the image in the same position as during the image acquisition. Exterior orientation involves the measurement of tie points to tie up all images in the strips until photogrammetric block. In this study, six ground control point configurations were tested to determine the best photogrammetric results. In this study, two main photogrammetric results were produced namely digital orthophoto and digital elevation model. The verification results show that all configurations recorded coefficient percentage of more than 97% accuracy for the six configurations. The validation results conclude that ground control point plays an important role in photogrammetric block to acquire the accurate photogrammetric results. In this study eight and nine ground control point configurations are the best configurations among the others. Qualitatively, vector plot error for easting and northing coordinates can be viewed graphically to distinguish the error and direction for all configurations which has been proposed in this study.

1 October 2018 in International Journal of Optics
Verified
Journal Article
Open access
PDF file
MZMuhammad Akmal Zulkipli
Muhammad Akmal Zulkipli
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR
Unmanned Aerial Vehicles (UAVs) can be used for close range mapping. In engineering survey works, the conventional survey involves huge cost, labour, and time. Low-cost UAVs are very practical in providing reliable information for many applications such as road design. UAVs can provide the output that meets the accuracy of engineering surveys and policies, especially for small-scale mapping. UAVs are also a competitive technology which is stable and rapidly developing, same as other surveying technologies. This study investigates the performance of multirotor UAV for road design. This study involves four phases which consist of preliminary study, data collection, data processing, and analysis. This study focuses on the UAV as a tool to capture data of the ground from a certain altitude. The analysis includes UAV flight planning, image acquisition, and accuracy assessment of road design. It can be concluded that UAVs can be used to provide data for road design with reliable accuracy.

1 November 2013
Verified
Conference Paper
Closed access
AAAnuar Ahmad
Anuar Ahmad
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR
WUWani Sofia Udin
Wani Sofia Udin
KHKhairil Afendy Hashim
Khairil Afendy Hashim
NDNorHadija Darwin
NorHadija Darwin
SAShahrul Mardhiah Azmi
Shahrul Mardhiah Azmi
Digital aerial imagery (DAI) can be acquired using digital mapping camera attached to light aircraft. The DAI is used for the production of topographic and thematic map. The cost of acquiring DAI is very expensive and suitable for large area coverage. The acquisition of DAI is not economical and suitable for small area coverage. Therefore an alternative method should be used to fulfill this need. There are two alternative methods that can be used for acquisition of DAI which include using a small format digital camera attached to light aircraft and using a small format attached to an unmanned aerial vehicle (UAV). UAV system has been reported used in various and diversified applications such as mapping applications (eg. map revision, landslide, coastal erosion, archaeology, forestry), industrial application (eg. engineering, crash accident), Geographic Information System (GIS) applications and others. In this study, micro unmanned aerial vehicle (UAV) systems which comprise of fixed wing UAV flying and rotary UAV are attached with small format high resolution digital camera to acquire DAI for the purpose of mapping at the flying height of 300m at 100m respectively. The micro UAVs were flown autonomously (i.e automatically) and a series of DAIs of a slope using fixed wing UAV and a stream using rotary UAV were acquired rapidly within short period. Ground control point (GCP) and check point (CP) were established using the Global Positioning System and conventional Total Station techniques around the study area for the slope and stream respectively for the purpose of digital image processing and accuracy assessment. The DAIs were processed to produce photogrammetric output such as digital elevation model (DEM) and orthophoto. All these photogrammetric products were successfully produced and assessed. The achievable accuracy is less than ±1m for slope mapping and ±0.280m for stream mapping. In this study, it is proven that the micro UAV system can be used for mapping which cover small area. As conclusion, micro UAV is suitable for mapping small area, rapid data acquisition, accurate, low cost and can be employed for various applications.

1 October 2016 in Advances in Engineering Software
Verified
Journal Article
Closed access
MOMuhammad Ridhwan Osman
Muhammad Ridhwan Osman
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR

1 March 2015
Verified
Conference Paper
Closed access
MAMuhammad Salihin Ahmad Azmil
Muhammad Salihin Ahmad Azmil
NYNorsuzila Ya'Acob
Norsuzila Ya'Acob
KHAIRUL NIZAM TAHARKHAIRUL NIZAM TAHAR
KHAIRUL NIZAM TAHAR
SSSuzi Seroja Sarnin
Suzi Seroja Sarnin
The purpose of the Fire and Rescue Service is to protect human life, our property, and Earth natural resources from fire and other emergencies. With fluctuation in demands, the Fire and Rescue Service must equip with the best techniques, training regime and equipment to meet public expectations. Mitigation, preparedness and risk management have taken on new benefit with challenges facing the fire service today. Fast response cannot be achieved without good planning and preparedness. As a result, a monitoring system of alarm for fire detection using Arduino microcontroller was design. The circuit are includes with a buzzer, smoke sensor and a camera. All the data taken from smoke sensor and camera will be send to data monitoring system and be display on monitoring system wirelessly.