Due to the rapid development of urban rail transit and the development and use of underground space, foundation pit construction near existing subway tunnels is becoming increasingly common. When adjacent foundation pit projects are being constructed, it is difficult to avoid the influence on existing subway tunnels, which threatens the safe operation of subway tunnels. Thus, this study focused on the stability of the adjacent construction of foundation pits and twin shield tunnels. The finite element limit analysis (FELA) method was used to analyze the influences of construction scheme and relative position of the twin shield tunnels and adjacent foundation pit on the global stability of adjacent construction. Based on the research results, the guidance and design for the construction scheme and relative position are provided. The stability analysis on the foundation pit during the construction process is performed. The criteria of adjacent influential partition are proposed, and the influence of various input parameters (c/γD, φ, L/D and C/D) on the global stability of adjacent construction is discussed, respectively. A new design equation of safety factor of global stability of adjacent construction is obtained by curve fitting.
As urban rail transit networks age, understanding the synergistic impacts of multi-defect interactions on tunnel structural safety has become critical for underground infrastructure maintenance. This study investigates defect interaction mechanisms in shield tunnels and cross passages of Beijing Metro Line 8, integrating field monitoring, numerical simulations, and Bayesian network analysis. Long-term field surveys identified spatiotemporal coupling characteristics of four key defects—lining leakage, structural voids, material deterioration, and deformation—while revealing typical defect propagation patterns such as localized leakage at track beds and drainage pipe-induced voids. A 3D fluid–solid coupling numerical model simulated multi-defect interactions, demonstrating that defect clusters in structurally vulnerable zones (e.g., pump rooms) significantly altered pore pressure distribution and intensified displacement, whereas void expansion exacerbated lining uplift and asymmetric ground settlement. Stress concentrations were notably amplified at tunnel–cross passage interfaces. The Bayesian network risk model further validated the dominant roles of defect volume and burial depth in controlling structural safety. Results highlight an inverse correlation between defect severity and structural integrity. Based on these findings, a coordinated maintenance framework combining priority monitoring of high-stress interfaces with targeted grouting treatments is proposed, offering a systematic approach to multi-defect risk management that bridges theoretical models with practical engineering solutions.
Shield tunnels in operation are often affected by complex geological conditions, environmental factors, and structural aging, leading to cumulative damage in the segments and, consequently, increased deformation that compromises structural safety. To investigate the deformation behavior of tunnel linings under random damage conditions, this study integrates finite element numerical simulation with deep learning techniques to analyze and predict the deformation of shield tunnel segments. First, a refined three-dimensional finite element model was established, and a random damage modeling method was developed to simulate the deformation evolution of tunnel segments under different damage ratios. Additionally, a statistical analysis was conducted to assess the uncertainty in deformation caused by random damage. Furthermore, this study introduces a convolutional neural network (CNN) surrogate model to enable the rapid prediction of shield tunnel deformation under random damage conditions. The results indicate that as the damage ratio increases, both the mean deformation and its variability progressively rise, leading to increased deformation instability, demonstrating the cumulative effect of damage on segment deformation. Moreover, the 1D-CNN surrogate model was trained using finite element computation results, and predictions on the test dataset showed excellent agreement with FEM calculations. The surrogate model achieved a correlation coefficient (R2) exceeding 0.95 and an RMSE below 0.016 mm, confirming its ability to accurately predict the deformation of tunnel segments across different damage conditions. To the best of our knowledge, the finite-element–deep-learning hybrid approach proposed in this study provides a valuable theoretical foundation for predicting the deformation of in-service shield tunnels and assessing structural safety, offering scientific guidance for tunnel safety evaluation and damage repair strategies.