The integration of polymer materials with self-healing features into advanced lithium batteries is a promising and attractive approach to mitigate degradation and, thus, improve the performance and reliability of batteries. Polymeric materials with an ability to autonomously repair themselves after damage may compensate for the mechanical rupture of an electrolyte, prevent the cracking and pulverization of electrodes or stabilize a solid electrolyte interface (SEI), thus prolonging the cycling lifetime of a battery while simultaneously tackling financial and safety issues. This paper comprehensively reviews various categories of self-healing polymer materials for application as electrolytes and adaptive coatings for electrodes in lithium-ion (LIBs) and lithium metal batteries (LMBs). We discuss the opportunities and current challenges in the development of self-healable polymeric materials for lithium batteries in terms of their synthesis, characterization and underlying self-healing mechanism, as well as performance, validation and optimization.
Transitioning toward a carbon‐negative direction necessitates continued development and enhancement of existing lithium battery technologies. A key impediment for these technologies is the utilization of flammable organic solvent‐based electrolytes, which pose significant safety risks. Furthermore, the recyclability of batteries has not reached the level required for transitioning to a circular economy. Here, poly(ionic liquid)‐based dual network gel electrolytes are reported as safer and sustainable alternative materials. The materials employ both, dynamic (up to 45 mol%) and covalent crosslinking (up to 10 mol%), allowing the fabrication of mechanically stable gels with a high content (up to 65 wt%) of ionic liquid/salt both via thermal and photo polymerization. The dual nature of this network in interplay with other key components is systematically investigated. Mechanical stability (up to 0.7 MPa), combined with enhanced ionic conductivity (surpassing 10−4 S cm−1 at room temperature) is achieved via the synergetic combination of dynamic non‐covalent and covalent crosslinking, resulting in improved electrochemical (up to 5 V) and thermal stability (reaching 300 °C) by the embedded ionic liquid. Moreover the presence of the dynamic crosslinks facilitates reprocessing at 70 °C without comrpomising the electrochemical performance, thus reaching full recyclability and reusability.
We here demonstrate the preparation of composite polymer electrolytes (CPEs) for Li-ion batteries, applicable for 3D printing process via fused deposition modeling. The prepared composites consist of modified poly(ethylene glycol) (PEG), lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) and SiO2-based nanofillers. PEG was successfully end group modified yielding telechelic PEG containing either ureidopyrimidone (UPy) or barbiturate moieties, capable to form supramolecular networks via hydrogen bonds, thus introducing self-healing to the electrolyte system. Silica nanoparticles (NPs) were used as a filler for further adjustment of mechanical properties of the electrolyte to enable 3D-printability. The surface functionalization of the NPs with either ionic liquid (IL) or hydrophobic alkyl chains is expected to lead to an improved dispersion of the NPs within the polymer matrix. Composites with different content of NPs (5%, 10%, 15%) and LiTFSI salt (EO/Li+ = 5, 10, 20) were analyzed via rheology for a better understanding of 3D printability, and via Broadband Dielectric Spectroscopy (BDS) for checking their ionic conductivity. The composite electrolyte PEG 1500 UPy2/LiTFSI (EO:Li 5:1) mixed with 15% NP-IL was successfully 3D printed, revealing its suitability for application as printable composite electrolytes.
Vitrimers, materials with unique physical and chemical properties, offer a promising solution to address the limitations of lithium-ion batteries, enabling advancements in performance, safety, and sustainability.
Polymer electrolytes (PEs) are a promising alternative to overcome shortcomings of conventional lithium ion batteries (LiBs) and make them safer for users. Introduction of self-healing features in PEs additionally leads to prolonged life-time of LIBs, thus tackling cost and environmental issues. We here present solvent free, self-healable, reprocessable, thermally stable, conductive poly(ionic liquid) (PIL) consisting of pyrrolidinium-based repeating units. PEO-functionalized styrene was used as a co-monomer for improving mechanical properties and introducing pendant OH groups in the polymer backbone to act as a transient crosslinking site for boric acid, leading to the formation of dynamic boronic ester bonds, thus forming a vitrimeric material. Dynamic boronic ester linkages allow reprocessing (at 40 °C), reshaping and self-healing ability of PEs. A series of vitrimeric PILs by varying both monomers ratio and lithium salt (LiTFSI) content was synthesized and characterized. The conductivity reached 10−5 S cm−1 at 50 °C in the optimized composition. Moreover, the PILs rheological properties fit the required melt flow behavior (above 120 °C) for 3D printing via fused deposition modeling (FDM), offering the possibility to design batteries with more complex and diverse architectures.
We report latent catalysts for a thermally triggered transesterification in polyester vitrimers, enabling a triggered dynamic bond exchange so offering a versatile platform for reprocessable polyesters. The blocked catalysts, such as N-heterocyclic carbenes (NHC–CO2) and the organic amine salt, triazabicyclo[4.4.0]dec-5-ene (TBD)-methanesulfonic acid (MSA), TBD:MSA, are inactive under service conditions but active at elevated temperature or shear to enable a triggered, reversible covalent bond exchange. Catalyst activation was validated in model reactions with the salt TBD:MSA as an excellent candidate to promote transesterification at 150 °C with activation energies of 34–36 kJ·mol–1 as probed by melt-rheology inside a vitrimer composed of poly(2-hydroxyethyl)-acrylate (PHEA, M n = 68.7 kDa) and dimethyl glutarate (DMG). Mechanical testing confirmed that both pristine (E = 0.03 MPa) and reprocessed (E = 0.11 MPa) samples retained tensile properties, demonstrating efficient recyclability. In contrast, the blocked N-heterocyclic carbene (NHC–CO2) allowed an only one-time triggered activation, indicative of permanently crosslinked networks after its initial catalytic activity.