Transition metal sulfide (TMS)-based electrocatalysts have received considerable attention in the field of sustainable energy, especially for their high activity in the hydrogen evolution reaction (HER). This review summarizes how researchers have improved the performance of TMSs by adjusting their composition. This review introduces the research background of transition metal sulfides and clarifies the reaction mechanism of the HER and its performance evaluation indicators. Then, it elaborates on the general synthesis techniques for preparing TMS materials, including hydrothermal methods, electrochemical deposition, liquid-phase exfoliation, chemical vapor deposition, and other methods. Moreover, it discusses the realization of excellent electrocatalytic performance in the HER through doping, hole treatment, heterostructures, and multi-sulfides. Finally, this review summarizes the current challenges and future development opportunities of TMS materials in the field of water electrolysis for hydrogen production.
A nanoflower-like nickel-molybdenum alloy was synthesized by hydrothermal in situ growth of NiMoO4 nanorod arrays on nickel foam (NF) followed by gas-phase re-reduction at 600 °C. The resulting structure has a uniform porosity and high specific surface area, which improves the availability of active sites and facilitates efficient electron and mass transport. SEM and XPS analyses confirm that the formed NiMoO4 nanorods are uniformly distributed, which leads to significant optimization of their electronic structure. The electrochemical measurements revealed that the sample exhibited excellent hydrogen evolution reaction (HER) performance, with an overpotential as low as 127 mV at 100 mA cm−2 and a Tafel slope of 124 mV dec−1. CV and EIS showed that the sample had the largest electrochemically active surface area (121.3 mF cm−2) among the samples treated at different temperatures, with the smallest charge transfer resistance. In addition, the catalyst maintained high stability after 45 h of continuous operation. These results highlight the potential of NiMo/NF as a highly efficient and durable HER catalyst to help advance hydrogen energy technology.
The high cost of hydrogen production is the primary factor limiting the development of the hydrogen energy industry chain. Additionally, due to the inefficiency of hydrogen production by water electrolysis technology, the development of high-performance catalysts is an effective means of producing low-cost hydrogen. In water electrolysis technology, the electrocatalytic activity of the electrode affects the kinetics of the oxygen evolution reaction (OER) and the hydrogen evolution rate. This study utilizes the liquid phase co-precipitation method to synthesize three types of Prussian blue analog (PBA) electrocatalytic materials: Fe/PBA(Fe4[Fe(CN)6]3), Fe-Mn/PBA((Fe, Mn)3[Fe(CN)6]2·nH2O), and Fe-Mn-Co/PBA((Mn, Co, Fe)3II[FeIII(CN)6]2·nH2O). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses show that Fe-Mn-Co/PBA has a smaller particle size and higher crystallinity, and its grain boundary defects provide more active sites for electrochemical reactions. The electrochemical test shows that Fe-Mn-Co/PBA exhibits the best electrochemical performance. The overpotential of the oxygen evolution reaction (OER) under 1 M alkaline electrolyte at 10/50 mA·cm−2 is 270/350 mV, with a Tafel slope of 48 mV·dec−1, and stable electrocatalytic activity is maintained at 5 mA·cm−2. All of these are attributed to the synergistic effect of Fe, Mn, and Co metal ions, grain refinement, and the generation of grain boundary defects and internal stresses.
This study reports a straightforward and controllable two-step hydrothermal synthesis of novel Ni9S8@NiMoO4/NF nanospherical catalysts supported on nickel foam (NF), accompanied by a systematic evaluation of their performance in the electrochemical hydrogen evolution reaction (HER). Structural characterization revealed a well-defined Ni9S8–NiMoO4 interfacial region, whose synergistic interaction, combined with the distinctive nanospherical morphology, substantially increased the electrochemically active surface area and the density of reactive sites, thereby optimizing HER kinetics. In alkaline media, the Ni9S8@NiMoO4/NF catalyst demonstrated outstanding electrocatalytic performance, delivering an overpotential of only 64.2 mV at a current density of 20 mA cm−2. The catalyst also exhibited a high double-layer capacitance of 22.2 mF cm−2, reflecting a substantial active interfacial area. Long-term durability tests showed negligible performance degradation after 165 h of continuous operation at 10 mA cm−2, underscoring the catalyst’s robust structural stability and durability. X-ray photoelectron spectroscopy confirmed a uniform distribution of Ni, Mo, and S across the NF framework and revealed optimized chemical states, providing material-level evidence for the enhanced performance. Collectively, this work proposes a viable strategy for designing efficient and stable HER catalysts, contributing to the advancement of green hydrogen production and clean energy technologies.