Laser Induced Breakdown spectroscopy (LIBS) of Tantalum (Ta) plasma has been investigated. For this purpose Q-switched Nd: YAG laser pulses (λ ∼ 1064 nm, τ ∼ 10 ns) of maximum pulse energy of 100 mJ have been employed as an ablation source. Ta targets were exposed under the ambient environment of various gases of Ar, mixture (CO2: N2: He), O2, N2, and He under various filling pressure. The emission spectrum of Ta is observed by using LIBS spectrometer. The emission intensity, excitation temperature, and electron number density of Ta plasma have been evaluated as a function of pressure for various gases. Our experimental results reveal that the optical emission intensity, the electron temperature and density are strongly dependent upon the nature and pressure of ambient environment. The SEM analysis of the ablated Ta target has also been carried out to explore the effect of ambient environment on the laser induced grown structures. The growth of grain like structures in case of molecular gases and cone-formation in case of inert gases is observed. The evaluated plasma parameters by LIBS analysis such as electron temperature and the electron density are well correlated with the surface modification of laser irradiated Ta revealed by SEM analysis.
Spatial confinement effects on plasma parameters and surface morphology of laser-ablated Mg are studied by introducing a metallic blocker as well as argon (Ar) gas at different pressures. Nd: YAG laser at various fluences ranging from 7 to 28 J/cm2 was employed to generate Mg plasma. Confinement effects offered by metallic blocker are investigated by placing the blocker at different distances of 6, 8, and 10 mm from the target surface; whereas spatial confinement offered by environmental gas is explored under four different pressures of 5, 10, 20, and 50 Torr. Laser-induced breakdown spectroscopy analysis revealed that both plasma parameters, that is, excitation temperature and electron number density initially are strongly dependent upon both pressures of environmental gases and distances of blockers. The maximum electron temperature of Mg plasma is achieved at Ar gas pressure of 20 Torr, whereas maximum electron number density is achieved at 50 Torr. It is also observed that spatial confinement offered by metallic blocker is responsible for the significant enhancement of both electron temperature and electron number density of Mg plasma. Maximum values of electron temperature and electron number density without blocker are 8335 K and 2.4 × 1016 cm−3, respectively, whereas these values are enhanced to 12,200 K and 4 × 1016 cm−3 in the presence of blocker. Physical mechanisms responsible for the enhancement of Mg plasma parameters are plasma compression, confinement and pronounced collisional excitations due to reflection of shock waves. Scanning electron microscope analysis was performed to explore the surface morphology of laser-ablated Mg. It reveals the formation of ripples and channels that become more distinct in the presence of blocker due to plasma confinement. The optimum combination of blocker distance, fluence and Ar pressure can identify the suitable conditions for defining the role of plasma parameters for surface structuring.
In the manufacturing industry, surface structures and surface topographies present at functional areas of the mechanical parts play a vital role in various performance characteristics, such as corrosion resistance, weldability, and wear behaviors, etc. Copper–zinc alloys are extensively used in the manufacturing industry. Laser ablation has the potential to create a variety of surface structures on the ablated substrate. The size and geometry of such structures largely depend on the selection of process parameters and the ablation environment. In the present study, a copper–zinc alloy (95% Cu and 5% Zn) has been laser ablated under different gaseous and magnetic environments to realize a variety of micro-structuring at the ablation surfaces. The effect of plasma plume pressure on the geometry of the structures is deeply investigated through optical emission spectroscopy (OES) and scanning electron microscopy (SEM). By analytically evaluating thermal beta (βt), directional beta (βd), and containment radii (Rs) for the plasma of the Cu–Zinc alloy, the validity of magnetic confinement has been proven. In general, five types of microstructures are produced: micro-sized spherical cones, mounted ablated networks, cavities, pores, ridges, and ablation channels with uplifted cones. Moreover, it has been found that, under a magnetic environment, the geometry of the structures is distinct and well-defined compared to those structures achieved when the ablation is carried out without applying a magnetic field.
18 August 2023 in IEEE Transactions on Plasma Science
The thermal plasma setup was designed, fabricated, and successfully established. The effects of thermal plasma treatment on the surface morphological, compositional, electrical, mechanical, and wettability properties of zirconium (Zr) have been investigated. The Zr targets were treated with atmospheric Ar thermal plasma at different Ar flow rates ranging from 10 to 25 L/min and under different treatment times starting from 10 to 25 min. Scanning electron microscope (SEM) and optical analyses reveal the growth of various kinds of surface structures, such as microrods, flakes, pores, cracks, dendrites, agglomerates, and ridges on treated Zr. This growth is explainable on the basis of ion-induced localized heating, melting, collisional sputtering, Coulomb explosion, and thermal spike model. It was observed that both the size and number density of flakes decrease from 8 to 5 $\mu$ m and 87 $\times$ 10 $^{6}$ to 37 $\times$ 10 $^{6}$ cm $^{-2}$ with increasing Ar flow rate and treatment time. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses show that there are no compositional changes in Zr after Ar plasma. However, slight change in crystallite size and dislocation line density is observed. The electrical conductivity has been decreased, while hardness and wettability of Zr are increased after treatment.