In recent years, waste material recycling and reuse have attracted great interest as environmentally friendly modifiers to improve asphalt pavement performance. In this study, anhydrous calcium sulfate whiskers (ACSW), synthesized using phosphogypsum waste, and waste cooking oil (WCO), one of the most prevalent waste oils, were used together as modifiers to create an environmentally friendly asphalt mixture. In particular, WCO was used to compensate for the negative effects of ACSW on asphalt mixture performance at low temperatures. A variety of ACSW and WCO compound-modified asphalt mixtures were fabricated. High-temperature stability, medium-temperature fatigue, low-temperature anti-cracking, moisture susceptibility, repeated freeze–thaw, and long-term aging tests were conducted to comprehensively evaluate the pavement performance. Compared to the base asphalt mixture, the compound-modified asphalt mixtures were demonstrated to have better high- and low-temperature, moisture susceptibility, fatigue, anti-freezing, and anti-aging properties, especially for the 6%ACSW and 2%WCO compound-modified asphalt mixture. Therefore, the 6%ACSW and 2%WCO compound-modified asphalt mixture was ultimately selected for use in construction, as this mixture can meet the requirements for regions with cold winters and hot summers.
5 May 2021 in Structural Control and Health Monitoring
The vehicle scanning method (VSM) enables indirect structural damage detection using onboard sensors, but its application to shield tunnels remains challenging due to the high stiffness-to-mass ratio of tunnels and the presence of segmental joints. This study investigates whether segmental joints produce false-positive damage indications and evaluates a modified signal extraction strategy. A refined vehicle–tunnel coupled finite element model incorporating shear and rotational springs at segment interfaces is established. Instead of applying Variational Mode Decomposition (VMD) before filtering, the proposed strategy applies low-pass filtering prior to VMD to extract a purer driving component (DC). The DC is quantitatively compared with the previously identified optimal component (D2) in terms of energy amplitude, background suppression, and noise robustness. Results show that (1) segmental joints produce no spurious wavelet energy peaks above the detection threshold in undamaged tunnels; (2) the DC substantially outperforms D2, achieving a signal-to-background ratio of 83.1 (vs. 18.8 for D2) and a 12% higher detection rate for 5% damage under SNR = 10 dB noise; and (3) liner and support damage produce single sharp wavelet energy peaks, while joint damage produces a broadened peak spanning two adjacent elements, suggesting a potential signature for distinguishing joint-related damage from element-related damage in the cases examined. These findings suggest that the method may be applicable to jointed shield tunnels within the range of conditions considered in this numerical study, without requiring joint-specific calibration. The modified DC extraction offers a simpler and more sensitive damage indicator for practical inspection.
29 October 2024 in Journal of Testing and Evaluation
Waste recycling and reuse as road material have drawn significant attention because they improve pavement performance and reduce environmental pollution. In this study, anhydrous calcium sulfate whiskers (ACSW) were manually fabricated from phosphogypsum to produce an environmentally friendly asphalt pavement modification material. Furthermore, waste cooking oil (WCO), among the most widespread of waste oils, was employed to offset the adverse influence of ACSW on the LT properties of the asphalt. Various ACSW and WCO compound modified asphalts were designed and prepared, and their rheological properties were investigated to determine the optimum combination of ACSW and WCO. The results revealed that ACSW could strengthen the high-temperature anti-deformation of asphalt. In contrast, ACSW markedly decreased the LT anti-cracking properties. However, when WCO was introduced, the loss of LT performance caused by the ACSW was compensated. Therefore, the compound modified asphalt with 6% ACSW and 2% WCO was identified as the optimum combination because of the ideal rheological performance. Furthermore, the microscopic characteristics of the compound modified asphalt were examined via Fourier transform infrared spectroscopy, gel-permeation chromatography, and fluorescence microscopy. The microscopic analysis demonstrated that the modification caused by ACSW and WCO is only physical, and that WCO contributes to diminishing ACSW agglomeration and enhancing the uniformity of the compound modified asphalt system. This novel compound modified asphalt is anticipated to improve quality and increase waste material recycling.
To improve the accuracy and efficiency of engineering structural reliability analysis under imbalanced sample conditions, an adaptive deep neural network (ADNN) method is pro-posed. The method integrates limit state surface (LSS)-based stratified splitting, a composite loss function, and an adaptive training strategy into the DNN framework. In the proposed method, the DNN is employed to establish the mapping relationship between input variables and output responses. The LSS-based stratified splitting improves the representativeness of samples near the LSS; the composite loss function assigns greater importance to samples in critical regions, thereby enhancing the model’s ability to learn the LSS; and the adaptive training strategy is used to improve model robustness. The proposed method is validated through two nonlinear function examples and a cable-stayed bridge engineering example, in which the failure-sample proportions in the model-construction datasets range from 0.10 to 0.33. The results show that ADNN improves the approximation capability of the LSS and maintains good reliability analysis performance as the failure-sample proportion decreases. Compared with conventional surrogate models, the ADNN method achieves higher accuracy and efficiency in reliability analysis. This study provides methodological support for structural reliability analysis under imbalanced sample conditions.