Meiling Liu

Dr. Meiling Liu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2023 in Materials
Verified
Journal Article
Open access
PDF file
SZShubo Zhang Zhang
Shubo Zhang Zhang
FQFalian Qin
Falian Qin
MGMaoyuan Gong
Maoyuan Gong
ZWZihao Wu
Zihao Wu
MLMeiling Liu
Meiling Liu
WHWanxiu Hai
Wanxiu Hai
High-entropy carbide (NbTaTiV)C4 (HEC4), (MoNbTaTiV)C5 (HEC5), and (MoNbTaTiV)C5-SiC (HEC5S) multiphase ceramics were prepared by spark plasma sintering (SPS) at 1900 to 2100 °C, using metal carbide and silicon carbide (SiC) as raw materials. Their microstructure, and mechanical and tribological properties were investigated. The results showed that the (MoNbTaTiV)C5 synthesized at 1900–2100 °C had a face-centered cubic structure and density higher than 95.6%. The increase in sintering temperature was conducive to the promotion of densification, growth of grains, and diffusion of metal elements. The introduction of SiC helped to promote densification but weakened the strength of the grain boundaries. The average specific wear rates for HEC4 were within an order of magnitude of 10−5 mm3/N·m, and for HEC5 and HEC5S were within a range of 10−7 to 10−6 mm3/N·m. The wear mechanism of HEC4 was abrasion, while that of HEC5 and HEC5S was mainly oxidation wear.

5 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
MLMeiling Liu
Meiling Liu
ZSZhen Sun
Zhen Sun
PLPeng Liu
Peng Liu
WHWanxiu Hai
Wanxiu Hai
YCYuhong Chen
Yuhong Chen
AlxCoCrFeNiTi (x = 0.1, 0.3, 0.6, 1) powders were prepared via mechanical alloying and were used as binders for SPS-produced Ti(C,N)-based cermets. The effects of AlxCoCrFeNiTi binder on phase composition, morphology, room-temperature mechanical properties, and oxidation resistance of cermets were studied. The research showed that cermets with AlxCoCrFeNiTi binders exhibited a more homogeneous core–rim structure than cermets with cobalt binders. The Vickers hardness and fracture toughness of cermets with AlxCoCrFeNiTi binders increased with the aluminum molar ratio due to the grain refinement and solid solution strengthening effect of carbonitrides. After static oxidation at 1000 °C, the mass gain of the cermets with AlxCoCrFeNiTi binders changed according to a quasi-parabolic law, and the lowest mass gain was obtained in the cermet with Al0.6CoCrFeNiTi binder. The oxidation kinetics curve of the benchmark cermet with cobalt followed a linear law. The oxidation product of Ti(C,N)-based cermet with cobalt was rich in TiO2, and the Ti(C,N)-based cermets with AlxCoCrFeNiTi binders were transformed into complex oxides, such as NiMoO4, NiWO4, FeMoO4, Fe3Ti3O9, and Ni3TiO7. The oxide layer on the cermet with Al0.6CoCrFeNiTi appeared to be dense and protective, which inhibited the diffusion of oxygen into the cermet and improved the oxidation resistance of the final product.

29 April 2025 in Ceramics International
Verified
Journal Article
Closed access
MLMeiling Liu
Meiling Liu
JFJiaying Feng
Jiaying Feng
YCYajing Cao
Yajing Cao
WHWanxiu Hai
Wanxiu Hai
YCYuhong Chen
Yuhong Chen

29 March 2022 in International Journal of Modern Physics B
Verified
Journal Article
Closed access
PDF file
ZWZihao Wu
Zihao Wu
YCYuhong Chen
Yuhong Chen
WHWanxiu Hai
Wanxiu Hai
MLMeiling Liu
Meiling Liu

21 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZYZiting Yuan
Ziting Yuan
YCYuhong Chen
Yuhong Chen
FYFan Yang
Fan Yang
CHChaofan He
Chaofan He
WHWanxiu Hai
Wanxiu Hai
MLMeiling Liu
Meiling Liu
Using α-SiC powder as a raw material, with ytterbium oxide and magnesium oxide as liquid-phase sintering aids, silicon carbide ceramics were prepared via spark plasma sintering (SPS) at 1900, 2000, and 2050 °C with a 10 min dwell. As the sintering temperature increased, the grain size grew from 0.54 μm to 17.59 μm, while the thermal conductivity correspondingly increased from 122.4 W/(m·K) to 231.8 W/(m·K). Microstructural analyses revealed that elevated sintering temperatures significantly accelerated the dissolution–precipitation process, thereby inducing abnormal grain growth. Grain size is identified as the dominant factor governing the thermal conductivity of SiC ceramics. Larger grains reduce grain boundary density and interfacial thermal resistance, thereby facilitating phonon transport.

26 November 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
MGMaoyuan Gong
Maoyuan Gong
HZHai Zhang
Hai Zhang
WHWanxiu Hai
Wanxiu Hai
MLMeiling Liu
Meiling Liu
YCYuhong Chen
Yuhong Chen
SiC multiphase ceramics were prepared via spark plasma sintering using AlN and TiB2 as the second phase and Y2O3 as a sintering additive. The effects of TiB2 content (10 vol.% and 20 vol.%) and sintering temperature (1900 °C to 2100 °C) on the phase composition, microstructure, and mechanical and tribological properties of SiC multiphase ceramics were investigated. The results showed that Y2O3 reacts with Al2O3 on the surface of AlN to form the intercrystalline phase Y4Al2O9 (YAM), which promotes the densification of the multiphase ceramics. The highest density of SiC multiphase ceramics was achieved at 10 vol.% TiB2 content. Moreover, TiB2 and SiC exhibited good interfacial compatibility. In turn, a thin solid-solution layer (~50 nm) was formed by SiC and AlN at the interface. The periodic structure of SiC prevented the dislocation movement and inhibited the base plane slip. The most optimal mechanic characteristics (a density of 98.3%, hardness of 28 GPa, fracture toughness of 5.7 MPa·m1/2, and bending strength of 553 MPa) were attained at the TiB2 content of 10 vol.%. The specific wear rates of SiC multiphase ceramics were (4–8) × 10−5 mm3/N·m at 25 °C and 2.5 × 10−5 mm3/N·m at 600 °C. The wear mechanism changed from abrasion at 25 °C to a tribo-chemical reaction at 600 °C. Therefore, adding lubricious oxides of TiB2 is beneficial for the improvement in wear resistance of SiC ceramics at 600 °C.