Selecting the right model to simulate a specific watershed has always been a challenge, and field testing of watersheds could help researchers to use the proper model for their purposes. The performance of three popular Geographic Information System (GIS)-based watershed simulation models (European Hydrological System Model (MIKE SHE), Agricultural Policy/Environmental Extender (APEX) and Soil and Water Assessment Tool (SWAT)) were evaluated for their ability to simulate the hydrology of the 52.6 km² Canagagigue Watershed located in the Grand River Basin in southern Ontario, Canada. All three models were calibrated for a four-year period and then validated using an independent four-year period by comparing simulated and observed daily, monthly and annual streamflow. The simulated flows generated by the three models are quite similar and closely match the observed flow, particularly for the calibration results. The mean daily/monthly flow at the outlet of the Canagagigue Watershed simulated by MIKE SHE was more accurate than that simulated by either the SWAT or the APEX model, during both the calibration and validation periods. Moreover, for the validation period, MIKE SHE predicted the overall variation of streamflow slightly better than either SWAT or APEX.

This paper focuses on understanding the effects of projected climate change on streamflow dynamics of the Grand and Thames rivers of the Northern Lake Erie (NLE) basin. A soil water assessment tool (SWAT) model is developed, calibrated, and validated in a base-period. The model is able to simulate the monthly streamflow dynamics with ‘Good’ to ‘Very Good’ accuracy. The calibrated and validated model is then subjected with daily bias-corrected future climatic data from the Canadian Regional Climate Model (CanRCM4). Five bias-correction methods and their 12 combinations were evaluated using the Climate Model data for hydrologic modeling (CMhyd). Distribution mapping (DM) performed the best and was used for further analysis. Two future time-periods and two IPCC AR5 representative concentration pathways (RCPs) are considered. Results showed marked temporal and spatial variability in precipitation (−37% to +63%) and temperature (−3 °C to +14 °C) changes, which are reflected in evapotranspiration (−52% to +412%) and soil water storage (−60% to +12%) changes, resulting in heterogeneity in streamflow (−77% to +170%) changes. On average, increases in winter (+11%), and decreases in spring (–33%), summer (−23%), and autumn (−15%) streamflow are expected in future. This is the first work of this kind in the NLE and such marked variability in water resources availability poses considerable challenges to water resources planners and managers.

Non-point source (NPS) pollution is an important problem that has been threatening freshwater resources throughout the world. Best Management Practices (BMPs) can reduce NPS pollution delivery to receiving waters. For economic reasons, BMPs should be placed at critical source areas (CSAs), which are the areas contributing most of the NPS pollution. The CSAs are the areas in a watershed where source coincides with transport factors, such as runoff, erosion, subsurface flow, and channel processes. Methods ranging from simple index-based to detailed hydrologic and water quality (HWQ) models are being used to identify CSAs. However, application of these methods for Canadian watersheds remains challenging due to the diversified hydrological conditions, which are not fully incorporated into most existing methods. The aim of this work is to review potential methods and challenges in identifying CSAs under Canadian conditions. As such, this study: (a) reviews different methods for identifying CSAs; (b) discusses challenges and the current state of CSA identification; and (c) highlights future research directions to address limitations of currently available methods. It appears that applications of both simple index-based methods and detailed HWQ models to determine CSAs are limited in Canadian conditions. As no single method/model is perfect, it is recommended to develop a ‘Toolbox’ that can host a variety of methods to identify CSAs so as to allow flexibility to the end users on the choice of the methods.

Gully erosion susceptibility mapping (GESM) through predicting the spatial distribution of areas prone to gully erosion is required to plan gully erosion control strategies relevant to soil conservation. Recently, machine learning (ML) models have received increasing attention for GESM due to their vast capabilities. In this context, this paper sought to review the modeling procedure of GESM using ML models, including the required datasets and model development and validation. The results showed that elevation, slope, plan curvature, rainfall and land use/cover were the most important factors for GESM. It is also concluded that although ML models predict the locations of zones prone to gullying reasonably well, performance ranking of such methods is difficult because they yield different results based on the quality of the training dataset, the structure of the models, and the performance indicators. Among the ML techniques, random forest (RF) and support vector machine (SVM) are the most widely used models for GESM, which show promising results. Overall, to improve the prediction performance of ML models, the use of data-mining techniques to improve the quality of the dataset and of an ensemble estimation approach is recommended. Furthermore, evaluation of ML models for the prediction of other types of gully erosion, such as rill–interill and ephemeral gully should be the subject of more studies in the future. The employment of a combination of topographic indices and ML models is recommended for the accurate extraction of gully trajectories that are the main input of some process-based models.

Water security is the capability of a community to have adequate access to good quality and a sufficient quantity of water as well as safeguard resources for the future generations. Understanding the spatial and temporal variabilities of water security can play a pivotal role in sustainable management of fresh water resources. In this study, a long-term water security analysis of the Grand River watershed (GRW), Ontario, Canada, was carried out using the soil and water assessment tool (SWAT). Analyses on blue and green water availability and water security were carried out by dividing the GRW into eight drainage zones. As such, both anthropogenic as well as environmental demand were considered. In particular, while calculating blue water scarcity, three different methods were used in determining the environmental flow requirement, namely, the presumptive standards method, the modified low stream-flow method, and the variable monthly flow method. Model results showed that the SWAT model could simulate streamflow dynamics of the GRW with ‘good’ to ‘very good’ accuracy with an average Nash–Sutcliffe Efficiency of 0.75, R² value of 0.78, and percentage of bias (PBIAS) of 8.23%. Sen’s slope calculated using data from over 60 years confirmed that the blue water flow, green water flow, and storage had increasing trends. The presumptive standards method and the modified low stream-flow method, respectively, were found to be the most and least restrictive method in calculating environmental flow requirements. While both green (0.4–1.1) and blue (0.25–2.0) water scarcity values showed marked temporal and spatial variabilities, blue water scarcity was found to be the highest in urban areas on account of higher water usage and less blue water availability. Similarly, green water scarcity was found to be highest in zones with higher temperatures and intensive agricultural practices. We believe that knowledge of the green and blue water security situation would be helpful in sustainable water resources management of the GRW and help to identify hotspots that need immediate attention.