Sweat analysis by means of minimally invasive wearable sensors is considered a potentially disruptive method for assessing clinical parameters, with exciting applications in early medical diagnostics and high-performance sports. Electrochemical sensors and biosensors are especially attractive because of the possibility of the electronic integration of wearable devices. In this article, we review several aspects regarding the potentialities and present limitations of electrochemical sweat (bio)sensors, including: the main target analytes and their relationships with clinical conditions; most usual electrochemical techniques of transduction used according to the nature of the target analytes; issues connected to the collection of representative sweat samples; aspects regarding the associated, miniaturized electronic instrumentation used for signal processing and communication; and signal processing by machine learning.

Placing printed conductive patterns onto nonplanar substrates is a challenging task. In this work, we tested a simple method for depositing inkjet-printed conductive patterns onto 3D-printed pieces with cavities and sharp edges. First, a silver nanoparticle ink was used to print conductive patterns onto a flexible and porous substrate made of electrospun polycaprolactone (PCL). Then, the printed patterns were transferred to 3D-printed pieces made of polylactic acid (PLA) by temperature-promoted adhesion. Finally, the printed patterns were cured to render them conductive. The influence of the number of printed layers on their electrical and mechanical properties was evaluated. The printed patterns were also transferred to flexible substrates, such as thermoplastic polyurethane (TPU) and polyethylene terephthalate (PET) sheets, achieving conductivity after curing. Moreover, the printed patterns were effective for modular interconnection among successive transferred patterns, since it was possible to achieve electrical contact between them during the transfer process.

Placing printed conductive patterns onto nonplanar substrates is a challenging task. In this work we tested a simple method for depositing inkjet-printed conductive patterns on-to 3D-printed pieces with cavities and sharp edges. First, a silver nanoparticle ink was used to print conductive patterns onto a flexible and porous substrate made of electrospun polycaprolactone (PCL). Then, the printed patterns were transferred to 3D-printed pieces made of polylactic acid (PLA) by temperature-promoted adhesion. Finally, the printed patterns were cured to render them conductive. The influence of the number of printed layers on their electrical and mechanical properties was evaluated. The printed patterns were also transferred to flexible substrates such as thermoplastic polyurethane (TPU) and polyethylene terephthalate (PET) sheets achieving conductivity after curing. Moreover, the printed patterns were effective for modular interconnection among successive transferred patterns, since it was possible to achieve electrical contact between them during the trans-fer process.