Speedy ceramic sintering: Synthesizing ceramics can require heating for long times at high temperatures, making the screening of high-through-put materials challenging. C. Wang et al. developed a new ceramic-sintering technique that uses resistive heating of thin carbon strips to ramp up and ramp down temperature quickly. This method allows for the quick synthesis of a wide variety of ceramics while mitigating the loss of volatile elements. Ultrafast sintering is ideal for synthesizing many compositions to screen for ideal properties for a variety of applications, including the development of new solid-state electrolytes. Science , this issue p. 521
The shortage of clean water is one of the predominant causes of human mortality, especially in remote rural areas. Currently, solar steam generation is being adopted as an efficient, sustainable, and low-cost means for water desalination to produce clean water. However, preventing salt accumulation during operation while maintaining long-term stability and a rapid evaporation rate is a critical challenge that needs to be urgently addressed to further facilitate the practical applications of solar desalination, especially for desalinating high-salinity brine. Here, we demonstrate that a bimodal porous structure (e.g., balsa wood) can serve as an efficient and stable solar vapor generator for high-salinity brine desalination. Taking advantage of the inherent bimodal porous and interconnected microstructures of balsa wood, rapid capillary transport through the microchannels and efficient transport between the micro- and macrochannels through ray cells and pits in the bimodal evaporator can lead to quick replenishment of surface vaporized brine to ensure fast and continuous clean water vapor generation. The bimodal evaporator demonstrates a rapid evaporation rate of 6.4 kg m−2 h−1 under 6 suns irradiation and outstanding long-term stability for desalination of high salinity brine. The large vessel channels play a critical role in preventing salt from accumulating, as evidenced by controlled experiments with large vessels either blocked in the bimodal evaporator (balsa evaporator) or absent in a unimodal evaporator (e.g., cedar wood) whose porous structure occurs naturally without large vessels. Both approaches demonstrate severe salt accumulation during solar desalination due to a lack of sufficient brine replenishment from the bulk solution beneath. With its unique bimodal porous and interconnected microstructure configuration obtained by a facile and scalable fabrication method, our bimodal porous structured evaporator device represents an efficient, stable, low-cost, and environmentally friendly solar vapor generator for high-salinity brine desalination.
Nowadays, energy-saving building materials are important for reducing indoor energy consumption by enabling better thermal insulation, promoting effective sunlight harvesting and offering comfortable indoor lighting. Here, we demonstrate a novel scalable aesthetic transparent wood (called aesthetic wood hereafter) with combined aesthetic features (e.g. intact wood patterns), excellent optical properties (an average transmittance of ~ 80% and a haze of ~ 93%), good UV-blocking ability, and low thermal conductivity (0.24 W m−1K−1) based on a process of spatially selective delignification and epoxy infiltration. Moreover, the rapid fabrication process and mechanical robustness (a high longitudinal tensile strength of 91.95 MPa and toughness of 2.73 MJ m−3) of the aesthetic wood facilitate good scale-up capability (320 mm × 170 mm × 0.6 mm) while saving large amounts of time and energy. The aesthetic wood holds great potential in energy-efficient building applications, such as glass ceilings, rooftops, transparent decorations, and indoor panels.