Yong Pei

Dr. Yong Pei

Mechanical Engineering, University of Maryland, College Park, Maryland, USA
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2020 in Science
Verified
Journal Article
Closed access
PDF file
CWChengwei Wang
Chengwei Wang
WPWeiwei Ping
Weiwei Ping
QBQiang Bai
Qiang Bai
HCHuachen Cui
Huachen Cui
RHRyan Hensleigh
Ryan Hensleigh
LHLiangbing Hu
Liangbing Hu
Speedy ceramic sintering: Synthesizing ceramics can require heating for long times at high temperatures, making the screening of high-through-put materials challenging. C. Wang et al. developed a new ceramic-sintering technique that uses resistive heating of thin carbon strips to ramp up and ramp down temperature quickly. This method allows for the quick synthesis of a wide variety of ceramics while mitigating the loss of volatile elements. Ultrafast sintering is ideal for synthesizing many compositions to screen for ideal properties for a variety of applications, including the development of new solid-state electrolytes. Science , this issue p. 521

15 April 2019 in Energy & Environmental Science
Verified
Journal Article
Closed access
PDF file
SHShuaiming He
Shuaiming He
Chaoji ChenChaoji Chen
Chaoji Chen
YKYudi Kuang
Yudi Kuang
RMRuiyu Mi
Ruiyu Mi
YLYang Liu
Yang Liu
LHLiangbing Hu
Liangbing Hu
The shortage of clean water is one of the predominant causes of human mortality, especially in remote rural areas. Currently, solar steam generation is being adopted as an efficient, sustainable, and low-cost means for water desalination to produce clean water. However, preventing salt accumulation during operation while maintaining long-term stability and a rapid evaporation rate is a critical challenge that needs to be urgently addressed to further facilitate the practical applications of solar desalination, especially for desalinating high-salinity brine. Here, we demonstrate that a bimodal porous structure (e.g., balsa wood) can serve as an efficient and stable solar vapor generator for high-salinity brine desalination. Taking advantage of the inherent bimodal porous and interconnected microstructures of balsa wood, rapid capillary transport through the microchannels and efficient transport between the micro- and macrochannels through ray cells and pits in the bimodal evaporator can lead to quick replenishment of surface vaporized brine to ensure fast and continuous clean water vapor generation. The bimodal evaporator demonstrates a rapid evaporation rate of 6.4 kg m−2 h−1 under 6 suns irradiation and outstanding long-term stability for desalination of high salinity brine. The large vessel channels play a critical role in preventing salt from accumulating, as evidenced by controlled experiments with large vessels either blocked in the bimodal evaporator (balsa evaporator) or absent in a unimodal evaporator (e.g., cedar wood) whose porous structure occurs naturally without large vessels. Both approaches demonstrate severe salt accumulation during solar desalination due to a lack of sufficient brine replenishment from the bulk solution beneath. With its unique bimodal porous and interconnected microstructure configuration obtained by a facile and scalable fabrication method, our bimodal porous structured evaporator device represents an efficient, stable, low-cost, and environmentally friendly solar vapor generator for high-salinity brine desalination.

31 July 2020 in Nature Communications
Verified
Journal Article
Open access
PDF file
RMRuiyu Mi
Ruiyu Mi
Chaoji ChenChaoji Chen
Chaoji Chen
TKTobias Keplinger
Tobias Keplinger
YPYong Pei
Yong Pei
SHShuaiming He
Shuaiming He
LHLiangbing Hu
Liangbing Hu
Nowadays, energy-saving building materials are important for reducing indoor energy consumption by enabling better thermal insulation, promoting effective sunlight harvesting and offering comfortable indoor lighting. Here, we demonstrate a novel scalable aesthetic transparent wood (called aesthetic wood hereafter) with combined aesthetic features (e.g. intact wood patterns), excellent optical properties (an average transmittance of ~ 80% and a haze of ~ 93%), good UV-blocking ability, and low thermal conductivity (0.24 W m−1K−1) based on a process of spatially selective delignification and epoxy infiltration. Moreover, the rapid fabrication process and mechanical robustness (a high longitudinal tensile strength of 91.95 MPa and toughness of 2.73 MJ m−3) of the aesthetic wood facilitate good scale-up capability (320 mm × 170 mm × 0.6 mm) while saving large amounts of time and energy. The aesthetic wood holds great potential in energy-efficient building applications, such as glass ceilings, rooftops, transparent decorations, and indoor panels.

18 May 2022 in Nature
Verified
Journal Article
Closed access
PDF file
QDQi Dong
Qi Dong
YYYonggang Yao
Yonggang Yao
SCSichao Cheng
Sichao Cheng
KAKonstantinos Alexopoulos
Konstantinos Alexopoulos
JGJinlong Gao
Jinlong Gao
LHLiangbing Hu
Liangbing Hu

10 September 2019 in ACS Nano
Verified
Journal Article
Closed access
Chao JiaChao Jia
Chao Jia
Chaoji ChenChaoji Chen
Chaoji Chen
RMRuiyu Mi
Ruiyu Mi
TLTian Li
Tian Li
JDJiaqi Dai
Jiaqi Dai
LHLiangbing Hu
Liangbing Hu

10 April 2020 in ACS Nano
Verified
Journal Article
Closed access
Chaoji ChenChaoji Chen
Chaoji Chen
ZLZhihan Li
Zhihan Li
RMRuiyu Mi
Ruiyu Mi
JDJiaqi Dai
Jiaqi Dai
HXHua Xie
Hua Xie
LHLiangbing Hu
Liangbing Hu