We report on a robust, erbium-doped ultrafast fiber laser mode-locked by an artificial saturable absorber (SA) based on nonlinear polarization evolution (NPE). Unlike previous NPE fiber lasers, our cavity employs all polarization-maintaining (PM) fiber so that the laser is insensitive against environmental fluctuations. By incorporating a phase shifter in the NPE artificial SA, the oscillator possesses self-starting mode-locking ability. However, it is difficult to start pulsed operation without such a phase shifter. The simple and novel fiber laser scheme utilizing above mentioned design can directly generate 0.11 nJ, 1.20 ps ultrashort pulses at a repetition rate of 115 MHz, which is the highest repetition rate in this type of fiber lasers. We believe that this fiber oscillator offers a promising source for high repetition rate applications under less stable conditions.
For the first time, to the best of our knowledge, we experimentally observed a novel quasi-coherent noise-like pulse (NLP) in a simplified nonlinear polarization evolution mode-locking fiber laser when appropriate polarization was maintained for the lasing light through a three-dimensional rotatable polarization beam splitter inside the cavity. The degree of first-order coherence was evaluated after an interferogram measurement. The evolution of the measured shot-to-shot spectrum revealed that the NLPs possess quasi-coherence. Self-starting ultrafast soliton pulses switching to quasi-coherent NLPs at higher pump power levels were due to the preservation of the soliton features, mainly the Kelly sidebands in the spectrum. Quasi-coherent NLPs with average power of 56.58 mW and 10.4% slope efficiency were achieved with single pulse energy of 3.22 nJ.
Bound solitons have become a hot topic in the field of nonlinear optics due to their potential applications in optical communication, information processing and radar systems. However, the trapping of the cascaded bound soliton is still a major challenge up to now. Here, we propose and experimentally demonstrate a multi-pulse bound soliton fiber laser based on MoTe2 saturable absorber. In the experiment, MoTe2 nanosheets were synthesized by chemical vapor deposition and transferred to the fiber taper by optical deposition. Then, by inserting the MoTe2 saturable absorber into a ring cavity laser, the two-pulse, three-pulse and four-pulse bound solitons can be stably generated by properly adjusting the pump strength and polarization state. These cascaded bound solitons are expected to be applied to all-optical communication and bring new ideas to the study of soliton lasers.
In this paper, we numerically study the influence of saturable absorber parameters, namely, modulation depth, recovery time, and saturation energy, on the performance of an ultrafast fiber laser that is mode-locked by a hybrid scheme of a saturation absorber (SA) and a nonlinear polarization rotation (NPR). Maps of mode-locked states related to intracavity wave-plates are created to evaluate the operation of hybrid mode-locking under different modulation depths of the SA. Along with the improvement of modulation depth of the SA, the mode-locked pulse results from a combination effect of the SA and NPR. The numerical analysis reveals that the SA parameters can significantly impact the pulse profile, peak power, and operation state. Moreover, they can also impact the selection of NPR mode-locked points, resulting in variation in stable single pulse output. A higher modulation depth can suppress the unstable multiple pulses’ operation and convert them into harmonic mode-locked pulses. The obtained results indicate that the selection of appropriate SA parameters can effectively improve the output characteristics of hybrid mode-locked fiber lasers.