A combined treatment method of oxalic acid/H 2 O and γ-valerolactone/H 2 O can be used for efficient fractionation of hemicellulose, cellulose, and lignin.
Electrocatalytic hydrogenation (ECH) proved to be a highly efficient and eco-friendly approach for transforming biomass derivatives into valuable chemicals and biofuels, although in most cases, the reaction time was lengthy. In this study, a carbon loaded Pt–Co bimetallic catalyst (PtCo/C) was prepared using a simple chemical reduction method. For the ECH of furfural (FF) to furfural alcohol (FAL), as a platform molecular reaction derived from biomass, the dual catalyst system composed of H3O40PW12 (PW12) showed excellent FF conversion rate (96.7% FF conversion rate achieved in 20 minutes) and FAL selectivity (93.1%). The PtCo/C catalyst was found to possess abundant hydrogen adsorption sites (Hads), resulting in improved electrocatalytic hydrogenation and reduced electrocondensation during fluidization. Simultaneously, the occurrence of the hydrogen evolution reaction as an ancillary process was effectively inhibited at comparatively lower potentials. These discoveries offered significant groundwork and a point of reference for the catalyst advancement and the electrocatalytic conversion of biomass.
Traditional cushioning package materials, such as Expended Polystyrene (EPS) and Expanded Polyethylene (EPE), were made with petroleum-based plastics, which are harmful to the environment. It is crucial to develop renewable bio-based cushioning materials that can replace the aforementioned foams due to the rising energy demands of human society and the depletion of fossil fuels. Herein, we report an effective strategy for creating anisotropic elastic wood with special spring-like lamellar structures. Selective removal of lignin and hemicellulose by simple chemical treatment and thermal treatment of the samples after freeze-drying results in an elastic material with good mechanical properties. The resulting elastic wood has a reversible compression rate of 60% and a high elastic recovery (99% height retention after 100 cycles at 60% strain). Drop tests revealed that the elastic wood has excellent cushioning properties. In addition, the chemical and thermal treatments also enlarge the pores in the material, which is favorable for subsequent functionalization. By loading the elastic wood with a muti-walled carbon nanotube (MWCNT), electromagnetic shielding properties are achieved, while the mechanical properties of elastic wood remain unchanged. Electromagnetic shielding materials can effectively suppress various electromagnetic waves propagating through space and the resulting electromagnetic interference and electromagnetic radiation, improve the electromagnetic compatibility of electronic systems and electronic equipment, and ensure the safety of information.