Camellia oleifera fruit shell (COS) is an agricultural waste product generated in large quantities by the seed oil extraction industry. Due to its hierarchical thickness structure, COS shows huge potential in constructing porous carbon materials after thermal chemical modification. Herein, a series of COS biochars were synthesized by a carbonization-activation process and achieved excellent mercury removal performance in an aqueous environment. High-temperature carbonization was found to facilitate lignin removal and porosity generation, while retaining hydroxyl and carbonyl groups available for mercury adsorption. A volume of micropores of 594 × 10−3 cm−3/g with average pore diameter of 1.7 nm was achieved in activated COS biochar. At 550 °C, an adsorption capacity of 57.6 mg/g was realized in 1 mg/L Hg2+ solution under different pH environments. This work provides an alternative adsorbent for removing hazardous materials using sustainable bioresources.
Reducing nitrogen loss during composting with forced ventilation was comprehensively investigated in this study. Coral sand was tailored in the co-composting in the co-composting of sludge and litters. The physicochemical results revealed that forced ventilation prolonged the thermophilic phase and accelerated the substrate decomposition. With the addition of 10% native coral sand, the amount of nitrogen loss decreased by 9.2% compared with the original group. The microbial community evaluation revealed that the effect of forced ventilation on colony abundance was significantly greater than that of adding coral sand. This study demonstrated that when composting on a tropical island, adding coral sand under forced ventilation was a viable solution for realizing sustainable development.
The effect of steam explosion pretreatment conditions, such as steam explosion pressure, maintained pressure time, and bagasse water content, on bagasse specific surface area were investigated through single-factor experiments. After determining the optimal pretreatment conditions, bagasse graft acrylamide was prepared by grafting polymerization reaction of the acrylamide monomer onto the pretreated bagasse. The effects of surface area on the grafting degree were analyzed. Results showed that the grafting degree increased with increasing specific surface area. The optimized steam explosion pretreatment conditions were as follows: steam explosion pressure, 2.0 MPa; pressure maintaining time, 60 s; and bagasse water content, 25%.