A clear air turbulence (CAT) detection method using a 532 nm visible light airborne laser radar (LiDAR) system is proposed to address the urgent challenge in the aviation safety field. This method is based on the indirect detection technique of atmospheric molecular density for CAT and utilizes the strong aerosol scattering absorption characteristics of the iodine molecular 1109 absorption line to eliminate the interference of aerosol scattering and extinction on the weak molecular backscattering signal caused by CAT. This enables CAT detection under conditions where traditional ultraviolet LiDAR systems fail to function properly due to aerosol presence. The influence of axial wind speed and atmospheric temperature variations on the molecular backscattering spectrum in the aircraft flight path is studied, and a formula for vertical wind speed inversion in the CAT field is derived. The 532 nm airborne LiDAR CAT detection theoretical model and system architecture are presented. Through simulation analysis, the CAT detection range of the visible light LiDAR system is evaluated under different aircraft cruising altitudes and turbulence intensities. The results indicate that, with the proposed LiDAR system, the aerosol scattering influence can be effectively suppressed, and CAT can be detected up to 7 km for light-to-moderate turbulence and 10 km for moderate turbulence ahead of the aircraft when traditional ultraviolet LiDAR systems fail as the backscattering coefficient ratio between aerosol and molecule reaches the 10−1 condition. Based on this finding, a suggestion is made to construct a dual-wavelength (ultraviolet-visible) LiDAR system for CAT detection, aiming to solve the full coverage problem of CAT detection under various aerosol conditions. This study has a reference value for promoting the early resolution of CAT detection in the aviation field.
We comprehensively investigated the influence of laser wavelength on the detection distance at different clear air turbulence (CAT) intensities, distance resolutions, and Brunt–Väisälä frequency theoretically. It is found that there exists the optimal wavelength for maximal detection distance. When the distance resolution is fixed, the detection distance of 532 nm LiDAR is further compared with the 355 and 1064 nm counterparts and is more suitable under moderate to severe CAT. Our findings break the traditional cognition that “ultraviolet wavelength LiDAR is the most suitable for CAT detection” and may promote the remote detection research of CAT.
Sheared-beam imaging (SBI) is an effective way of imaging through turbulent medium, such as atmosphere or scattering liquid. Traditionally, the imaging is based on the laser transmitter array consisting of three beams or five beams for coherent illumination to the remote object. Compared with the existing SBI methods, the four-beam sparse sampling imaging method has been proposed, which may have more advantages; it not only sparses the detector elements but also reduces the number of emitted beams. However, the traditional phase retrieval algorithms are not suitable for the four-beam sparse sampling imaging. We propose a four-beam sparse phase retrieval (F-BSPR) algorithm, which uses the phase differences from both horizontal and vertical components and the phase differences from other components when the phase is retrieving. The proposed phase retrieval algorithm can better connect the phase difference and improve the accuracy of the phase retrieval. Furthermore, the imaging quality is improved. Simulation and experimental results show that the proposed algorithm is effective and feasible when the number of detector elements is sparse by 50%. Compared to the traditional four-beam phase retrieval method, the proposed F-BSPR method has better imaging quality and robustness.