Introduction: Neuromyelitis optica spectrum disorders (NMOSD), mainly mediated by B cells and AQP4 antibody, has a high rate of recurrence. Telitacicept is a novel drug specifically targeting the upstream signaling for the activation of B cell with its following production of autoimmune antibodies. Thus, it may be a promising approach. Our study preliminarily explored the potential safety and effectiveness of Telitacicept following plasma exchange in the treatment of recurrent NMOSD.Methods: This was a single‐center, single‐arm, open‐label study enrolling eight patients with recurrent NMOSD in China. All patients received plasma exchange three times, followed by Telitacicept 240 mg every week for 46 times. The primary endpoint was the time of first recurrence after enrollment. Secondary end points included: changes in Expanded Disability Status Scale score, Optic Spinal Impairment Scale score, Hauser Ambulation Index, number of lesions on MRI, retinal nerve fiber layer thickness measured by optical coherence tomography, latency and amplitude of visual evoked potential, titer of AQP4 antibody, and immune parameters of blood. Safety was also assessed. The study was registered with Chictr.org.cn (ChiCTR1800019427).Results: Eight eligible patients were enrolled. Relapse occurred in two patients (25%) and five patients (63%) remained relapse free after 48 weeks of treatment. The time to first recurrence was prolonged and the number of recurrences was reduced (p < 0.001, power of test = 1). One patient withdrew from the study due to low neutrophil count. No serious adverse events occurred.Conclusions: In this small, uncontrolled study, Telitacicept following plasma exchange has the potential to be a safe treatment for patients with recurrent NMOSD. It may prolong the recurrence interval and reduces the annual count of recurrences. A multicenter randomized controlled study with a larger sample is thus feasible and needed to further assess its safety and efficacy.
A platinum-platinum/rhodium thick-film thermocouple sensor based on an alumina curved-surface ceramic substrate was designed. The thermoelectric components were prepared by screen printing, which is simple, rapid, and low cost; additionally, screen-printed films have uniform thickness. We investigated the as-fabricated morphologies of Pt and Pt/Rh films using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that the thermocouple film prepared via this process was reasonably stable at high temperatures. We then repeated the test at 1300 °C and then at 1500 °C for 10 h to determine its thermal limits. After testing at 30-1300 °C thrice, the fabricated thermocouple showed excellent consistency and reusability, with a maximum output voltage of 11.733 mV and a Seebeck coefficient of 9.110 μV/ ° C. Upon testing the thermocouple at 1500 °C for 10 hours, the peak voltage output was 12.821 mV. Therefore, we concluded that the sensor could be used for temperature monitoring in hostile environments such as measurement of turbine blade surface temperature for aeroengines.
High-temperature thin-film strain gauges (HTFSGs) hold significant potential for monitoring extreme environments in fields such as aerospace, nuclear energy, and automotive engineering. With advances in materials science, HTFSGs based on ceramics, metals, and composite materials have progressively achieved high-precision strain measurements in high-temperature environments. In recent years, substantial progress has been made in areas such as material selection, sensor structural optimization, high-temperature oxidation resistance, and testing methodologies, which have enhanced the stability, sensitivity, and durability of HTFSGs under extreme conditions. This article reviews the developmental trajectory of HTFSGs research, focusing on the strain mechanisms of sensitive materials and recent advancements in ceramic-metal thin films, ceramic-semiconductor thin films, and metal-based thin films for HTFSGs in terms of structural design, thin-film deposition processes, and material properties. Additionally, current challenges and future research directions are discussed to provide valuable insights for future studies.
We designed a temperature sensing smart skin with a composite insulation layer for high-temperature monitoring of pipelines and engine combustion chamber walls, and proposed a thin/thick film hybrid integrated manufacturing process to improve the high temperature stability of the sensor. A PtRh/Pt thick-film thermocouple was installed on an ultra-thin nickel-based alloy substrate by screen printing and then fixed on a pipe inner wall by spot welding. The morphology of the prepared composite insulation layer was studied by scanning electron microscopy, and its insulation resistance was tested at high temperatures, verifying its high insulation performance. In addition, the output voltage has high linearity in the temperature range of 25–1000 °C, and the prepared thermocouple shows consistency and reusability with an average Seebeck coefficient of 9.016 V/°C. Upon testing the thermocouple at 1100 °C for 10 hours, the peak voltage output was 10.094 mV and the average output voltage was 10.051 mV. Experiments show that the thick-film thermocouple operates stably at high temperatures and can work at 1400°C in a short time.