The degradation rates of formic acid and lactic acid in the presence and absence of H2O2 were studied, utilizing several TiO2 catalysts: PC105 (100% anatase), MPT 625 (100% rutile), and P25 (80% anatase/20% rutile), and the results were discussed with regards to the current literature. The impact of hydrogen peroxide on the photocatalytic efficiency of eleven TiO2 samples was then determined, using commercial anatase structures (PC105, PC500, UV100), commercial mixed anatase/rutile (P25 and P90), and six rutile (two commercial samples: MPT 625 and C-R160, and four home-made rutile samples were synthesized by TiCl4 hydrolysis). The effect of catalyst surface area and TiO2 phase on the degradation rate of lactic acid (LA) and the decomposition of H2O2 was studied and discussed in regard to the active species generated. The intermediate products formed in the absence and presence of H2O2 were also an important factor in the comparison. Finally, the efficiency of the degradation of LA and formic acid (FA) in the presence of rutile and H2O2 was determined under visible light, and their reactivity was compared. The intermediate products formed in the degradation of LA were identified and quantified and compared to those obtained under UV (Ultra-Violet).
This study focuses on the preparation of innovative nanocomposite materials based on surface modification of commercial nano-ZrO2 optimized from Brønsted acid–base surface reactions. This surface modification was carried out by direct grafting of suitable phosphonic acids bearing a vinylic or phenylic substituent in aqueous solution. Different loading quantities of the anchoring organophosphorus compounds were applied for each materials synthesis. The resulting nanohybrids were thoroughly characterized by infrared spectroscopy (DRIFT), solid-state nuclear magnetic resonance (NMR), nitrogen adsorption-desorption (BET), thermogravimetric analysis (TG), and X-ray photoelectron spectroscopy (XPS), demonstrating the reliability and efficient tunability of the surface functionalization based on the starting Zr/P ratio. Our nanocomposite materials exhibited a high specific surface area as well as complex porosity networks with well-defined meso-pore. The as-prepared materials were investigated for the adsorption of a mixture of 16 polycyclic aromatic hydrocarbons (PAHs) at 200 ng·mL−1 in an aqueous solution. Adsorption kinetics experiments of each individual material were carried out on the prepared PAHs standard solution for a contact time of up to 6 h. Pretreatments of the adsorption test samples were performed by solid-phase extraction (SPE), and the resulting samples were analyzed using an ultrasensitive GC-orbitrap-MS system. The pseudo-first-order and the pseudo-second-order models were used to determine the kinetic data. The adsorption kinetics were best described and fitted by the pseudo-second-order kinetic model. The correlation between the nature of the substituent (vinylic or phenylic) and the parameters characterizing the adsorption process were found. In addition, an increase of PAHs adsorption rates with phosphonic acid loading was observed.
Efficient and selective extractions of precious and critical metal ions such as Au(III) and Pd(II) were investigated using zirconia nanoparticles surface modified with different organic mono- and di-carbamoyl phosphonic acid ligands. The modification is made on the surface of commercial ZrO2 that is dispersed in aqueous suspension and was achieved by optimizing the Bronsted acid–base reaction in ethanol/H2O solution (1:2), resulting in inorganic–organic systems of ZrO2-Ln (Ln: organic carbamoyl phosphonic acid ligand). The presence, binding, amount, and stability of the organic ligand on the surface of zirconia nanoparticles were confirmed by different characterizations such as TGA, BET, ATR-FTIR, and 31P-NMR. Characterizations showed that all the prepared modified zirconia had a similar specific surface area (50 m2.g−1) and the same amount of ligand on the zirconia surface in a 1:50 molar ratio. ATR-FTIR and 31P-NMR data were used to elucidate the most favorable binding mode. Batch adsorption results showed that (i) ZrO2 surface modified with di-carbamoyl phosphonic acid ligands had the highest adsorption efficiency to extract metals than mono-carbamoyl ligands, and (ii) higher hydrophobicity of the ligand led to better adsorption efficiency. The surface-modified ZrO2 with di-N,N-butyl carbamoyl pentyl phosphonic acid ligand (ZrO2-L6) showed promising stability, efficiency, and reusability in industrial applications for selective gold recovery. In terms of thermodynamic and kinetic adsorption data, ZrO2-L6 fits the Langmuir adsorption model and pseudo-second-order kinetic model for the adsorption of Au(III) with maximum experimental adsorption capacity qmax = 6.4 mg.g−1.