Accurate forest biomass estimation serves as the foundation of forest management and holds critical significance for a comprehensive understanding of forest carbon storage and balance. This study aimed to integrate Landsat 8 OLI and Sentinel-1A SAR satellite image data and selected a portion of the Shanxia Experimental Forest in Jiangxi Province as the study area to establish a biomass estimation model by screening influencing factors. Firstly, we extracted spectral information, vegetation indices, principal component features, and texture features within 3 × 3-pixel neighborhoods from Landsat 8 OLI. Moreover, we incorporated Sentinel-1’s VV (vertical transmit–vertical receive) and VH (vertical transmit–horizontal receive) polarizations. We proposed an ensemble AGB (aboveground biomass) model based on a neural network. In addition to the neural network model, namely the tent mapping atom search optimized BP neural network (Tent_ASO_BP) model, partial least squares regression (PLSR), support vector machine (SVR), and random forest (RF) regression prediction techniques were also employed to establish the relationship between multisource remote sensing data and forest biomass. Optical variables (Landsat 8 OLI), SAR variables (Sentinel-1A), and their combinations were input into the four prediction models. The results indicate that Tent_ ASO_ BP model can better estimate forest biomass. Compared to pure optical or single microwave data, the Tent_ASO_BP model with the optimal combination of optical and microwave input features achieved the highest accuracy. Its R² was 0.74, root mean square error (RMSE) was 11.54 Mg/ha, and mean absolute error (MAE) was 9.06 Mg/ha. Following this, the RF model (R² = 0.54, RMSE = 21.33 Mg/ha, MAE = 17.35 Mg/ha), SVR (R² = 0.52, RMSE = 17.66 Mg/ha, MAE = 15.11 Mg/ha), and PLSR (R² = 0.50, RMSE = 16.52 Mg/ha, MAE = 12.15 Mg/ha) models were employed. In conclusion, the BP neural network model improved by tent mapping atom search optimization algorithm significantly enhanced the accuracy of AGB estimation in biomass studies. This will provide a new avenue for large-scale forest resource surveys.

Achieving the accurate and efficient monitoring of forests at the tree level can provide detailed information for precise and scientific forest management. However, the detection of individual trees under planted forests characterized by dense distribution, serious overlap, and complicated background information is still a challenge. A new deep learning network, YOLO-DCAM, has been developed to effectively promote individual tree detection amidst complex scenes. The YOLO-DCAM is constructed by leveraging the YOLOv5 network as the basis and further enhancing the network’s capability of extracting features by reasonably incorporating deformable convolutional layers into the backbone. Additionally, an efficient multi-scale attention module is integrated into the neck to enable the network to prioritize the tree crown features and reduce the interference of background information. The combination of these two modules can greatly enhance detection performance. The YOLO-DCAM achieved an impressive performance for the detection of Chinese fir instances within a comprehensive dataset comprising 978 images across four typical planted forest scenes, with model evaluation metrics of precision (96.1%), recall (93.0%), F1-score (94.5%), and AP@0.5 (97.3%), respectively. The comparative test showed that YOLO-DCAM has a good balance between model accuracy and efficiency compared with YOLOv5 and advanced detection models. Specifically, the precision increased by 2.6%, recall increased by 1.6%, F1-score increased by 2.1%, and AP@0.5 increased by 1.4% compared to YOLOv5. Across three supplementary plots, YOLO-DCAM consistently demonstrates strong robustness. These results illustrate the effectiveness of YOLO-DCAM for detecting individual trees in complex plantation environments. This study can serve as a reference for utilizing UAV-based RGB imagery to precisely detect individual trees, offering valuable implications for forest practical applications.

Diameter at breast height (DBH) is a critical metric for quantifying forest resources, and obtaining accurate, efficient measurements of DBH is crucial for effective forest management and inventory. A backpack LiDAR system (BLS) can provide high-resolution representations of forest trunk structures, making it a promising tool for DBH measurement. However, in practical applications, deep learning-based tree trunk detection and DBH estimation using BLS still faces numerous challenges, such as complex forest BLS data, low proportions of target point clouds leading to imbalanced class segmentation accuracy in deep learning models, and low fitting accuracy and robustness of trunk point cloud DBH methods. To address these issues, this study proposed a novel framework for BLS stratified-coupled tree trunk detection and DBH estimation in forests (BSTDF). This framework employed a stratified coupling approach to create a tree trunk detection deep learning dataset, introduced a weighted cross-entropy focal-loss function module (WCF) and a cosine annealing cyclic learning strategy (CACL) to enhance the WCF-CACL-RandLA-Net model for extracting trunk point clouds, and applied a (least squares adaptive random sample consensus) LSA-RANSAC cylindrical fitting method for DBH estimation. The findings reveal that the dataset based on the stratified-coupled approach effectively reduces the amount of data for deep learning tree trunk detection. To compare the accuracy of BSTDF, synchronous control experiments were conducted using the RandLA-Net model and the RANSAC algorithm. To benchmark the accuracy of BSTDF, we conducted synchronized control experiments utilizing a variety of mainstream tree trunk detection models and DBH fitting methodologies. Especially when juxtaposed with the RandLA-Net model, the WCF-CACL-RandLA-Net model employed by BSTDF demonstrated a 6% increase in trunk segmentation accuracy and a 3% improvement in the F₁ score with the same training sample volume. This effectively mitigated class imbalance issues encountered during the segmentation process. Simultaneously, when compared to RANSAC, the LSA-RANCAC method adopted by BSTDF reduced the RMSE by 1.08 cm and boosted R² by 14%, effectively tackling the inadequacies of RANSAC’s filling. The optimal acquisition distance for BLS data is 20 m, at which BSTDF’s overall tree trunk detection rate (ER) reaches 90.03%, with DBH estimation precision indicating an RMSE of 4.41 cm and R² of 0.87. This study demonstrated the effectiveness of BSTDF in forest DBH estimation, offering a more efficient solution for forest resource monitoring and quantification, and possessing immense potential to replace field forest measurements.

Ormosia hosiei is a tree species native to China that has been extensively used for ornamental and furniture purposes due to its valued timber. The mating system has substantial impact on genetic diversity and structure of plant natural population. Such information should be considered when planning tree planting for forest restoration. Here we used 12 microsatellite markers and described the mating system of single families and the population genetic diversity of O. hosiei. A high level of genetic diversity was observed in both adults and progenies, although slight differences existed among populations and their progenies, with the expected heterozygosity ranging from 0.763 to 0.794. Overall, O. hosiei displayed a predominantly outcrossed mating. The estimate of multi-locus outcrossing rate (tm) was high with low variations among families, ranged from 0.997 to 1.000. The value of tm-ts, ranged from 0.000 to 0.139, indicated that biparental inbreeding occurred in progenies. Therefore, to obtain a reasonable genetic representation of native tree species and prevent problems associated with inbreeding depression, we suggested effective in situ conservation by replanting seedlings, but seedling production for restoration purposes may require a much larger sampling effort than is currently used. Moreover, it is necessary to conduct further multiple population and multi-year experiments to verify our conclusions.

Attention to habitat dynamics in subtropical mid-mountain forest plant communities containing endangered vegetation is critical for understanding the responses of ecosystems to global climate change and for their effective conservation. This study examines the species composition, structure, and interspecies competition within endemic and endangered Abies ziyuanensis (Abies ziyuanensis L.K.Fu and S.L.Mo) communities in China, comparing undisturbed and anthropogenically disturbed conditions. The survey recorded a total of 71 plant species across 39 families and 60 genera. PERMANOVA analysis highlighted significant disparities in species composition between the two forest community conditions. Communities impacted by anthropogenic disturbances showed a higher diversity of shrub and herbaceous species compared to those that were undisturbed, coupled with a significant increase in the number of Abies ziyuanensis seedlings, suggesting a greater potential for self-renewal. Nonetheless, the distribution of diameter class structures in these two community conditions indicates a declining trend in population numbers. In undisturbed Abies ziyuanensis communities, the Weighted Hegyi Competition Index (WCI) for Abies ziyuanensis was 6.04, below the average WCI of 12.24 for all trees within these communities. In contrast, within communities affected by anthropogenic disturbances, the WCI for Abies ziyuanensis reached 7.76, higher than the average WCI of 7.43 for all trees, indicating that Abies ziyuanensis in disturbed communities face heightened competitive pressure compared to undisturbed settings. These findings underscore that previous anthropogenic disturbances have altered the community composition, competition dynamics, growth environment, and succession trends of Abies ziyuanensis communities. While these disturbances promote the regeneration of Abies ziyuanensis, they also reduce its current dominance as a target species.

Currently, 3D tree modeling in a highly heterogeneous forest environment remains a significant challenge for the modeler. Previous research has only focused on morphological characteristics and parameters, overlooking the impact of micro-environmental factors (e.g., spatial-structural diversification and habitat heterogeneity) and providing less structural information about the individual tree and decreasing the applicability and authenticity of 3D tree models in a virtual forest. In this paper, we chose a mixed-forest conversion of Chinese fir (Cunninghamia lanceolata) plantations in a subtropical region of China as our study subject and proposed a novel 3D tree-modeling method based on a structural unit (TMSU). Our approach modified traditional rule-based tree modeling (RTM) by introducing a nonlinear mixed-effect model (NLME) to study the coupling response between the spatial structures and morphological characteristics (e.g., tree height (H), height-to-crown base (H_CB), and crown width (CW)) of three dominant trees (e.g., Cunninghamia lanceolata (SM), Machilus pauhoi (BHN), and Schima superba (MH)) and develop a prediction model of the morphological characteristic by incorporating forest-based structural parameters. The results showed that: (1) The NLME model in TMSU was found to better fit the data and predict the morphological characteristics than the OLS model in RTM. As compared to the RTM morphological model, the prediction accuracy of the TMSU model of morphological features was improved by 10.4%, 3.02%, and 17.8%, for SM’s H, H_CB, and CW, respectively; 6.5%, 7.6%, and 8.9% for BHN’s H, H_CB, and CW, respectively; and 13.3%, 15.7%, and 13.4% for MH’s H, H_CB, and CW, respectively. (2) The spatial-structural parameters of crowding ($C_i$), mingling ($M_i$), and dominance ($U_i$) had a significant impact on the morphological characteristics of SM, BHN, and MH in TMSU. The degree of crowding, for example, had a positive relationship with tree height, height-to-crown base, and crown width in SM, BHN, and MH; under the same crowding conditions, mingling was positively correlated with tree crown width in SM, and dominance was positively correlated with tree height but negatively correlated with height-to-crown base in BHN; under the same crowding and mingling, dominance was positively correlated with height-to-crown base in MH. (3) Using 25 scenes based on the value class of $C_i,M_i$ for SM, 25 scenes based on the value class of $C_i,U_i$ for BHN, and 125 scenes based on the value class of $C_i,M_i,U_i$ for MH, we generated the model libraries for the three dominating species based on TMSU. As a result, our TSMU method outperformed the traditional 3D tree-modeling method RTM in a complex and highly heterogeneous spatial structure of a forest stand, and it provided more information concerning the spatial structure based on the neighborhood relationships than the simple morphological characteristics; a higher morphological prediction accuracy with fewer parameters; and the relationship between the spatial-structural parameters and the morphological characteristics of a reference tree.