The outer rotor coreless bearingless permanent magnet synchronous motor (ORCBPMSM) is suitable for flywheel energy storage systems because of the advantages of no core loss and high efficiency. To improve the output torque and suspension forces of the motor, a Taguchi-response surface method (T-RSM) is proposed to conduct multiobjective optimization design of the motor. First, the basic structure and working principle of the proposed motor are expounded, and the basic design parameters of the motor are given. Then, the orthogonal matrix is established according to the number of factor levels, and the finite element analyze (FEA) is conducted to obtain each set of test results. After that, the sensitivity analysis is conducted and the best combination of variables can be achieved. Aiming at improving the accuracy of the Taguchi method, the fitting functions are established among the targets and conflicting variables, and the optimal solution is obtained by RSM. Finally, the optimal motor is manufactured, and the performance of the motor is verified. The experimental results show that stable operation can be obtained and the operating performance of the proposed motor is improved after optimization.
2 December 2021 in IEEE Transactions on Industrial Electronics
In the decoupling control process of the outer rotor coreless bearingless permanent magnet synchronous motor using least square support vector machine, the kernel width 2 and penalty factor of the least square support vector machine are difficult to tune, resulting in high kernel space complexity and low fitting accuracy. A new improved genetic algorithm is used to optimize the above parameters. Firstly, the generalized inverse system model of the original nonlinear multiple input output system is fitted online with the optimized least square support vector machine, and the generalized inverse system model is connected in series with the original system to form a pseudo-linear system. And then a linear closed-loop controller is used for control. Simulations and experiments show that the robustness and wide applicability of the original system are guaranteed. The dynamic and static performance of the system are improved, verifying the effectiveness of the scheme.
10 January 2022 in IEEE Transactions on Power Electronics
In order to solve the problem of rotor vibration for the bearingless permanent magnet synchronous motor, a vibration compensation control method based on adaptive neural network band-pass filter (ANNBPF) is proposed. First, the mechanism of rotor vibration is obtained by theoretical analysis. Second, the ANNBPF is used to extract the components related to the frequency of the unbalanced vibration and the dead-time (DT) vibration to realize the vibration compensation control. Additionally, the DT effect is compensated by detecting the current polarity to improve the compensation effect. Finally, a vibration compensation control system based on ANNBPF and current polarity detection is constructed.
In order to solve the problem of poor control performance, caused by fixed parameters of the active disturbance rejection control (ADRC) in bearingless permanent magnet synchronous motors (BPMSM), a dynamic parameters adjustment method of ADRC, based on a genetic algorithm and back-propagation neural network (GA-BPNN), is proposed. Firstly, the ADRC control models of motor-side and suspension-side are established, according to the motor speed formula and suspension force formula. Secondly, the BPNN algorithm is used to dynamically adjust the parameters of the ADRC, and the operation processes of BPNN are deduced, according to the chain rule. Thirdly, in order to avoid the problem of getting out of control, caused by the convergence failure of BPNN, a GA based on floating point coding is used to optimize the initial value of BPNN. Finally, these methods are integrated to form a BPMSM control system, based on the GA-BPNN-ADRC, and the effectiveness is verified on an experimental platform. The experimental results, show that the proposed method reduces the failure probability of the system from 35.61% to 0%, and the anti-interference ability and dynamic performance of the speed and displacement of the control system are significantly improved.
8 March 2023 in IEEE Transactions on Transportation Electrification
The outer rotor coreless bearingless permanent magnet synchronous generator is a complex system with multi-variable, nonlinear and strong coupling. So the dynamic decoupling of generation voltage and suspension force is the key to realize stable power generation and reliable operation. In this paper, a decoupling control method based on fuzzy neural network inverse system is proposed. Firstly, the basic structure and working principle of the outer rotor coreless bearingless permanent magnet synchronous generator is introduced in this paper and the mathematical model of the generating voltage and suspension force is established. Then, based on the reversibility analysis of the mathematical model, the inverse system is constructed by using fuzzy neural network. By connecting the inverse system in series with the original system, the original nonlinear system is decoupled into three single-input and single-output linear subsystems. Finally, the designed control system is simulated and experimentally studied. The simulation and experimental results show that this control method can realize decoupling among generation voltage and suspension forces, and the outer rotor coreless bearingless permanent magnet synchronous generator has good dynamic performance and stability.
Magnetic bearings have a series of excellent qualities, such as no friction and abrasions, high speed, high accuracy, and so on, which have fundamentally innovated traditional forms of support. In order to solve the problems of the large volume, low power density and high coupling coefficient of three-pole magnetic bearings, a six-pole AC active magnetic bearing is designed. Firstly, the basic structure and working principle of a two-degree-of-freedom (2-DOF) six-pole active magnetic bearing is introduced. Secondly, a suspension force modeling method of a 2-DOF AC active magnetic bearing based on the Maxwell tensor method is proposed, and the mathematical model of active magnetic bearing is established. Considering the fact that AC active magnetic bearing is essentially a nonlinear system, a fuzzy active disturbance rejection control (ADRC) method is designed based on fuzzy control and ADRC theory. Its control algorithm and control block diagram are given, and the fuzzy ADRC method is simulated and verified. Finally, the control block diagram of an experimental system based on the 2-DOF six-pole active magnetic bearing is given, and the experimental platform is constructed. The experimental results show that the mechanical and magnetic circuit structure of the 2-DOF six-pole active magnetic bearing is reasonable, and the fuzzy controllers can realize the stable suspension of the rotor.