Lithium-ion power batteries are widely used in the electric vehicle (EV) industry due to their high working voltage, high energy density, long cycle life, low self-discharge rate, and environmental protection. A multi-algorithm fusion method is proposed in this paper to estimate the battery state of charge (SOC), establishing the Thevenin model and collecting the terminal voltage residuals when the extended Kalman filter (EKF), adaptive extended Kalman filter (AEKF), and H infinite filter (HIF) estimate the SOC separately. The residuals are fused by Bayesian probability and the weight is obtained, and then the SOC estimated value of the fusion algorithm is obtained from the weight. A comparative analysis of the estimation accuracy of a single algorithm and a fusion algorithm under two different working conditions is made. Experimental results show that the fusion algorithm is more robust in the whole process of SOC estimation, and its estimation accuracy is better than the EKF algorithm. The estimation result for the fusion algorithm under a Dynamic Stress Test (DST) is better than that under a Hybrid Pulse Power Characterization (HPPC) test. With the emergence of cloud batteries, the fusion algorithm is expected to realize real vehicle online application.
In this paper, the unbalanced discharge of lithium-ion battery module caused by heat dissipation is studied. The battery pack is composed of 12 batteries, which are divided into four modules in series, and three batteries in each module are in parallel. The three-dimensional electrochemical-thermal model of a single battery and a battery pack is established by the polynomial approximation pseudo-two-dimensional (PP2D) method in ANSYS fluent 16.0, and the correctness of the model is verified by simulation and experiment. On this basis, the non-uniform temperature distribution and the coupling relationship between electrical parameters and electrochemical parameters in the battery pack under inhomogeneous heat dissipation were studied. The mechanism of how the temperature difference affects the distribution of current and state of charge (SOC) is also given. According to the research results, the control of the average temperature of the battery pack and the control of temperature difference are incompatible and need to be traded off. Enhanced cooling can reduce the average temperature, but it produces a large temperature gradient, resulting in a greater internal temperature difference of the battery pack. The large temperature difference enlarges the difference of the branch current and aggravates the unevenness of SOC in the battery pack. In addition, the temperature difference most suitable for SOC uniformity is not the traditional 5 °C but increases with the increase of the ambient temperature and the cooling medium temperature.