In this work, the possibility of preparation of copolymers of three-dimensional crosslinked structure based on polypropylene glycol fumarate and acrylic acid is shown. The initial reagent polypropylene glycol fumarate has been synthesized by polycondensation reaction of fumaric acid and propylene glycol. The curing process of polypropylene glycol fumarate and acrylic acid at various mole concentrations was studied using DSC method at isothermal and dynamic regimens. Curing in isothermal condition was carried out at temperatures of 60 °C, 70 °C, and 80 °C. Residual reactivity was evaluated at a dynamic regimen within the temperature range from 30 °C to 200 °C at a constant heating rate. On the basis of calorimetric studies, the thermal effects and kinetic parameters of the reaction (conversion, reaction rate, activation energy) have been determined. Thermal behavior of cured samples of p-PGF-AA was estimated using dynamic thermogravimetry (TGA). According to TGA data, the process of decomposition of the studied copolymers proceeds in several stages. Based on the results obtained, the activation energies of thermal decomposition were calculated using the iso-conversional methods of Kissinger–Akakhira–Sunose and Friedman.
The rheological behavior and low-temperature curing kinetics of poly(ethylene glycol fumarate)–acrylic acid systems initiated by benzoyl peroxide/N,N-dimethylaniline have been investigated for the first time with a focus on the development of thermosetting binders with controllable properties. It has been established that both composition and temperature have a significant effect on rheological behavior and kinetic parameters. Rheological studies revealed non-Newtonian flow behavior and thixotropic properties, while oscillatory tests demonstrated structural transformations during curing. Increasing the temperature was found to accelerate gelation, whereas a higher polyester content retarded the process, which is crucial for controlling the pot life of the reactive mixture. DSC analysis indicated that isothermal curing at 30–40 °C can be satisfactorily described by the Kamal autocatalytic model, whereas at 20 °C, at later stages, and at higher polyester contents, diffusion control becomes significant. The thermal behavior of cured systems was investigated using thermogravimetry. Calculations using the isoconversional Kissinger–Akahira–Sunose and Friedman methods confirmed an increase in the apparent activation energy for thermal decomposition, suggesting a stabilizing effect of poly(ethylene glycol fumarate) in the polymer structure. The studied systems are characterized by controllable kinetics, tunable viscosity, and high thermal stability, making them promising thermosetting binders for applications in composites, construction, paints and coatings, and adhesives.
29 July 2026 in Bulletin of Shakarim University. Technical Sciences
The investigation of the influence of UV irradiation on polymers represents an important and relevant area of science and technology, as it enables the development of new approaches for designing more durable and efficient materials. This work examines the changes occurring in polymers based on unsaturated polyesters under prolonged exposure to ultraviolet radiation. The objective of the study was to evaluate the effect of long-term UV irradiation on the thermal stability of polymeric materials based on polyethylene glycol maleate and polypropylene glycol maleate copolymerized with acrylic acid at a component ratio of approximately 70:30 wt.%. The samples were examined using microscopy to identify microcracks formed as a result of UV exposure. In addition, visual assessment of color variation and the appearance of turbidity in the studied materials was performed. Additionally, the carbonyl index was determined to quantitatively evaluate the degree of photooxidative degradation of the polymers. This parameter characterizes the accumulation of carbonyl groups formed as a result of polymer chain scission under UV irradiation and allows estimation of the extent of photodegradation processes in the materials. The obtained results demonstrate that the polymer synthesized on the basis of polyethylene glycol maleate exhibited a more pronounced decrease in the onset temperature of thermal deformation after UV exposure compared with the copolymer based on polypropylene glycol maleate, indicating higher resistance of the latter to UV-induced degradation. The thermal stability of the copolymers was evaluated by thermogravimetric analysis through determination of the onset temperature of thermal deformation before and after 21 days of UV irradiation.