Using nanoadditives in lubricants is one of the most effective ways to control friction and wear, which is of great significance for energy conservation, emission reduction, and environmental protection. With the scientific and technological development, great advances have been made in nanolubricant additives in the scientific research and industrial applications. This review summarizes the categories of nanolubricant additives and illustrates the tribological properties of these additives. Based on the component elements of nanomaterials, nanolubricant additives can be divided into three types: nanometal-based, nanocarbon-based, and nanocomposite-based additives. The dispersion stabilities of additives in lubricants are also discussed in the review systematically. Various affecting factors and effective dispersion methods have been investigated in detail. Moreover, the review summarizes the lubrication mechanisms of nanolubricant additives including tribofilm formation, micro-bearing effect, self-repair performance, and synergistic effect. In addition, the challenges and prospects of nanolubricant additives are proposed, which guides the design and synthesis of novel additives with significant lubrication and antiwear properties in the future.

It is well known that groove texture with a careful design can be used to enhance the load-carrying capacity of oil film under the conditions of hydrodynamic lubrication. In this study, a general parametric model was developed, and agenetic algorithm-sequential quadratic programming hybrid method was adopted to obtain the global-optimum profile of the groove texture. The optimized profiles at different rotating speeds are all chevrons. The numerical analysis results verified the effect of the optimization. In addition to the numerical optimization, experiments were conducted to validate the superiority of the optimized results.The experimental results show that the optimized groove texture can efficiently reduce the coefficient of friction (COF) and the temperature rise of the specimen. In particular, the optimized groove textures can achieve stable ultra-low COF values (COF < 0.01) under certain conditions.

In this study, the tribological behaviors of graphene as a lubricant additive for steel/copper and steel/steel friction pairs were compared. For the steel/copper friction pair, the graphene sheets remarkably decreased the coefficient of friction and wear scar depth under low loads, but these slightly increased under high loads. The steel/steel friction pair showed excellent tribological properties even under high loads. Severe plastic deformation on the copper surface reduced the stability of the graphene tribofilm because of a rough copper transfer film on the steel during the running-in period. The results provide a better understanding of the mechanism of graphene as a lubricant additive.

Rolling element bearings are very common components in rotating machinery. Hence, condition monitoring and the detection of defects are very important for the normal and safe running of these machines. Vibration based techniques are well established for the condition monitoring of rolling element bearings, although they are not so effective in detecting incipient defects in the bearing. Acoustic emission (AE) is receiving increasing attention as a complementary method for condition monitoring of bearings as AE is very sensitive to incipient defects. This paper presents an experimental study to investigate the AE characteristics of bearing defect and validates the relationship between various AE parameters and the operational condition of rolling element bearings. To analyze the characteristic vibration frequency of the bearing using the AE signal, short-time rms and autocorrelation functions are integrated to extract the actual characteristic frequency. The AE signal is then analyzed using standard parameters of the signals to explore the source characteristics and sensitivity of typical rolling element bearing faults. The results demonstrate that the proposed method is very effective to extract the actual characteristic frequency of the bearing by AE signal. Furthermore the AE parameters are always sensitive to the running and fault conditions, which have a strong influence on the strain and deformation within the bearing material.

Mildly thermal reduction of graphene oxide (MRGO) offers significant potential for combination between excellent lubrication ability and advantages of green, low-cost and simple synthesis operation.

Titanium alloy has the advantages of high specific strength, good corrosion resistance, and biocompatibility and is widely used in marine equipment, biomedicine, aerospace, and other fields. However, the application of titanium alloy in special working conditions shows some shortcomings, such as low hardness and poor wear resistance, which seriously affect the long life and safe and reliable service of the structural parts. Tribocorrosion has been one of the research hotspots in the field of tribology in recent years, and it is one of the essential factors affecting the application of passivated metal in corrosive environments. In this work, the characteristics of the marine and human environments and their critical tribological problems are analyzed, and the research connotation of tribocorrosion of titanium alloy is expounded. The research status of surface protection technology for titanium alloy in marine and biological environments is reviewed, and the development direction and trends in surface engineering of titanium alloy are prospected.