Christopher Bareither

Prof. Christopher Bareither


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2008 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
TETuncer B. Edil
Tuncer B. Edil
CBCraig H. Benson
Craig H. Benson
DMDavid M. Mickelson
David M. Mickelson
This study evaluated the effects of physical characteristics and geologic factors on the shear strength of compacted sands from Wisconsin that are used as granular backfill for mechanically stabilized earth walls and reinforced soil slopes. Physical properties and shear strength were determined for 30 compacted sands collected from a broad range of geological deposits. Relationships between strength/deformation behavior, geologic origin, and physical properties were used to categorize the sands into four friction angle groups. Sands with the lowest friction angle are derived from weathering of underlying sandstones, and tend to be medium-fine, well-rounded, and poorly graded sands. Sands with the highest friction angle are from recent glacial activity and tend to be coarser grained, well-graded, and/or angular sands. A multivariate regression model was developed that can be used to predict friction angle ( ϕ′ ) of compacted sands from comparable geological origins based on effective particle size ( D10 ) ...

1 October 2013 in Waste Management
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
GWGeorgia L. Wolfe
Georgia L. Wolfe
KMKatherine D. McMahon
Katherine D. McMahon
CBCraig H. Benson
Craig H. Benson

1 October 2012 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
CBCraig H Benson
Craig H Benson
TETuncer B. Edil
Tuncer B. Edil
The objective of this study was to evaluate the effects of waste composition and decomposition on the shear strength of municipal solid waste. Waste was collected from two sources (an operating landfill and a transfer station) and degraded in laboratory anaerobic reactors to prepare wastes with different degrees of decomposition. Shear strength was measured in a 280-mm-diameter direct shear ring on nine wastes with normal stress ranging between 12 and 90 kPa. The Mohr-Coulomb failure criterion was used to determine shear strength parameters (ϕ = friction angle and c = cohesion intercept) of the wastes, and shear strength was selected at a horizontal displacement of 56 mm (i.e., 20% of the specimen diameter). A composite failure envelope regressed through shear strength versus normal stress data from all wastes was statistically significant, with ϕ=37° and c=20 kPa. A comparison between tests conducted in this study and in the literature indicates that larger ϕ are obtained for waste with a greater...

1 September 2012 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
CBCraig H Benson
Craig H Benson
TETuncer B. Edil
Tuncer B. Edil
An evaluation of scale effects, stress, waste segregation, and waste decomposition on the immediate compression behavior of municipal solid waste is presented. Laboratory experiments were conducted in 64-, 100-, and 305-mm-diameter compression cells. A field-scale experiment [Deer Track Bioreactor Experiment (DTBE)] was conducted on waste of the same composition and material properties. A methodology is presented for determining the end-of-immediate compression strain (ɛEOI) that is applicable to both laboratory- and field-scale data. The compression ratio (Cc′) was comparable between tests conducted in 100- and 305-mm compression cells. Compression tests in 305-mm cells conducted on six wastes (three size-differentiated fresh wastes and three decomposed wastes) yielded Cc′ ranging from 0.22 to 0.28 in the stress range of 25–100 kPa. A similar Cc′ (0.23) was determined for the DTBE (20–67 kPa). The variation in Cc′ is related to the waste compressibility index (WCI), which is a function of waste d...

1 September 2008 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
CBCraig H. Benson
Craig H. Benson
TETuncer B. Edil
Tuncer B. Edil
Direct shear tests were conducted on 30 sand backfill materials having gravel contents ranging from 0% to 30% in a 64 mm square small-scale direct shear (SSDS) box and a 305 mm square large-scale direct shear (LSDS) box. The objectives were to compare the shearing behavior of a broad range of natural sand backfill materials tested in SSDS and LSDS and to determine if the same friction angle (φ′) is obtained in SSDS and LSDS when the natural backfill material contains gravel. Triaxial compression (TC) tests were also conducted on four of the backfill materials for comparison with the SSDS and LSDS tests. Specimens tested in SSDS and TC included only material passing the No. 4 sieve (P4). Test specimens in LSDS included the P4 material as well as material retained on the No. 4 sieve (R4), to a maximum particle diameter of 25.4 mm. Friction angles corresponding to peak strength (φ′) measured in SSDS and LSDS differed by no more than 4° for a given sand backfill, and in most cases were within 2°. The friction angles also were unaffected by removal of the R4 material. Repeatability tests showed that statistically similar failure envelopes (p-value = 0.98) are obtained in SSDS and LSDS, and that highly repeatable friction angles (φ′) are obtained using the SSDS (φ′ ± 0.25°) and the LSDS (φ′ ± 0.45°) methods. No statistically significant difference was found among the failure envelopes measured in SSDS, LSDS, and TC, suggesting that φ′ for clean sand backfill with less than 30% gravel can be measured with similar accuracy using any of the three test methods.

1 August 2010 in Journal of Environmental Engineering
Verified
Journal Article
Closed access
CBChristopher Bareither
Christopher Bareither
CBCraig H Benson
Craig H Benson
MBMorton A. Barlaz
Morton A. Barlaz
TETuncer B. Edil
Tuncer B. Edil
TTThabet M. Tolaymat
Thabet M. Tolaymat
An assessment of state-of-the-practice at five full-scale North American landfills operating as bioreactors is presented in this two-paper set. This paper focuses on effectiveness of liners and leachate collection systems, leachate generation rates, leachate recirculation practices and rates, effectiveness in moistening the waste, and settlement of the waste over time. Except in one case, the liner and leachate collection systems at the bioreactor landfills were similar to those used for landfills operated conventionally. Leachate generation rates increased approximately linearly with recirculation rate, but in all cases, the leachate generation rate was <300 L/m2 year . Leachate depths generally were maintained within regulatory requirements, even with the highest recirculation rates. Leakage rates from liners at bioreactor landfills, including alternative liner designs employing geosynthetic clay liners, are comparable to leakage rates from conventional landfills. Thus, based on the information gathered in this study, additional requirements or features for liners or leachate collection systems are not warranted for bioreactor landfills. Diminishing capacity of horizontal recirculation trenches is common. Experience at one landfill suggests that small doses at high frequency under substantial injection pressure can deter loss of trench capacity. Only those landfills that were aggressive in recirculation had achieved water contents near the field capacity. Increasing the amount of liquid that is added may be required to achieve field capacity at some landfills, particularly if a final cover is placed soon after waste grades are reached. The rate of time-dependent waste settlement attributed to biodegradation is about 1.6 times larger in bioreactor landfills than in conventional landfills, and increases as the recirculation dosage increases.