To achieve the best treatment of skin cancer, drug penetration inside the deepest layers of the skin is an important scientific interest. We designed an ethosome formulation that serves as a carrier for metformin and measured the in vitro skin permeation. We also aimed to measure the antitumor activity of the optimal ethosomal preparation when applied topically to chemically induced skin cancer in mice. We utilized a statistical Box–Behnken experimental design and applied three variables at three levels: lecithin concentration, cholesterol concentration and a mixture of ethanol and isopropyl alcohol concentrations. All formulations were prepared to calculate the entrapment efficiency %, zeta potential, size of the vesicles and drug release % after 1, 2, 4, 8 and 24 h. The size of the vesicles for the formulations was between 124 ± 14.2 nm and 560 ± 127 nm, while the entrapment efficiency was between 97.8 ± 0.23% and 99.4 ± 0.24%, and the drug release % after 8 h was between 38 ± 0.82% and 66 ± 0.52%. All formulations were introduced into the Box–Behnken software, which selected three formulations; then, one was assigned as an optimal formula. The in vivo antitumor activity of metformin-loaded ethosomal gel on skin cancer was greater than the antitumor activity of the gel preparation containing free metformin. Lower lecithin, high ethanol and isopropyl alcohol and moderate cholesterol contents improved the permeation rate. Overall, we can conclude that metformin-loaded ethosomes are a promising remedy for treating skin cancers, and more studies are warranted to approve this activity in other animal models of skin cancers.

This research aims to develop a drug delivery system that effectively treats colitis while administering curcumin/mesalamine by coating alginate/chitosan beads with Eudragit® S-100 to target the colon. Beads were tested to determine their physicochemical characteristics. Coating with Eudragit® S-100 prevents drug release at a pH of less than 7; this was demonstrated by in-vitro release conducted in a medium with gradually varying pH to mimic circumstances in various regions of the gastrointestinal tract. This study examined the efficacy of the coated beads in treating acetic acid-induced colitis in rats. Results showed that spherical beads were formed with an average diameter of 1.6–2.8 mm, and the obtained swelling ranged from 409.80% to 890.19%. The calculated entrapment efficiency ranged from 87.49% to 97.89%. The optimized formula F13 (which was composed of mesalamine-curcumin active ingredients, Sodium alginate as a gelling agent, chitosan as a controlled release agent, CaCl2 as a crosslinking agent, and Eudragit S-100 as a pH-sensitive coating agent) demonstrated the best entrapment efficiency (97.89% ± 1.66), swelling (890.19% ± 60.1), and bead size (2.7 ± 0.62 mm). In formulation #13, which was coated with Eudragit S 100, curcumin (6.01 ± 0.04%) and mesalamine (8.64 ± 0.7%), were released after 2 h at pH 1.2; 6.36 ± 0.11% and 10.45 ± 1.52% of curcumin and mesalamine, respectively, were then released after 4 h and at pH 6.8. Meanwhile, at pH 7.4, after 24 h, approximately 85.34 ± 2.3% (curcumin) and 91.5 ± 1.2% (mesalamine) were released. Formula #13 significantly reduced the colitis, and this suggests that the developed hydrogel beads can be used for delivering curcumin-mesalamine combinations to treat ulcerative colitis after adequate research.

Nanostructured lipid carriers (NLCs) have been proven to significantly improve the bioavailability and efficacy of many drugs; however, they still have many limitations. These limitations could hinder their potential for enhancing the bioavailability of poorly water-soluble drugs and, therefore, require further amendments. From this perspective, we have investigated how the chitosanization and PEGylation of NLCs affected their ability to function as a delivery system for apixaban (APX). These surface modifications could enhance the ability of NLCs to improve the bioavailability and pharmacodynamic activity of the loaded drug. In vitro and in vivo studies were carried out to examine APX-loaded NLCs, chitosan-modified NLCs, and PEGylated NLCs. The three nanoarchitectures displayed a Higuchi-diffusion release pattern in vitro, in addition to having their vesicular outline proven via electron microscopy. PEGylated and chitosanized NLCs retained good stability over 3 months, versus the nonPEGylated and nonchitosanized NLCs. Interestingly, APX-loaded chitosan-modified NLCs displayed better stability than the APX-loaded PEGylated NLCs, in terms of mean vesicle size after 90 days. On the other hand, the absorption profile of APX (AUC_0-inf) in rats pretreated with APX-loaded PEGylated NLCs (108.59 µg·mL⁻¹·h⁻¹) was significantly higher than the AUC_0-inf of APX in rats pretreated with APX-loaded chitosan-modified NLCs (93.397 µg·mL⁻¹·h⁻¹), and both were also significantly higher than AUC_0-inf of APX-Loaded NLCs (55.435 µg·mL⁻¹·h⁻¹). Chitosan-coated NLCs enhanced APX anticoagulant activity with increased prothrombin time and activated partial thromboplastin time by 1.6- and 1.55-folds, respectively, compared to unmodified NLCs, and by 1.23- and 1.37-folds, respectively, compared to PEGylated NLCs. The PEGylation and chitosanization of NLCs enhanced the bioavailability and anticoagulant activity of APX over the nonmodified NLCs; this highlighted the importance of both approaches.

Apixaban (Apx), an oral anticoagulant drug, is a direct factor Xa inhibitor for the prophylaxis against venous thromboembolism. Apx has limited oral bioavailability and poor water solubility. The goal of this study was to improve the formulation of an Apx-loaded nanostructured lipid carrier (NLC) to increase its bioavailability and effectiveness. As solid lipid, liquid lipid, hydrophilic, and lipophilic stabilizers, stearic acid, oleic acid, Tween 80, and lecithin were used, respectively. Utilizing Box–Behnken design, the effects of three factors on NLC particle size (Y₁), zeta potential (Y₂), and entrapment efficiency percent (Y₃) were examined and optimized. The optimized formula was prepared, characterized, morphologically studied, and pharmacokinetically and pharmacodynamically assessed. The observed responses of the optimized Apx formula were 315.2 nm, −43.4 mV, and 89.84% for Y₁, Y₂, and Y₃, respectively. Electron microscopy revealed the homogenous spherical shape of the NLC particles. The in vivo pharmacokinetic study conducted in male Wistar rats displayed an increase in AUC and C_max by 8 and 2.67 folds, respectively, compared to oral Apx suspension. Moreover, the half-life was increased by 1.94 folds, and clearance was diminished by about 8 folds, which makes the NLC formula a promising sustained release system. Interestingly, the pharmacodynamic results displayed the superior effect of the optimized formula over the drug suspension with prolongation in the cuticle bleeding time. Moreover, both prothrombin time and activated partial thromboplastin time are significantly increased. So, incorporating Apx in an NLC formula significantly enhanced its oral bioavailability and pharmacodynamic activity.

This study aimed to formulate a pharmaceutical dosage form containing omeprazole (OMP) and curcumin (CURC) to treat experimental peptic ulcers. OMP and CURC were preliminarily complexed with hydroxypropyl-β-cyclodextrin for enhancing their solubilization. After that, the combined complex (CURC/OMP) was loaded to alginate beads to sustain their release and then coated with chitosan. Finally, we tested the anti-ulcerogenic impact of the best formula versus free OMP or OMP-only-loaded beads. The formulated spherical beads’ diameter ranged from a minimum value of 1.5 ± 0.08 mm to 2.6 ± 0.24 mm; the swelling results ranged from 400.00 ± 8.5% to 800.00 ± 6.2%. The entrapment efficiency was in a range from 60.85 ± 1.01% to 87.44 ± 1.88%. The optimized formula (F8) showed a maximum EE% (87.44 ± 1.88%), swelling (800.00 ± 6.2%), and diameter in the range of 2.60 ± 0.24, with a desirability of 0.941. In the first hour following the administration of the free drug complex, 95% of OMP and 98% of CURC were released. This is unacceptable for medications that require a delayed release in the stomach. The initial drug release from hydrogel beads was 23.19% for CURC and 17.19% for OMP after 2 h and 73.09% for CURC and 58.26% for OMP after 12 h; however, after 24 h, 87.81% of CURC and 81.67% of OMP had been released. The OMP/CURC beads showed a more stable particle size (0.52 ± 0.01 mm) after 6 weeks. In conclusion, the OMP/CURC hydrogel beads give stronger anti-ulcer effectiveness compared to free OMP, CURC-only beads, and OMP-only-loaded beads, indicating a prospective application for managing peptic ulcers.

Background: Plecanatide, which is used to treat irritable bowel syndrome constipation (IBS-C), is highly susceptible to gastric enzymatic degradation, impairing critical therapeutic efficacy and bioavailability. This work designed an improved site-directing, colon-targeted mucoadhesive formulation to guarantee site-specific delivery and efficacy. Methods: Design-Expert software 13 was used in a systematic optimization system with different concentrations of Na-alginate, Carbopol 934, and Methocel K15M. Flowability and compressibility were evaluated by pre-compression analysis. To specifically target the distal colon, the in vitro dissolution kinetics and cellular activity against the HCT116 colorectal carcinoma cells were assessed. They were in vivo studies that measured mucosal recovery, submucosal pathology, and systemic oxidative stress biomarkers (MDA and SOD). In the accelerated stability testing, the standardized periods were tested under controlled laboratory conditions. Results: Methocel K15M proved to be the best polymer. The formulation exhibited 24 h sustained release, which fit best in the Hixson–Crowell (r = 0.980) and Higuchi (r = 0.956) models. Cellular activity against the HCT116 cells was high (IC50 = 79.31 ug/mL), being ten-fold better than the raw API. In vivo, the mucoadhesive system demonstrated almost total inflammatory resolution of all the layers of the colon. As opposed to regular tablets, it had a tremendous impact in reducing MDA (p = 0.014) and raising the activity of SOD (p = 0.002). Accelerated stability testing (40 °C/75% RH for 6 months) showed a slight decrease in drug content from 100.85% to 96.78%, which remained within the acceptable pharmacopeial limits (90–110%), confirming formulation stability. Conclusions: The mucoadhesive Plecanatide formulation is a “site-directing colon-targeted mucoadhesive formulation” that can effectively overcome the shortcomings of traditional therapy; i.e., it exhibits the potential for better compliance. This formulation mitigates inflammatory and oxidative stress, offering a stable, promising alternative for managing chronic IBS-C symptoms and enhancing patient health outcomes in contemporary clinical practice and pharmaceutical standards.