This paper presents a mixed-integer linear programming model for demand-responsive feeder transit services to assign vehicles located at different depots to pick up passengers at the demand points and transport them to the rail station. The proposed model features passengers’ one or several preferred time windows for boarding vehicles at the demand point and their expected ride time. Moreover, passenger satisfaction that was related only to expected ride time is fully accounted for in the model. The objective is to simultaneously minimize the operation costs of total mileage and maximize passenger satisfaction. As the problem is an extension of the nondeterministic polynomial problem with integration of the vehicle route problem, this study further develops an improved bat algorithm to yield meta-optimal solutions for the model in a reasonable amount of time. When this was applied to a case study in Nanjing City, China, the mileage and satisfaction of the proposed model were reduced by 1.4 km and increased by 7.1%, respectively, compared with the traditional model. Sensitivity analyses were also performed to investigate the impact of the number of designed bus routes and weights of objective functions on the model performance. Finally, a comparison of Cplex, standard bat algorithm, and group search optimizer is analyzed to verify the validity of the proposed algorithm.

To overcome limitations inherent in existing mechanical performance prediction models for pervious concrete, including material constraints, limited applicability, and inadequate accuracy, this study employs a deep learning approach to construct a Convolutional Neural Network (CNN) model with three convolutional modules. The primary objective of the model is to precisely predict the 28-day compressive strength of pervious concrete. Eight input variables, encompassing coarse and fine aggregate content, water content, admixture content, cement content, fly ash content, and silica fume content, were selected for the model. The dataset utilized for both model training and testing consists of 111 sample sets. To ensure the model’s coverage within the practical range of pervious concrete strength and to enhance its robustness in real-world applications, an additional 12 sets of experimental data were incorporated for training and testing. The research findings indicate that, in comparison to the conventional machine learning method of Backpropagation (BP) neural networks, the developed CNN prediction model in this paper demonstrates a higher coefficient of determination, reaching 0.938, on the test dataset. The mean absolute percentage error is 9.13%, signifying that the proposed prediction model exhibits notable accuracy and universality in predicting the 28-day compressive strength of pervious concrete, regardless of the materials used in its preparation.

In this paper a Bayesian method is proposed to estimate dynamic origin–destination (O–D) demand. The proposed method can synthesize multiple sources of data collected by various sensors, including link counts, turning movements at intersections, flows, and travel times on partial paths. Time-dependent demand for each O–D pair at each departure time is assumed to satisfy the normal distribution. The connections among multiple sources of field data and O–D demands for all departure times are established by their variance-covariance matrices. Given the prior distribution of dynamic O–D demands, the posterior distribution is developed by updating the traffic count information. Then, based on the posterior distribution, both point estimation and the corresponding confidence intervals of O–D demand variables are estimated. Further, a stepwise algorithm that can avoid matrix inversion, in which traffic counts are updated one by one, is proposed. Finally, a numerical example is conducted on Nguyen–Dupuis network to demonstrate the effectiveness of the proposed Bayesian method and solution algorithm. Results show that the total O–D variance is decreasing with each added traffic count, implying that updating traffic counts reduces O–D demand uncertainty. Using the proposed method, both total error and source-specific errors between estimated and observed traffic counts decrease by iteration. Specifically, using 52 multiple sources of traffic counts, the relative errors of almost 50% traffic counts are less than 5%, the relative errors of 85% traffic counts are less than 10%, the total error between the estimated and “true” O–D demands is relatively small, and the O–D demand estimation accuracy can be improved by using more traffic counts. It concludes that the proposed Bayesian method can effectively synthesize multiple sources of data and estimate dynamic O–D demands with fine accuracy.

Most existing network sensor location problem (NSLP) models are designed to identify the number of sensors with fixed costs and installation locations, and sensors are assumed to be installed permanently. However, sometimes sensors are carried by individuals to collect traffic data measurements manually at fixed locations. Hence, their duration of operation for which traffic data measurements are collected is limited, and their costs are not fixed as they are correlated with the duration of operation. This paper proposes a NSLP model that integrates optimal heterogeneous sensor deployment and operation strategies for the dynamic O-D demand estimates under budget constraints. The deployment strategy consists of the numbers of link and node sensors and their installation locations. The operation strategy includes sensors’ start time and duration of operation, which has not been addressed in previous studies. An algorithm is developed to solve the proposed model. Numerical experiments performed on a network from a part of Chennai, India show that the proposed model can identify the optimal heterogeneous sensor deployment and operation strategies with the maximum dynamic O-D demand estimation accuracy.

The adaptive traffic signal control system is a key component of intelligent transportation systems and has a primary role in effectively reducing traffic congestion. The high costs of implementation and maintenance limit the applicability of the adaptive traffic signal control system, especially in developing countries. This paper proposes a low-cost adaptive signal control method that is easy to implement. Two detectors are installed in each vehicle lane at an optimal location determined by the proposed method to detect green and red redundancy time, based on which the original signal timing is adjusted through a signal controller. The proposed method is evaluated through case studies with low and high volume-to-capacity ratio intersections. The results show that the proposed adaptive signal control method can significantly reduce total traffic delay at intersections.

Evaluating the safety risk of rural roadsides is critical for achieving reasonable allocation of a limited budget and avoiding excessive installation of safety facilities. To assess the safety risk of rural roadsides when the crash data are unavailable or missing, this study proposed a Bayesian Network (BN) method that uses the experts’ judgments on the conditional probability of different safety risk factors to evaluate the safety risk of rural roadsides. Eight factors were considered, including seven factors identified in the literature and a new factor named access point density. To validate the effectiveness of the proposed method, a case study was conducted using 19.42 km long road networks in the rural area of Nantong, China. By comparing the results of the proposed method and run-off-road (ROR) crash data from 2015–2016 in the study area, the road segments with higher safety risk levels identified by the proposed method were found to be statistically significantly correlated with higher crash severity based on the crash data. In addition, by comparing the respective results evaluated by eight factors and seven factors (a new factor removed), we also found that access point density significantly contributed to the safety risk of rural roadsides. These results show that the proposed method can be considered as a low-cost solution to evaluating the safety risk of rural roadsides with relatively high accuracy, especially for areas with large rural road networks and incomplete ROR crash data due to budget limitation, human errors, negligence, or inconsistent crash recordings.