The primary aim of this investigation was to assess the impact of varying the ratio of gum arabic to maltodextrin and employing diverse encapsulation techniques on the properties of the powdered substance and the capacity to retain the aromatic attributes of terebinth fruit oil. Distinct ratios of gum arabic to maltodextrin (75:25, 50:50, and 25:75) were employed to fabricate oil-in-water emulsions. The utmost stability of the emulsion was realized at a gum arabic to maltodextrin ratio of 75:25, characterized by a minimal creaming index and an even and small-scale dispersion. The encapsulation techniques employed included spray drying (SD), spray freeze-drying (SFD), and freeze-drying (FD). These methodologies were compared based on encapsulation efficiency, desiccation yield, powder attributes, and the capacity to retain aroma. The encapsulation efficiencies were notably higher (>90%) in SD, particularly with the application of an ultrasonic nozzle and a two-fluidized nozzle (2FN), in contrast to those obtained through SFD and FD. Notably, SD employing an ultrasonic nozzle exhibited superior preservation of volatiles (73.19%) compared to FD (24.45%), SD-2FN (62.34%), and SFD (14.23%). Among the various components, α-pinene and linalool stood out with near-perfect retention rates, close to 100%.

In this study, pectin was extracted from the pistachio hull using two methods: conventional extraction and ultrasound-assisted extraction. Water and citric acid solution were tested separately as extraction solvents in both conventional and ultrasound methods. The highest yield (32.3 ± 1.44%) was obtained using a citric acid solution in the conventional extraction method. The pectin extracted with this method had 38.94 g acid per 100 g dry pectin extract. The galacturonic acid and ash contents were 65.81 ± 1.51 and 1.57 ± 0.03%, respectively. The pistachio hull pectin was under the low methoxy pectin group with a 19.29 ± 0.41% degree of esterification. The emulsifying property of the pectin extracted was investigated in an oil-in-water emulsion system at six different pectin concentrations (2, 4, 5, 6, 8, and 10% w/w) and at a fixed oil ratio (20% w/w). Emulsion performance was investigated in terms of emulsion stability, microstructural characteristics, droplet size, and rheological properties. The most stable emulsion was obtained at a 6% pectin concentration. The emulsifying activity index, emulsion stability index, droplet size, consistency index, and flow behavior index were 172.85 ± 0.59 m²/g, 158.28 ± 3.41 min, 6.08 ± 0.04 µm, 0.72 ± 0.001 Pa·sⁿ, and 0.752 ± 0.005 at this concentration, respectively.