Unmanned aerial vehicle (UAV) tilt photography technology has gradually become a new technical means of disaster risk identification. This technology combines UAVs, satellite remote sensing, and ground online monitoring systems to establish an integrated space–sky–Earth system that can be used for tailings pond risk identification. With the use of this system for visual interpretation, water body identification, and monitoring data analysis, multiple types of monitoring parameters of a typical tailings pond in China, such as the seepage line and surface deformation, were obtained. Moreover, intelligent fusion analysis was performed of multisource data to outline the problems affecting tailings safety in the process of elevation expansion and irregular ore discharge of the tailings pond. Warning values of different levels were obtained to assess the overall safety condition of the tailings pond, and the proposed technology was verified. The research results could provide a new basis for accurate evaluation of the running state of tailings ponds and offer an effective remote monitoring means for tailings pond enterprises and supervisory departments.

Because of the continuous exploitation of metal minerals and the limited availability of land resources, many tailings ponds have been expanded. It is of great importance to dynamically calculate the critical parameters of flooding and sand velocity after a collapse, and quickly determine the dangerous area downstream on reducing the hidden dangers for an accident. In view of the limitations of the single finite element and discrete element methods for the simulation of tailings pond instability, the authors use the finite element and discrete element coupling method (GDEM) for the first time to carry out a dynamical process for numerical simulation of the evolution of a tailings pond collapse. The sediment movement and submerged range were compared with the results of the Volume of Fluid (VOF) method. The comparison shows that the change in drainage flow at the dam foundation position and the depth change in the downstream sensitive point after the dam break are consistent with the VOF calculation results, which indicates that the GDEM can be used as an effective means for the analysis of tailings dam failure. The calculation results of this method can provide technical support for the determination of dangerous areas downstream of tailings ponds and the safety management of key areas.

There has been a frequent occurrence of tailing dam failures in recent years, leading to severe repercussions. Flood overtopping is an important element contributing to these failures. Nevertheless, there is a scarcity of studies about the evolutionary mechanisms of dam breaches resulting from flood overtopping. In order to fill this knowledge vacuum, this study focused on the evolutionary characteristics and triggering mechanisms of overtopping failures, utilizing the Heshangyu tailings pond as a prototype. The process of overtopping breach evolution was revealed by the conduction of small-scale model testing. A scaled-down replica of the tailings pond was constructed at a ratio of 1:150, and a controlled experiment was conducted to simulate a breach in the dam caused by water overflowing. Based on the results, the following conclusions were drawn: (1) The rise in water level in the pond caused the tailings to become saturated, leading to liquefaction flow and local slope sliding at the initial dam. If the sediment-carrying capacity of the overflowing water exceeded the shear strength of the tailings, water erosion would accelerate landslides on the slope, generating a sand-laden water flow. (2) The breach was primarily influenced by water erosion, which subsequently resulted in both laterally widened and longitudinally deepened breach. As the breach expanded, the sand-carrying capacity of the water flow increased, leading to a faster rate of failure. The breach process of overtopping can be categorized into four distinct stages: gully formation stage, lateral broadening stage of gully, cracks and collapse on the slope surface, and stable stage of collapse. (3) The tailings from the outflow spread downstream in a radial pattern, forming an alluvial fan. Additionally, the depth of the deposited mud first increased and subsequently declined as the distance from the breach grew. The findings of this research provide an important basis for the prevention and control of tailings dam breach disasters due to overtopping.

Coal gangue (CG) ranks among China’s most significant industrial solid by-products. In response to China’s carbon neutrality commitments and the growing emphasis on resource recycling, finding effective ways to valorize CG has emerged as a pressing concern. Based on the mineral composition and chemical composition characteristics of CG, this study systematically investigated the enhancement effects of three alkali activators (Na₂SiO₃, NaOH, and Ca(OH)₂) on the cementitious properties of CG. Through different dosage and compressive strength tests, the efficiency ranking of the three activators was determined as follows: Na₂SiO₃ > Ca(OH)₂ > NaOH. A 10% Na₂SiO₃ dosage combined with 28-day curing was identified as the optimal condition for achieving sufficient reaction and structural densification. Under these conditions, the compressive strength of CG cementitious material reached 6.4 MPa, representing an increase of 190.9% compared to the blank group (2.2 MPa), significantly superior to Ca(OH)₂ (69.55%) and NaOH (62.27%). X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analyses revealed that alkali activators function primarily by disrupting the crystalline framework of CG, promoting the cross-linking polymerization of silicon–aluminum monomers to generate dense cementitious products, thereby improving material performance. The Na₂SiO₃ is attributed to its “dual activation effect”, providing OH⁻ to create an alkaline environment while supplying reactive silicate ions (SiO₃²⁻) to accelerate N-A-S-H gel and C-A-S-H gel formation. These findings offer guidance for optimizing CG-based cementitious formulations for formula optimization and large-scale utilization of CG cementitious materials.