A digital-twin-model-based optimal control system is presented for the steel continuous casting process. The system is designed for the coordinated optimization and dynamic control of secondary cooling and final electromagnetic stirring (FEMS), and involves three related parts. Firstly, a three dimensional real-time heat transfer model is established as the digital twin of the heat transfer process of continuous casting; for high accuracy, it is calibrated offline and calibrated online using measurements of the surface temperatures and shell thicknesses (only offline). Secondly, according to metallurgical rules, cooling and stirring are optimized coordinatively, based on the established digital-twin model and chaos particle swarm optimization algorithm. Thirdly, cooling and stirring are further dynamically controlled for quality stability. Finally, the system is applied in a bloom caster with model errors ≤ ±10 °C and control errors ≤ ±4 °C, which reduces the macro-segregation over grade 1.5 from 11% to 3.3%.
1 September 2014 in International Journal of Heat and Mass Transfer
To simulate dendrite growth with different orientations more efficiently, a high-performance cellular automata (CA) model based on heterogenous central processing unit (CPU)+ graphics processing unit (GPU) architecture has been proposed in this paper. Firstly, the decentered square algorithm (DCSA) is used to simulate the morphology of dendrite with different orientations. Secondly, parallel algorithms are proposed to take full advantage of many cores by maximizing computational parallelism. Thirdly, in order to further improve the calculation efficiency, the task scheduling scheme using multi-stream is designed to solve the waiting problem among independent tasks, improving task parallelism. Then, the present model was validated by comparing its steady dendrite tip velocity with the Lipton–Glicksman–Kurz (LGK) analytical model, which shows great agreement. Finally, it is applied to simulate the dendrite growth of the binary alloy, which proves that the present model can not only simulate the clear dendrite morphology with different orientations and secondary arms, but also show a good agreement with the in situ experiment. In addition, compared with the traditional CPU model, the speedup of this model is up to 158×, which provides a great acceleration.
In this paper, a specially designed three dimensional transient heat transfer model has been developed for initial stage of steel continuous casting process. Firstly, a general three dimensional heat transfer model for continuous casting process has been established, and it is discretized by finite volume method and solved by alternative direction implicit method. For transient simulation of initial stage, the fixed-length moving bloom with dummy bar at its bottom experiences time-variant boundary conditions, while the filling process is also equivalent to moving process. Secondly, the transient model has been calibrated by surface temperature measurements by pyrometer and shell-thickness measurements by nail-shooting. Online temperature measurement for verification indicates the calibrated model is reliable as the maximum error between calculations and measurements are within ±28°C, and soon in less than 80s the error will be reduced to within ±5°C. Thirdly, uncertainty caused by dummy bar's length and thermo-physical properties has been studied, and the results indicate that the uncertainty is quite small and acceptable. Finally, the model has been applied to optimizing the secondary cooling water flows and cut length of strand head.