The complex-load environment of offshore monopile foundations makes the combination of waves and current, and the variation in water depth, important factors for local scour. A flume test model of flow–pile–soil coupling for large-diameter monopile foundations is established, which comprehensively considers the combined reciprocating action of wave/current and the influence of tide depth. The precision of the experiment is ensured by the extension method of series models. The results show that the local scour caused by tides and the wave–current combination is obviously different from the unidirectional wave–current combination. The equilibrium scour depth obtained by the test is found to have some deviation from the predicted scour-depth equation. The maximum scour depth decreased with the increase in water depth within the range of 3 to 6 times the pile diameter. The bed shear-stress equation was generally consistent with the scouring-depth rule measured by the model, which can be considered to evaluate the rationality of the test results.

As an innovative foundation type specifically developed for seabed conditions characterized by shallow overburden overlying bedrock, driven embedded rock-socketed jacket offshore wind turbines achieve high bearing capacity by embedding the pile tips into the bedrock. However, the mechanical behavior of this foundation system has not yet been fully clarified. In this study, based on the engineering conditions of an offshore wind power project in Fujian, a 1:100 scaled physical model test is conducted to validate Plaxis 3D finite-element model. On this basis, a parametric sensitivity analysis is conducted to investigate the influences of key geotechnical properties, pile rock-socketed depth, and geometric parameters, with the aim of elucidating the mechanisms governing the lateral loading behavior of the jacket foundation. The results show that the numerical simulations are in good agreement with the experimental measurements. Among all piles, the front-row pile exhibits the most significant displacement at the pile top at the mudline, reflecting the asymmetry in load transfer and deformation of the pile foundation system. The ultimate bearing capacity varies by about 91.7% among different bedrock types, while the influence of rock weathering degree on the lateral bearing performance of the foundation is about 4.7%. The effects of Pile rock-socketed depth and geometric parameters on the lateral bearing capacity of the foundation are approximately 15.2% and 80.8%, respectively. A critical threshold for rock-socket depth exists at about 6D (where D is the pile diameter), beyond which further improvements in embedment depth result in diminishing improvements in lateral bearing capacity.