Today, packaging is an integral part of any food product, preserving its quality and safety. The use of biodegradable packaging as an alternative to conventional polymers reduces the consumption of synthetic polymers and their negative impacts on the environment. The purpose of this study was to analyze the properties of a biodegradable compound based on polylactide (PLA) and polybutylene adipate terephthalate (PBAT). Test samples were made by blown extrusion. The structural, physical, and mechanical properties of the PLA/PBAT material were studied. The property variations during compost storage in the lab were monitored for 365 days. The physical and mechanical properties were measured in accordance with the GOST 14236-2017 (ISO 527-2:2012) standard. We measured the tensile strength and elongation at rupture. We used attenuated total reflectance Fourier transform infrared microscopy (ATR-FTIR) to analyze the changes in the material structure. This paper presents a comparative analysis of the strengths of a biodegradable material and grade H polyethylene film (manufactured to GOST 10354-82). PLA/PBAT’s longitudinal and transverse tensile strengths are 14.08% and 32.59% lower than those of LDPE, respectively. Nevertheless, the results indicate that, given its physical and mechanical properties, the PLA/PBAT material can be an alternative to conventional PE film food packaging. The structural study results are in good agreement with the physical and mechanical tests. Micrographs clearly show the surface deformations of the biodegradable material. They increase with the compost storage duration. The scanning microscopy (SEM) surface analysis of the original PLA/PBAT films indicated that the PLA structure is similar to that of a multilayer shell or sponge, which is visible at medium and especially high magnification. We conclude that PLA/PBAT-based biodegradable materials are potential substitutes for conventional PE polymer films.
Ensuring the microbiological safety of food products is a problem of current interest. The use of antimicrobial packaging materials is a way of solving the problem. When developing packaging materials, it is advisable to use a modern approach based on the creation of biodegradable materials. The difficulty in the selection of the polymer compositions’ components lies in solving the dilemma of the joint introduction and processing of antimicrobial and biodegradable agents. The studies of the ultrasound treatment on the melts of polymer mixtures showed an increase in the dispersion process of the components of the mixture. In this regard, this work aimed to study the effect of the ultrasonic treatment on the melts of polymer compositions containing thermoplastic starch and birch bark extract (BBE). In the work, the properties of PE-based packaging materials with various BBE concentrations obtained with ultrasonic treatment of melts on a laboratory extruder were studied. Biodegradable polymer compositions containing thermoplastic starch and BBE, obtained with the use of the ultrasonic treatment during extrusion, were investigated. The methods for studying rheological, physic-mechanical, antimicrobial properties and sanitary chemical indicators of materials were used in the article. It was found that ultrasonic treatment increases the melt flow and contributes to the production of materials with the uniform distribution of additives. The BBE content from 1.0% and higher in the contents of the material provides antimicrobial properties. When studying the permeability of oxygen and water vapor of the polymer compositions based on PE and BBE, it was found that the introduction of a filler increases vapor permeability by about 8–12% compared with control samples. The optimal concentration of BBE in polyethylene compositions containing thermoplastic starch was determined. The extension of the shelf life of the food product during storage in the developed material was established.
The aspects of component visualization of the antimicrobial triterpenoids (betulin) additive, both on the surface and in the bulk of the polymer, constituting food film packaging, are considered. This paper presents new knowledge about the morphology and surface structure of modified films using three independent methodological approaches: optical microscopy; a histological method adapted to packaging materials; and a method of attenuated total internal reflection (ATR) spectroscopy in the infrared region with Fourier transform. The use of these methods shows the betulin granules, individual or forming chains. To visualize the antimicrobial additive in the polymer bulk, a modified histological method adapted for film materials and attenuated total internal reflection (ATR) spectroscopy in the infrared region were used with Fourier transform using a Lumos Bruker microscope (Germany) (ATR crystal based on germanium). Sample sections were analyzed using Leica 818 blades at an angle of 45 degrees. The histological method consists of the study of a biological object thin section, in the transmitted light of a microscope, stained with contrast dyes to reveal its structures, and placed on a glass slide. In the method modified for the present study, instead of a biological one, a synthetic object was used, namely the developed film materials with the addition of natural organic origin. Individual granules are about 2 µm long; chains can be up to 10 µm long. The thickness of the granules ranged from 1 to 1.5 microns. It can be seen that the depth distribution of granules in the film from the inner surface to the outer one is rather uniform. Spectroscopic studies using the method of automatic ATR mapping in the region of 880 cm−1 made it possible to evaluate the distribution of an antimicrobial additive based on triterpenoids on the surface and in the polymer bulk.
The demand for modified packaging materials increases annually. At the same time, there is growing interest in the development of functional packaging. The incorporation of modifiers, stabilizers, and fillers into polymer matrices can enhance the functionality of the material but may also negatively affect its safety. Polymers are susceptible to degradation, which negatively affects their strength and tensile properties under external factors (physical, chemical or environmental). Packaging containing antimicrobial and antioxidant agents is among the most promising, as it contributes to the product quality during storage. Films based on calcium carbonate (CaCO3) and dihydroquercetin (DHQ) remain insufficiently studied, despite their potential. Such materials are especially relevant for fatty products with a large contact surface area, including butter, cheese, and other solid high-fat foods. This study aimed to comprehensively investigate the structural and tensile properties of polyethylene films modified with varying contents of CaCO3 and DHQ. The films were produced via blown film extrusion using a laboratory extruder (SJ-28). Surface analysis was performed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Fourier-transform infrared (FTIR) spectroscopy was used to examine the film’s composition. The results showed that the introduction of more than 40.0 wt.% of CaCO3 into the polymer base affected the strength properties. The conducted studies of the physical and mechanical properties of LDPE film samples filled with CaCO3 showed significant changes in the samples containing more than 50.0 wt.% of the filler, with an increase in strength of more than 40.0%. The relative elongation at break after 50.0 wt.% decreased by more than 75.0%. These results indicate that to achieve the best strength properties for packaging materials, it is recommended to fill them to a maximum of 40.0 wt.%. The introduction of the antioxidant DHQ had almost no effect on the strength of the modified films. SEM analysis of films with high CaCO3 content and DHQ revealed visible antioxidant particles on the film surface, suggesting enhanced antioxidant potential at the interface between the film and dairy products. AFM analysis confirmed that a CaCO3 40.0 wt.% content altered the surface roughness and heterogeneity of the films. FTIR spectroscopy revealed that the incorporation of CaCO3 influenced the overall spectral profile of polyethylene, resulting in decreased peak intensities depending on the concentration of the filler. Based on these results, the modified polyethylene-based film with CaCO3 and DHQ shows potential for use as food packaging with antioxidant properties.
Products of the polymer industry, the lion's share of which is food packaging, create a significant threat to the environment, which requires a search for the most effective and functional solutions to this problem. Every year, the production of polymer packaging is growing by an average of 10-12%, and last year, due to the worldwide spread of SARS-CoV-2 (COVID-19) and its strains, the increase was more than 20%. A solution to the environmental problem is possible using the main basic approaches: disposal and recycling of waste, which will give the possibility of the “second life” to already used polymers; development and creation of new biodegradable materials capable of degrading completely under the influence of external factors into relatively safer substances. However, it should be noted that the first method has a number of significant drawbacks associated with the difficulty in controlling the amount of recycling processes carried out, which can potentially lead to an increase in migration processes from polymeric materials. The second way to solve the environmental problem of packaging disposal and recycling is the direction associated with the creation of polymeric materials with the replacement of part of the traditional commercial synthetic bases with organic and inorganic fillers in various concentrations. However, the most promising way to handle packaging waste, in our opinion, is the development of technologies aimed at creating fully biodegradable materials with a regulated service life, which, after their life cycle, are disposed of in a short time without harming the environment. This review is devoted to the analysis of the market of modern biodegradable materials and methods for obtaining degradable compositions that can become a significant alternative to traditional plastics.