Terahertz absorbers have been extensively investigated by researchers due to their applications in thermophotovoltaic energy conversion and sensors, but a key factor limiting their development is the lack of vital and versatile materials. Ferromagnetic shape memory alloys (FSMAs) offer a novel remedy for tunable metamaterials due to their brilliant recovery of deformation, remote control, and transient response. In this study, we propose a tunable absorber based on magnetic field tuning, consisting of Ni–Mn–Sn ferro-magnetic shape memory alloy films in fractal geometry and optically excited Si plates. Numerical analysis shows that the proposed absorber has an absorbance bandwidth of 1.129 THz above 90% between 1.950 THz and 3.079 THz. The absorber geometry can be regulated by an external magnetic field, allowing dynamic switching between broadband and narrowband absorption modes, the latter showing an ultra-narrow bandwidth and a high-quality factor Q of ~25.8. The proposed terahertz absorber has several advantages over current state-of-the-art bifunctional absorbers, including its ultra-thin structure of 10.39 μm and an additional switching function. The absorption can be continuously tuned from 90% to 5% when the light-excited silicon plate is transferred from the insulator state to the metal state. This study presents a promising alternative strategy for developing actively regulated and versatile terahertz-integrated devices.

Ni-Mn-Sn ferromagnetic shape memory alloys, which can be stimulated by an external magnetic field, exhibit a fast response and have aroused wide attention. However, the fixed and restricted working temperature range has become a challenge in practical application. Here, we introduced strain engineering, which is an effective strategy to dynamically tune the broad working temperature region of Ni-Co-Mn-Sn alloys. The influence of biaxial strain on the working temperature range of Ni-Co-Mn-Sn alloy was systematically investigated by the ab initio calculation. These calculation results show a wide working temperature range (200 K) in Ni₁₄Co₂Mn₁₃Sn₃ FSMAs can be achieved with a slight strain from 1.5% to −1.5%, and this wide working temperature range makes Ni₁₄Co₂Mn₁₃Sn₃ meet the application requirements for both low-temperature and high-temperature (151–356 K) simultaneously. Moreover, strain engineering is demonstrated to be an effective method of tuning martensitic transformation. The strain can enhance the stability of the Ni₁₄Co₂Mn₁₃Sn₃ martensitic phase. In addition, the effects of strain on the magnetic properties and the martensitic transformation are explained by the electronic structure in Ni₁₄Co₂Mn₁₃Sn₃ FSMAs.