In this paper, a beta radioluminescent battery with different radioisotopes is studied, and different parameters of the proposed structure are optimized. These parameters include the luminescent layer thickness, the doping concentration in the semiconductor P-N junction, etc. Some of the parameters have an inverse effect on the battery outputs. So, a trade-off is sought between them to increase efficiency. Each part of the proposed structure is divided into much smaller parts in the simulations to ensure proper tracking of photons and the creation of electron holes in the semiconductor layer. Also, the passage of particles through each layer is carefully reviewed and calculated in terms of particle crossing percentage, their reflection percentage, rate of self-absorption, etc. Finally, the power, open-circuit voltage, and short-circuit current density of the proposed battery versus the main parameter changes are presented.
14 February 2024 in Measurement Science and Technology
Measurement while drilling (MWD) tools include accelerometers, magnetometers and temperature sensors. The accuracy of these sensors are highly important in measuring inclination and Azimuth angle parameters in a directional well. These factors can increase costs when drilling a directional well. During the past years, many efforts have been made to increase the accuracy of these tools. Accuracy of accelerometer and magnetometer sensors are influenced by scale, bias and non-orthogonal errors. Considering that MWD systems work in a wide range of temperatures (for example 0 °C–150 °C), the temperature parameter should also be added to the factors affecting the errors. Here, after making a sample of MWD tool, a method to calibrate the tool using mathematical model based on total field calibration algorithm, least square method and the transfer matrix is presented. Calibrated parameters at ambient temperature are calculated with acceptable speed. Then, a method for calculating temperature coefficients in the desired range is provided. Compared to the case where temperature coefficients are not considered, the obtained results show a significantly increased accuracy of Inclination and Azimuth parameters through the use of these coefficients.
6 November 2024 in The European Physical Journal Plus
This study simulated and designed a cyclotron cavity using the circuit model. Based on the full wave electromagnetic numerical simulation, this study proposes an accurate circuit model for all sections of the cavity which allows the investigation of the effects of different parts of the cavity on its characteristics. This procedure could be utilized to estimate structural parameters to avoid time consuming numerical simulations. The resonance frequency of the designed cavity is 71 MHz. A full wave electromagnetic simulation was done based on the finite difference time domain method using CST Microwave Studio.