This paper makes a complete investigation of flexible longitudinal zigzag (FLZ) energy harvesters for the purpose of enhancing energy harvesting from low-frequency and low-amplitude excitation. A general theoretical model of the FLZ energy harvesters with large joint block mass is proposed. In order to verify the accuracy of the theoretical model, both experimental results and finite element analysis via ANSYS software are presented. Results show that the theoretical model can successfully predict the dynamic response and the output power of the FLZ energy harvesters. Both theoretical and experimental results demonstrate that the proposed energy harvesters can effectively harvest vibration energy even when the direction of excitation relative to the harvester varies from 0° to 90°. Under the low excitation level of 0.18 m s −2 , the experimental maximum output power of a FLZ energy harvester with five beams was found to be 1.016 mW. Finally, the results indicate that the proposed structure is capable of effective energy conversion across a large range of excitation angles at low-frequency and low-amplitude excitations, which makes it suitable for a wide range of working conditions.
1 May 2021 in Journal of Wind Engineering and Industrial Aerodynamics
Carbon black nanocomposites are complex systems that show potential for engineering applications. Understanding the influence of preparation methods on the engineering properties of these materials is critical for widespread deployment. In this study, the fidelity of a stochastic fractal aggregate placement algorithm is explored. A high-speed spin-coater is deployed for the creation of nanocomposite thin films of varying dispersion characteristics, which are imaged via light microscopy. Statistical analysis is performed and compared to 2D image statistics of stochastically generated RVEs with comparable volumetric properties. Correlations between simulation variables and image statistics are examined. Future and current works are discussed.
Conductive polymer composites (CPCs) have shown potential for structural health monitoring applications based on repeated findings of irreversible transducer electromechanical property change due to fatigue. In this research, a high-fidelity stochastic modeling framework is explored for predicting the electromechanical properties of spherical element-based CPC materials at bulk scales. CPC dogbone specimens are manufactured via casting and their electromechanical properties are characterized via uniaxial tensile testing. Model parameter tuning, demonstrated in previous works, is deployed for improved simulation fidelity. Modeled predictions are found in agreement with experimental results and compared to predictions from a popular analytical model in the literature.