Investigations of surface modifications on cast titanium surfaces and titanium–porcelain adhesion were performed. Cast pure titanium was subjected to surface modifications by sandblasting, preoxidation, and SnOx coating by sol-gel process. The adhesion between the titanium and porcelain was evaluated by a three-point flexure bonding test. The X-ray diffraction (XRD) and scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) results revealed that failure of the titanium–porcelain predominantly occurred at the titanium–oxide interface after sandblasting and preoxidation treatments. The SnOx film with small spherical pores obtained at 300°C served as an effective oxygen diffusion barrier and improved titanium–porcelain adhesion. With the temperature elevated, SnO was oxidized to SnO2 and the film microcracked, which resulted in the decrease of the titanium–porcelain bonding strength.
1 January 2018 in Advances in Materials Science and Engineering
Star‐like nano‐ZrO2 has been synthesized using Zr(NO3)4·5H2O as zirconium source by a hydrothermal process without any template and surfactant. The structure of the as‐prepared ZrO2 powder was investigated by multiple advanced analytical methods. The results showed that CH3COO− and NO3− had great effects on the formation of star‐like ZrO2 nanostructures. The as‐prepared ZrO2 had a superior catalytic activity, and the reason for it was analyzed by UV‐Vis diffuse reflectance spectroscopy. The effect of raw material ratios on the photocatalytic property of ZrO2 was studied. The synthesized ZrO2 showed a narrow bandgap (3.50–3.85 eV) and an excellent photocatalytic activity, and the degradation of RhB was up to nearly 100% in 30 min with this photocatalyst.
1 November 2019 in Journal of Alloys and Compounds