In this innovative research, we aim to reveal pyrazole-based Schiff bases as new multi-target agents. In this context, we re-synthesized three sets of pyrazole-based Schiff bases, 5a–f, 6a–f, and 7a–f, to evaluate their biological applications. The data from in vitro biological assays (including antioxidant and scavenging activities, anti-diabetes, anti-Alzheimer’s, and anti-inflammatory properties) of the pyrazole-based Schiff bases 5a–f, 6a–f, and 7a–f showed that the six pyrazole-based Schiff bases 5a, 5d, 5e, 5f, 7a, and 7f possess the highest biological properties among the compounds evaluated. The cytotoxicity against lung (A549) and colon (Caco-2) human cancer types, as well as normal lung (WI-38) cell lines, was evaluated. The data from the cytotoxicity investigation demonstrated that the three Schiff bases 5d, 5e, and 7a are active against lung (A549) cells, while the two Schiff bases 5e and 7a exhibited the highest cytotoxicity towards colon (Caco-2) cells. Additionally, the enzymatic activities against caspase-3 and Bcl-2 of the six pyrazole-based Schiff bases 5a, 5d, 5e, 5f, 7a, and 7f were evaluated. Furthermore, we assessed the in silico absorption, distribution, metabolism, and toxicity (ADMT) properties of the more potent pyrazole-based Schiff bases. After modifying the structures of the six pyrazole-based Schiff bases, we plan to further extend the studies in the future.

This paper studies the synthesis, characterization, and application of ZnFe₂O₄ nanoparticles for the removal of rhodamine b dye from aqueous media. Utilizing the combustion procedure, ZnFe₂O₄ nanoparticles were synthesized using two different fuels: glutamine (SG) and L-arginine (SA). In addition, the synthesized ZnFe₂O₄ nanoparticles were characterized through various techniques, including Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), energy-dispersive X-ray (EDX), high resolution transmission electron microscope (HR-TEM), and Brunauer-Emmett-Teller (BET) surface area analysis. XRD analysis verified the creation of a ZnFe₂O₄ cubic spinel structure without any contaminants, revealing average crystallite sizes of 43.72 and 29.38 nm for the SG and SA samples, respectively. The FTIR spectra exhibited peaks indicative of metal-oxygen bond stretching, verifying the presence of a spinel formation. Elemental analysis via EDX confirmed the stoichiometric composition typical of zinc ferrite. In addition, FE-SEM imaging displayed that the SG and SA samples are composed of particles with irregular and spherical shapes, measuring average diameters of 135.11 and 59.89 nm, respectively. Furthermore, the BET surface area of the SG and SA samples is 60 and 85 m²/g, respectively. The maximum adsorption capacity of the SA sample (409.84 mg/g) towards rhodamine b dye was higher than that of the SG sample (279.33 mg/g), which was ascribed to its larger surface area and porosity. Kinetic and equilibrium studies revealed that the adsorption process of rhodamine b dye onto the SG and SA samples followed the Langmuir isotherm and pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process was spontaneous, exothermic, and physical. The study concludes that ZnFe₂O₄ nanoparticles synthesized using L-arginine (SA) exhibit enhanced rhodamine b dye removal efficiency due to their smaller size, increased surface area, and higher porosity compared to those synthesized with glutamine (SG). The optimum conditions for the adsorption process of rhodamine b dye were found to be at pH 10, a contact time of 70 min, and a temperature of 298 K. These findings underscore the potential of L-arginine-synthesized ZnFe₂O₄ nanoparticles for effective and sustainable environmental cleanup applications.

In this work, amorphous and crystalline novel products based on Zr, Mg, and Mn were facilely fabricated through the Pechini sol–gel procedure using inexpensive chemicals and an uncomplicated apparatus. Also, these products showed high efficiency as novel adsorbents in getting rid of basic fuchsin dye from aqueous solutions. The adsorbent, which was fabricated before calcination, was abbreviated as KE. In addition, the adsorbents, which were created at 500 and 700 °C, were designated as KE500 and KE700, respectively. The created adsorbents were characterized using high-level transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), N₂ adsorption/desorption analyzer, and field emission scanning electron microscope (FE-SEM). The XRD showed that the KE adsorbent is amorphous, whereas the KE500 and KE700 adsorbents are mixtures of ZrO₂, MgMn₂O₄, and Mg(Mg_0.333Mn_1.333)O₄ nanostructures. The HR-TEM exhibited that the KE adsorbent consists of very fine irregular shapes, whereas the KE500 adsorbent contains quasi-spherical particles with a mean diameter of 45.16 nm. Furthermore, the HR-TEM exhibited that the KE700 adsorbent consists of polyhedral shapes with a mean diameter of 76.28 nm. Furthermore, the BET surface area of the KE, KE500, and KE700 adsorbents is 67.85, 20.15, and 13.60 m²/g, respectively. Additionally, the elimination of basic fuchsin dye by the KE, KE500, and KE700 adsorbents is exothermic, physical in nature, and follows the pseudo-first-order as well as Langmuir equations. Further, the maximum uptake capabilities of the KE, KE500, and KE700 adsorbents toward basic fuchsin dye are 239.81, 174.83, and 93.19 mg/g, respectively.

In this paper, a novel Zn(II) and Co(II) Schiff base complexes were synthesized by template method via refluxing 2,3-Naphthalenedicarboxaldehyde, Metal(II) chloride (Metal = Zn or Co), and L-phenylalanine. ZnO and Co₃O₄ nanoparticles were synthesized by thermal decomposition of Zn(II) and Co(II) complexes, respectively. The products were characterized using different instruments such as CHN, Conductivity, FT-IR, XRD, HR-TEM, and UV–Vis spectrophotometer. The experimental results of elemental analysis for Zn(II) and Co(II) complexes, agree with the calculated results, indicating that the Zn(II) and Co(II) complexes have 1:1 ligand/metal ratios. The molar conductance of the Zn(II) and Co(II) complexes, is less than 5 Ω⁻¹cm⁻¹mol⁻¹, confirming the non-electrolytic nature of the synthesized complexes. The average crystallite diameter of the ZnO and Co₃O₄ samples is 39.64 and 30.38 nm, respectively. The optical energy gap of the ZnO and Co₃O₄ samples are 2.75 and 3.25 eV, respectively. Methylene blue dye was utilized to examine the photocatalytic properties of the synthesized nanoparticles using UV irradiations in the absence and presence of hydrogen peroxide. The % degradation of the methylene blue dye in the presence of hydrogen peroxide using ZnO and Co₃O₄ samples after 40 min is 94.55 and 98.98, respectively. Six pathogenic microbes were utilized to examine the antimicrobial properties of the synthesized Schiff base complexes and their nanoparticles: Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Streptococcus species, Aspergillus species, and Candida species. Zn(II) and Co(II) complexes display inhibition towards all the studied microbes. Besides, ZnO and Co₃O₄ nanoparticles exhibit less inhibition towards Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Streptococcus species. Moreover, ZnO and Co₃O₄ nanoparticles have no activity towards Aspergillus and Candida species.

Indigo carmine dye falls into the category of toxic chemicals, potentially leading to irritation and allergic reactions in certain individuals. Thus, this study employed the Pechini sol–gel strategy to easily produce CoFe₂O₄ nanoparticles, which serve as an effective adsorbent for the disposal of indigo carmine dye from aqueous solutions. The maximum adsorption capacity of CoFe₂O₄ for indigo carmine dye was determined to be 421.94 mg/g. The synthesized CoFe₂O₄ nanoparticles exhibited an average crystallite size of 18.75 nm. SEM analysis revealed that these nanoparticles were nearly spherical, with an average grain size of 198.32 nm. Additionally, TEM analysis indicated a fully agglomerated spherical morphology for the CoFe₂O₄ sample, with an average diameter of 15.37 nm. The EDS spectrum confirmed that the synthesized CoFe₂O₄ nanoparticles consisted of Co, Fe, and O elements, with respective weight percentages of 17.82%, 49.46%, and 32.72%. The removal of indigo carmine dye by the synthesized CoFe₂O₄ is spontaneous, chemical, exothermic, closely fitting the pseudo-second-order kinetic model, and demonstrating a strong concordance with the Langmuir equilibrium isotherm.