The production process of antimony produces a large amount of solid waste, such as waste rock in mining, tailings in the beneficiation, metallurgical slag in the smelting, and so on. At present, most of these solid wastes are currently in storage, and the storage of a large amount of solid wastes is not only harmful to the local ecological environment but also a waste of resources. In view of this situation, this paper will take antimony tailings and metallurgical slag as examples and summarize them according to their different treatment methods. The comprehensive utilization of antimony tailings is mainly recovering metals by beneficiation and metallurgy and using antimony tailings as building materials and underground filling materials, while the comprehensive utilization method of antimony metallurgical slag is mainly the recovery of valuable metals by pyrometallurgy or hydrometallurgy or the stabilization technology. This paper summarizes the advantages and disadvantages of different treatment methods and puts forward the prospect of future research directions for the treatment of different metallurgical slags and tailings.
Exploring efficient methods to enhance leaching efficiency is critical for bioleaching technology to deal with sulfide concentrate. In our study, a novel artificial microbial community was established to augment the bioleaching efficiency and recovery of copper (Cu) and zinc (Zn). The optimum parameters in bioleaching experiments were explored according to compare a series of conditions from gradient experiments: the pH value was 1.2, temperature was 45 °C, and rotation speed was 160 r/min, which were different with pure microorganism growth conditions. Under optimal conditions, the result of recovery for Cu and Zn indicated that the average leaching rate reached to 80% and 100% respectively, which almost increased 1.8 times and 1.2 times more than control (aseptic condition) group. Therefore, this method of Cu and Zn recovery using a new-type artificial microbial community is expected to be an environmentally-friendly and efficient bioleaching technology solution, which has the potential of large-field engineering application in the future.
Natural silicate minerals have a wide range of applications as green, non-toxic and low-cost materials. In this paper, hydrophilic anti-fog films of silicate minerals were generated via a vacuum evaporation coating method using natural feldspar minerals as raw material. Thermogravimetric analysis shows that the feldspar changes its structure during the coating process, which in turn changes the roughness of the film and improves the hydrophilicity of the film. The hydrophilicity, anti-fogging properties, optical properties and surface morphology of the films were characterized by contact angle measurements, the hydrothermal method, UV-VIS spectrophotometer and atomic force microscopy, respectively. The results show that the mineral films have excellent hydrophilicity. The best anti-fog effect was achieved at a minimum contact angle of 22.3° with water when the thickness of the film was 100 nm. The anti-fog effect gradually decreased with the increasing thickness of the film. The optical transmittance test showed that the film material had a negligible effect on the transmittance of the substrate. When the film thickness was 100 nm, the maximum optical transmittance was 92.2%. This is 4.5% higher than when the film was uncoated, which has a specific visual transmittance effect.