A rapid degradation of wet adhesion is the key factor controlling coating lifetime, for the organic coatings under marine hydrostatic pressure. The mathematical models of wet adhesion have been studied by Grey System Theory (GST). Grey models (GM) (1, 1) of epoxy varnish (EV) coating/steel and epoxy glass flake (EGF) coating/steel have been established, and a lifetime prediction formula has been proposed on the basis of these models. The precision assessments indicate that the established models are accurate, and the prediction formula is capable of making precise lifetime forecasting of the coatings.
Epoxy resin was directly grafted onto the surface of mica powder by high-temperature mechanical ball milling. This method was used to achieve a chemical reaction between the epoxy resin and mica that cannot be carried out under conventional circumstances. The results show that an epoxy resin layer with a thickness of approximately 10 nm formed on the surface of the mica. This modified mica filler exhibited a significant change in its hydrophilic properties. The dispersion of mica and its compatibility with organic coatings also significantly improved. In addition, the modified mica filler was added to the epoxy coating. The improvement of the coating’s compactness and toughness is the reason for its anti-corrosion performance enhancement.
Epoxy coatings incorporating different content of sulfosalicylic acid doped polyaniline (PANI-SSA) have been investigated for corrosion protection of 5083 aluminum alloy in 3.5% NaCl solution. The performance of the coatings is studied using a combination of electrochemical impedance spectroscopy (EIS), open circuit potential (OCP), gravimetric tests, adhesion tests, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results demonstrate that the content of PANI-SSA not only affects the coating compactness and the transportation of aggressive medium, but also has a significant influence on the-based aluminum. The coating with 2 wt. % PANI-SSA exhibits the best corrosion inhibition due to its good protective properties and the formation of a complete PANI-SSA induced oxide layer.
The corrosion behaviors of three bridge steels in a real tropical marine environment for 2 years were studied. One weathering steel (WS) was designed with higher levels of nickel, copper, and molybdenum compared to the other. These two kinds of WSs and one kind of ordinary high-strength low-alloy steel (Q345qe) were compared under two conditions (marine atmospheric zone and marine immersion zone at Sanya Marine Environmental Test Station). The morphology, corrosion rate, and corrosion product analysis of the steels were performed through SEM, XPS, FTIR and other characterization methods. The results demonstrated that weathering steels facilitate the densification of the corrosion product layer due to the addition of alloying elements Cr, Ni, and Cu, promoting rust nucleation and enhancing the compactness of the protective layer. However, in an immersion environment, the extensive erosion by chloride ions renders the benefits of WS ineffective.
The rapid failure of organic coatings in deep-sea environments complicates accurate lifetime prediction. Given the rapid cracking characteristic on the coating surface in this environment, a comprehensive “performance-structure” failure model was established. Initially, a targeted image recognition approach containing convolutional neural network (CNN) and post-processing was constructed for the crack area detection. An overall precision of 82.81% demonstrated the network’s good accuracy. The length distribution and the statistical evolution of cracks were extracted from SEM images to obtain the kinetic equation of the cracks related to coating structure degradation. In addition, the kinetics of water diffusion and coating adhesion were examined, as they represent critical parameters of coating performance. Based on this achievement, a failure model incorporating three dominant factors was integrated by the gray relational analysis method. The average prediction error of the model was 2.60%, which lays the groundwork for developing image-based methods to predict coating life.