We present, to the best of our knowledge, design and performance data of the first diode-pumped Alexandrite ring laser in Q-switched single-longitudinal mode (SLM) operation. The laser resonator contains two Alexandrite crystals, which are pumped longitudinally by means of two laser diode-bar modules emitting at 636 nm. Single-longitudinal mode operation is achieved by seeding the laser with a diode laser operating in SLM and actively stabilizing the cavity, yielding a linewidth of < 10 MHz at the potassium resonance line at 770 nm. The pulse energy is 1 mJ at a repetition rate of 150 Hz and 0.65 mJ at 320 Hz. The beam quality of M2 < 1.2 in both directions remains unchanged for the different repetition rates. After characterization in the laboratory, the laser was implemented in a novel mobile lidar system and first atmospheric measurements were conducted successfully.
We present a differential absorption lidar (DIAL) laser transmitter concept designed around a Nested Cavity Optical Parametric Oscillator (NesCOPO) based Master Oscillator Power Amplifier (MOPA). The spectral bands are located around 2051 nm for CO2 probing and 1982 nm for H216O and HD16O water vapor isotopes. This laser is aimed at being integrated into an airborne lidar, intended to demonstrate future spaceborne instrument characteristics: high-energy (several tens of mJ nanosecond pulses) and high optical frequency stability (less than a few hundreds of kHz long term drift). For integration and efficiency purposes, the proposed design is oriented toward the use of state-of-the-art high aperture periodically poled nonlinear materials. This approach is supported by numerical calculations and preliminary experimental validations, showing that it is possible to achieve energies in the 40–50 mJ range, reaching the requirement levels for spaceborne Integrated Path Differential Absorption (IPDA) measurements. We also propose a frequency referencing technique based on beat note measurement of the laser signal with a self-stabilized optical frequency comb, which is expected to enable frequency measurement precisions better than a few 100 kHz over tens of seconds integration time, and will then be used to feed the cavity locking of the NesCOPO.
In this work, the design of a diode-pumped Alexandrite ring laser in Q-switched single-longitudinal-mode (SLM) operation for a spaceborne lidar mission is presented. The laser is pumped by a self-developed fiber-coupled laser diode pump device and yields a pulse energy of 1.7 mJ at a repetition rate of 500 Hz with an excellent beam quality of M2 < 1.1. By seeding the resonator with a narrow band diode laser, SLM operation with a linewidth of approximately 10 MHz is achieved. The electro-optical efficiency of 2% is the highest achieved for all Alexandrite lasers in SLM operation and reasonable for space operation. The performance analysis as well as benchmarking with the space-qualified mounting technology points out the TRL and the remaining effort for the development of the technology. An estimation of the requirements for a spaceborne resonance lidar mission underlines the suitability of such a lidar system with a diode-pumped Alexandrite laser as the beam source.
We present significantly improved performance data of a diode-pumped -switched Alexandrite laser in single longitudinal mode operation developed as a beam source for resonance lidar systems. The average output power of the laser—operating at the potassium resonance at 770 nm with a linewidth below 10 MHz—could be increased by a factor of five to the Watt-level by means of an optimized resonator design and pump scheme. The pulse energy is 1.7 mJ with a beam quality of in both spatial directions at a repetition rate of 500 Hz.
An Nd:YAG-MOPA system consisting of a stable oscillator and two subsequent Innoslab-based amplifier stages has been designed and built as a technology demonstrator for future lidar applications. Overall, the authors demonstrate that it generates more than 500 mJ of pulse energy at a 1064 nm wavelength and 100 Hz pulse repetition frequency at about 30 ns pulse duration in the single longitudinal mode. Seeded with 75 mJ pulses, the second amplifier stage achieved an optical efficiency (extracted energy to pump energy) of more than 23% while preserving excellent beam quality. To address the 500 mJ regime while retaining the basic system properties, an established Innoslab design was scaled geometrically.
We present design and performance data of two diode-pumped Alexandrite lasers developed explicitly as laser emitters in mobile potassium resonance lidar systems. The lasers yield an output power of up to 1.75 mJ at a repetition rate of 500 Hz with a beam quality of in both spatial directions. Reliable single longitudinal mode operation with a unrivaled narrow linewidth of 3.3 MHz at a potassium resonance line at 769.898 nm is achieved. The wavelength can be switched from pulse to pulse in a range of several gigahertz so the potassium line can be scanned. The lasers are finally integrated in highly efficient lidar systems with a power consumption of 500 W for the whole lidar system. The extremely high spectral requirements are investigated and the performance for different working points regarding repetition rates and pump durations is investigated. Several weeks of remotely controlled operation of the prototype in a field campaign were conducted without changes of the output parameters. Approximately 1000 h of reliable single longitudinal mode operation was achieved during the campaign and measurements of Doppler–Mie wind observations in the stratosphere and of the potassium layer in the mesopause were conducted simultaneously even at daytime.