In a flexible perovskite solar cell, the bottom interface between perovskite and the electron-transporting layer is critical in determining its efficiency and reliability. High defect concentrations and crystalline film fracturing at the bottom interface substantially reduce the efficiency and operational stability. In this work, a liquid crystal elastomer interlayer is intercalated into a flexible device with the charge transfer channel toughened by the aligned mesogenic assembly. The molecular ordering is instantly locked upon photopolymerization of liquid crystalline diacrylate monomers and dithiol-terminated oligomers. The optimized charge collection and the minimized charge recombination at the interface boost the efficiency up to 23.26% and 22.10% for rigid and flexible devices, respectively. The liquid crystal elastomer-induced suppression of phase segregation endows the unencapsulated device maintaining >80% of the initial efficiency for 1570 h. Moreover, the aligned elastomer interlayer preserves the configuration integrity with remarkable repeatability and mechanical robustness, which enables the flexible device to retain 86% of its original efficiency after 5000 bending cycles. The flexible solar cell chips are further integrated into a wearable haptic device with microneedle-based arrays of sensors to demonstrate a pain sensation system in virtual reality.
In this work, we provide a fabrication method for dual-responsive electrochromic (EC) polymer dispersed liquid crystal (PDLC) devices. The EC PDLC device was developed by combing the PDLC technique and a colored complex formed via a redox reaction without a specific EC molecule in a simple preparation method. The mesogen played dual roles in the device for scattering in the form of microdroplets and participating in the redox reactions. Orthogonal experiments were performed with the acrylate monomer concentration, the ionic salt concentration, and the cell thickness as factors to investigate the electro-optical performance for the achievement of optimized fabrication conditions. The optimized device presented four switchable states modulated by external electric fields. The light transmittance of the device was changed by an alternative current (AC) electric field while the color change was realized by a direct current (DC) electric field. Variations of mesogen and ionic salt species can modulate the color and hue of devices, which solves the disadvantage of a single color for traditional EC devices. This work lays the foundation for realizing patterned multi-colored patterned displays and anti-counterfeiting via screen printing and inkjet printing techniques.
31 May 2024 in Journal of Colloid and Interface Science