Friction stir welding (FSW) finds wide application in a number of industries thanks to its efficiency and sustainability. Salient industrial sectors utilising this process are automobile, aerospace, shipbuilding and railways. This article describes the recent advances in FSW. A brief background has also been provided. Most of the advancements attempted to tackle the problem of non-uniform temperature distribution in weld zone, pinhole left after welding and weld efficiency in FSW. In the last two decades, several variants of FSW have become popular. Some researchers augmented auxiliary energy sources with conventional FSW to obtain higher welding speeds and tool life with reduced cost. FSW offers an edge over other welding processes in terms of its ability to join dissimilar materials, e.g. aluminium and steel. Modelling of FSW process needs more attention. At present the available models make several debateable assumptions. Finally, attempts have been made to foresee the future of FSW and to provide some directions for future developments.
23 July 2007 in Journal of Materials Processing Technology
Autofrettage is a metal forming technique widely incorporated for strengthening the thick-walled cylindrical and spherical pressure vessels. The technique is based on the principle of initially subjecting the cylindrical or spherical vessel to partial plastic deformation and then unloading it; as a result of which compressive residual stresses are set up. On the basis of the type of the forming load, autofrettage can be classified into hydraulic, swage, explosive, thermal, and rotational. Considerable research studies have been carried out on autofrettage with a variety of theoretical models and experimental methods. This paper presents an extensive review of various types of autofrettage processes. A wide range of theoretical models and experimental studies are described. Optimization of an autofrettage process is also discussed. Based on the review, some challenging issues and key areas for future research are identified.
16 March 2005 in The International Journal of Advanced Manufacturing Technology