Color changes were tested and compared for heat-treated Paulownia tomentosa and Pinus koraiensis wood treated with hot oil or hot air for further utilization of these species. Hot oil and hot air treatments were conducted at 180, 200, and 220 °C for 1, 2, and 3 h. Heat-treated wood color changes were determined using the CIE-Lab color system. Weight changes of the wood before and after heat treatment were also determined. The weight of the oil heat-treated wood increased considerably but it decreased in air heat-treated wood. The oil heat-treated samples showed a greater decrease in lightness (L*) than air heat-treated samples. A significant change in L* was observed in Paulownia tomentosa. The red/green chromaticity (a*) of both wood samples increased at 180 and 200 °C and slightly decreased at 220 °C. The yellow/blue chromaticity (b*) in both wood samples increased at 180 °C, but it rapidly decreased with increasing treatment durations at 200 and 220 °C. The overall color change (ΔE*) in both heat treatments increased with increasing temperature, being higher in Paulownia tomentosa than in Pinus koraiensis. In conclusion, oil heat treatment reduced treatment duration and was a more effective method than air heat treatment in improving wood color.

This study aimed to investigate and compare the qualitative and quantitative anatomical characteristics of Acacia mangium and Acacia hybrid in plantation forests in Vietnam. The qualitative and quantitative anatomical characteristics were evaluated according to the International Association of Wood Anatomists list of microscopic features for hardwood identification. In terms of qualitative features, A. mangium had a rough, hard, and fissured bark surface with a golden brown to dark brown color, whereas A. hybrid had a smooth and slightly scaly bark surface with greenish brown to greyish brown color, and yellowish white to pale white spots. Moreover, the heartwood–sapwood color and microscopic features of both species were identical. In terms of quantitative features, A. mangium had higher values in the tangential diameter of vessel lumina, vessel per square millimeter, ray number per millimeter, fiber length, and fiber wall thickness than A. hybrid, whereas A. hybrid had a higher ray height and lumen diameter than A. mangium. Thus, it is suggested that bark morphology and some quantitative anatomical characteristics can be used for identification and evaluation of wood quality between A. mangium and A. hybrid growing in Vietnam.

This study investigated the anatomical and non-anatomical characteristics of six wood species, Acacia mangium, Acacia hybrid, Dillenia pentagyna, Anacardium occidentale, Hevea brasiliensis, and Melaleuca cajuputi, from a plantation in Vietnam. The anatomical characteristics and non-anatomical characteristics were observed following the International Association of Wood Anatomists (IAWA) list. All species showed diffuse porosity and non-septate fibers. Exclusively solitary vessels were only observed in M. cajuputi. Vestured pits were observed in A. mangium, A. hybrid, and M. cajuputi, and tyloses were found in A. occidentale and H. brasiliensis. We observed vasicentric axial parenchyma in A. mangium, A. hybrid, A. occidentale, and H. brasiliensis, whereas diffuse axial parenchyma was observed in D. pentagyna and M. cajuputi. Further, prismatic crystals in the axial parenchyma cells existed in A. mangium, A. hybrid, and H. brasiliensis, and raphides in ray cells were observed in D. pentagyna. Silica bodies in ray cells were found in A. occidentale and M. cajuputi. H. brasiliensis exhibited the greatest vessel diameter and ray height, with D. pentagyna exhibiting the greatest fiber length and wall thickness. All the species showed considerable differences in heartwood fluorescence, water and ethanol extract colors, and froth test reactions.

Based on the sclereids in the bark of oak species, a convolutional neural network (CNN) was employed to validate species classification performance and its influencing factors. Three optimizers including stochastic gradient descent (SGD), adaptive moment estimation (Adam), root mean square propagation (RMSProp), and dataset augmentation were adopted. The accuracy and loss stabilized at approximately 15 to 20 and 70 to 80 epochs for the augmented and non-augmented condition, respectively. In the last five epochs, the RMSProp-augmented condition achieved the highest accuracy of 89.8%, whereas the Adam-augmented condition achieved the lowest accuracy of 73.8%. Regarding the loss, SGD-non-augmented condition was the lowest at 0.498, whereas Adam-augmented condition was the highest at 2.740. The highest accuracy was influenced by RMSProp at 0.194. Dataset augmentation had a significant influence on accuracy at 0.456. Homogeneous subsets among the validation conditions indicated that the accuracy and loss were classified into the same subset using an augmented dataset during the training, regardless of the optimizer. Only Adam and RMSProp with non-augmented datasets were categorized into the same subset during the test. Hence, species classification using CNN and sclereid characteristics in the bark was feasible, and RMSProp with augmented datasets showed optimal performance for species classification.

The quantitative anatomical characteristics of Quercus variabilis virgin cork grown in Korea were observed by scanning electron microscopy and compared with Quercus suber reproduction cork from Portugal to obtain basic data for further utilization of domestic cork resources in Korean cork industries. Q. variabilis virgin cork showed a smaller growth ring width and higher latecork percentage than Q. suber reproduction cork. Q. variabilis showed a smaller proportion of cork cells and a higher proportion of lenticular channels than Q. suber, whereas sclereid and dark-brown zones were found only in Q. variabilis. The frequency of pentagonal cork cells in the transverse and radial sections was higher in the cork of Q. suber than in Q. variabilis. In the tangential section, Q. variabilis displayed a lower frequency of heptagonal cells and a higher frequency of pentagonal cells than Q. suber.Q. variabilis cork had a smaller cell width, lumen diameter, cell wall thickness, prism base edge and area, total cell volume, and solid volume of the cell wall than Q. suber cork. The fractional solid volume and number of cells per cm³ were higher in Q. variabilis than Q. suber.

The macroscopic and microscopic anatomical characteristics of wood impact its utilization. This study investigated and compared the anatomical characteristics of six Korean oak wood species: Quercus variabilis, Quercus serrata, Quercus mongolica, Quercus dentata, Quercus aliena, and Quercus acutissima. Microscopic anatomical characteristics were evaluated according to the International Association of Wood Anatomists’ list for hardwood identification. Q. variabilis had a corky bark texture, with a color similar to that of Q. serrata. Flat ridges and shallow-fissured barks were observed in Q. serrata and Q. mongolica. The heartwood color was darker than that of sapwood in all species, with color variations. Q. variabilis had heartwood–sapwood colors similar to those of Q. acutissima, while Q. mongolica and Q. aliena presented similar heartwood–sapwood colors. Concerning microscopic features, Q. variabilis and Q. acutissima exhibited similar latewood vessel arrangements, featuring diagonal and/or radial patterns. In contrast, dendritic-to-diagonal patterns of vessels with angular outlines were observed in Q. serrata, Q. mongolica, Q. dentata, and Q. aliena. Additionally, Q. variabilis and Q. acutissima had vasicentric, confluent, and unilateral paratracheal axial parenchyma in the latewood. In summary, bark morphology, bark color, wood color, and latewood vessel characteristics can be used as identification keys for Korean oak species.