Forest fires threaten the population’s health, biomass, and biodiversity, intensifying the desertification processes and causing temporary damage to conservation areas. Remote sensing has been used to detect, map, and monitor areas that are affected by forest fires due to the fact that the different areas burned by a fire have similar spectral characteristics. This study analyzes the performance of the k-Nearest Neighbor (kNN) and Random Forest (RF) classifiers for the classification of an area that is affected by fires in central Portugal. For that, image data from Landsat-8, Sentinel-2, and Terra satellites and the peculiarities of each of these platforms with the support of Jeffries–Matusita (JM) separability statistics were analyzed. The event under study was a 93.40 km² fire that occurred on 20 July 2019 and was located in the districts of Santarém and Castelo Branco. The results showed that the problems of spectral mixing, registration date, and those associated with the spatial resolution of the sensors were the main factors that led to commission errors with variation between 1% and 15.7% and omission errors between 8.8% and 20%. The classifiers, which performed well, were assessed using the receiver operating characteristic (ROC) curve method, generating maps that were compared based on the areas under the curves (AUC). All of the AUC were greater than 0.88 and the Overall Accuracy (OA) ranged from 89 to 93%. The classification methods that were based on the kNN and RF algorithms showed satisfactory results.

A cost-effective optical sensor for continuous in-situ monitoring of turbidity and suspended particulate matter concentration (SPM), with a production cost in raw materials less than 20 €, is presented for marine or fluvial applications. The sensor uses an infrared LED and three photodetectors with three different positions related to the light source—135º, 90º and 0º—resulting in three different types of light detection: backscattering, nephelometry and transmitted light, respectively. This design allows monitoring in any type of environment, offering a wide dynamic range and accuracy for low and high turbidity or SPM values. An ultraviolet emitter–receiver pair is also used to differentiate organic and inorganic matter through the differences in absorption at different wavelengths. The optical transducers are built in a watertight structure with a radial configuration where a printed circuit board with the electronic signal coupling is assembled. An in-lab calibration of the sensor was made to establish a relation between suspended particulate matter (SPM) or the turbidity (NTU) to the photodetectors’ electrical output value in Volts. Two different sizes of seashore sand were used (180 µm and 350 µm) to evaluate the particle size susceptibility. The sensor was tested in a fluvial environment to evaluate SPM change during sediment transport caused by rain, and a real test of 22 days continuous in-situ monitoring was realized to evaluate its performance in a tidal area. The monitoring results were analysed, showing the SPM change during tidal cycles as well as the influence of the external light and biofouling problems.

Fire is one of the natural agents with the greatest impact on the terrestrial ecosystem and plays an important ecological role in a large part of the terrestrial surface. Remote sensing is an important technique applied in mapping and monitoring changes in forest landscapes affected by fires. This study presents a spectral separability analysis for the detection of burned areas using Landsat-8 OLI/TIRS images in the context of fires that occurred in different biomes of Brazil (dry ecosystem) and Portugal (temperate forest). The research is based on a fusion of spectral indices and automatic classification algorithms scientifically proven to be effective with as little human interaction as possible. The separability index (M) and the Reed–Xiaoli automatic anomaly detection classifier (RXD) allowed the evaluation of the spectral separability and the thematic accuracy of the burned areas for the different spectral indices tested (Burn Area Index (BAI), Normalized Burn Ratio (NBR), Mid-Infrared Burn Index (MIRBI), Normalized Burn Ratio 2 (NBR2), Normalized Burned Index (NBI), and Normalized Burn Ratio Thermal (NBRT)). The analysis parameters were based on spatial dispersion with validation data, commission error (CE), omission error (OE), and the Sørensen–Dice coefficient (DC). The results indicated that the indices based exclusively on the SWIR1 and SWIR2 bands showed a high degree of separability and were more suitable for detecting burned areas, although it was observed that the characteristics of the soil affected the performance of the indices. The classification method based on bitemporal anomalous changes using the RXD anomaly proved to be effective in increasing the burned area in terms of temporal alteration and performing unsupervised detection without relying on the ground truth. On the other hand, the main limitations of RXD were observed in non-abrupt changes, which is very common in fires with low spectral signal, especially in the context of using Landsat-8 images with a 16-day revisit period. The results obtained in this work were able to provide critical information for fire mapping algorithms and for an accurate post-fire spatial estimation in dry ecosystems and temperate forests. The study presents a new comparative approach to classify burned areas in dry ecosystems and temperate forests with the least possible human interference, thus helping investigations when there is little available data on fires in addition to favoring a reduction in fieldwork and gross errors in the classification of burned areas.