Mahmood Rafaei-Booket

Prof. Mahmood Rafaei-Booket

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2016 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
ZAZ. Atlasbaf
Z. Atlasbaf
MSM. Shahabadi
M. Shahabadi
We propose a broadband single-layer reflectarray antenna constituted of a double-screen metallic grating on a periodically perforated low-cost substrate. The reflection characteristics of this structure are computed with a full-wave computational technique that utilizes the dyadic Green's function evaluated by an equivalent transmission line modeling in the spectral domain. The obtained dyadic Green's function is then used in an integral equation for the induced surface current densities on the metallic gratings. The resulting integral equation is solved by the Galerkin's method of moments with subdomain basis functions. With the help of this semianalytical method, the phase diagram of the reflectarray unit cell is computed. Using the calculated phase diagram, a center-fed reflectarray is designed at a center frequency of 10.5 GHz. To validate the numerical results, the designed reflectarray for the X-band (8.95-12.1 GHz) is fabricated and measured. The measurements on a 270 mm × 270 mm and F/D = 0.95 reflectarray show a maximum gain of 26.57 dBi with a 1-dB gain bandwidth of 29.5% and an efficiency of 41% at 10.5 GHz. It is shown that the fabricated reflectarray exhibits a reduced radar cross-section outside its operating bandwidth.

10 June 2020 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
SMSeyed Mostafa Mousavi
Seyed Mostafa Mousavi
Plane‐wave scattering by metallic grating with artificial anisotropic substrate is a problem solved in this study for the design of broadband reflectarrays. For determination of the reflection characteristics of such structures, a generalised transmission line modelling is used for evaluating the dyadic Green's function. This function is utilised in a summation equation used for calculating the induced electric currents on the reflectarray's metallic grating. For solving the obtained summation equation, the Periodic Method of Moments with Galerkin procedure is applied. Such an analysis method helps to compute the phase diagram needed to design of reflectarray. The efficiency of this method is assessed by considering its cost‐time and rate of convergence versus space harmonics. In the design step, a new phase realisation approach is implemented for minimising the frequency dispersion's adverse effects. This approach optimises the arrangement of metallic elements on the reflectarray's aperture and decreases the dependency of broadband reflectarray design to the element phase behaviour. As a result, this technique leads to lower side lobe level and better frequency response than traditional approaches. To verify the results of the developed solution, two different broadband reflectarrays for X‐ and Ku‐bands are fabricated and measured.

4 November 2022 in IEEE Access
Verified
Journal Article
Open access
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
MBMahdieh Bozorgi
Mahdieh Bozorgi
A computational technique for evaluating the spectral dyadic Green’s function utilized in the analysis of multilayer structures composed of periodic bi-anisotropic layers is presented. The Green’s function is achieved with the help of a fully vectorial rigorous matrix formulation based on a generalized transmission line (TL) formulation of Maxwell’s equations. This matrix formulation simplifies the mathematics involved in the modeling of the coupled diffraction orders within a periodic bi-anisotropic layer. To examine the soundness of this modeling, the extracted Green’s function is used in an integral equation for the analysis of metallic gratings on homogeneous/inhomogeneous anisotropic and chiral materials. The resulting integral equation is then solved by the Method of Moments (MoM) formulated in terms of sub-domain basis and Galerkin’s test functions. As verification, several examples are analyzed and the results obtained by this method are compared with those available in the literature or obtained by EM-solvers. The efficiency assessment of this method is carried out by considering its convergence rate and cost-time in terms of truncation orders. It is revealed not only the metallic grating with inhomogeneous periodic bi-anisotropic layers can be analyzed by this method but also analysis time, memory, and CPU occupancies are decreased in comparison with commercial EM-solvers.

12 November 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SHSina Hasibi-Taheri
Sina Hasibi-Taheri
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
AGAyaz Ghorbani
Ayaz Ghorbani

29 July 2024 in IEEE Access
Verified
Journal Article
Open access
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
MBMahdieh Bozorgi
Mahdieh Bozorgi
A self-casing Microstrip Reflectarray Antenna (MRA) is proposed with high-gain, broadband, mechanically simple properties. It needs no radome due to exploiting a low-cost porous superstrate. Such an inhomogeneous layer is made up of the robust FR4 dielectric in which air rods are periodically drilled. This porous layer is suspended above the metallic plane using spacer and the re-radiating elements are printed on its interior side for designing a broadband center-fed MRA. Its element is a new Butterfly-Like Patch (BLP) with two degrees of freedom (length and angle). By analyzing its sub-wavelength unit cell, the calculated total phase range is more than 700°, which can be a good choice for broadband MRA design. Using this phase response and an efficient phase synthesis technique, an optimized metallization arrangement is analytically obtained to design a good frequency behavior MRA. To validate the numerical results, a $270\times 270\times 3.9$ mm3 MRA with focal length 26.1 cm is manufactured and tested. Measured results show a peak gain 29.1dB with a 1-dB gain bandwidth of 42.6% ( $9.7\sim 14.9$ GHz) and maximum efficiency 58% at central frequency 12GHz. It is experimentally shown that the gain and bandwidth of this self-covering MRA is better than conventional one.

10 June 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
MRMahmood Rafaei-Booket
Mahmood Rafaei-Booket
MBMahdieh Bozorgi
Mahdieh Bozorgi
We present an efficient technique to use the periodic method of moments (PMOM) in analyzing the plasmonic nano-antenna gratings (PNAGs) on natural/artificial anisotropic thin films. The artificial media are made up of two alternating isotropic regions in which the optic axis is chosen to be parallel to the period of grating due to its more complicated analysis. Dyadic Green's function (DGF) of these structures is obtained by utilizing the equivalent model of transmission line in Fourier domain and considering the plasmonic effects. Such a DGF is used in a series equation formulated for computing the effective electric currents induced on PNAG's surface. Solving such a series equation is carried out using Galerkin's version of PMOM with appropriate sub-domain functions. Using this technique, the scattering characteristics of different examples of double-screen PNAGs with homogeneous natural/inhomogeneous artificial anisotropic thin films are calculated. Assessment of this technique's efficiency is carried out by taking its cost–time and convergence rate vs truncation orders into account. It is shown that by using the developed technique, not only PNAGs with natural/artificial dielectrics can be analyzed within short time but also CPU and memory occupancies are reduced in comparison with commercial Electromagnetic (EM)-solvers.