Printed electronics is one of the emerging technologies owing to its low cost and productivity. Recently, many researchers tried to adapt printing technology to the fabrication of fine electronic patterns on flexible substrates, including the gate line of thin film transistors. In this study, we fabricated a flexible cliché using the nanoimprint process and used it in reverse offset printing. Then, we analyzed the effect of the surface energy of the imprinted cliché on process parameters, such as printing speed and rolling direction. We showed that the productivity of the process and quality of printed pattern can be considerably enhanced by controlling the surface energy of the cliché. When a flexible cliché is manufactured using a resin with a surface energy considerably different from that of the blanket, the ink can be detached easily and fine patterns can be engraved successfully regardless of the pattern shape.

Nanowire structures have attracted attention in various fields, since new characteristics could be acquired in minute regions. Especially, Anodic Aluminum Oxide (AAO) is widely used in the fabrication of nanostructures, which has many nanosized pores and well-organized nano pattern. Using AAO as a template for replication, nanowires with a very high aspect ratio can be fabricated. Herein, we propose a facile method to fabricate a nano-micro hybrid structure using nanowires replicated from AAO, and surface treatment. A polymer resin was coated between Polyethylene terephthalate (PET) and the AAO filter, roller pressed, and UV-cured. After the removal of aluminum by using NaOH solution, the nanowires aggregated to form a micropattern. The resulting structure was subjected to various surface treatments to investigate the surface behavior and wettability. As opposed to reported data, UV-ozone treatment can enhance surface hydrophobicity because the UV energy affects the nanowire surface, thus altering the shape of the aggregated nanowires. The hydrophobicity of the surface could be further improved by octadecyltrichlorosilane (OTS) coating immediately after UV-ozone treatment. We thus demonstrated that the nano-micro hybrid structure could be formed in the middle of nanowire replication, and then, the shape and surface characteristics could be controlled by surface treatment.