The prosperity of microelectronics has intensified the requirement for miniaturized power systems using capacitors with high capacity and broad frequency ranges. Electrochemical supercapacitors stand out with their superior capacitance density, surpassing traditional electrolytic capacitors by at least two orders of magnitude. However, the intrinsic slow ion dynamics of electrical double layer effects greatly limit supercapacitors characteristic frequency, constraining their applicability in microsystems. This work constructs a near-ideal micro electrochemical supercapacitor, featuring the monolayer graphene as a working electrode, to reveal the ceiling of electrochemical capacitance characteristic frequency. To address this limitation, we introduce a Hybrid Electrochemical Electrolytic Capacitor design, which asymmetrically coupling the electrochemical and dielectric effects. At low frequencies, the electrochemical segment provides sufficient capacity, while its electrolytic segment takes over at high frequencies, broadening the frequency range. Consequently, the hybrid design boasts considerable capacitance density across a broad frequency range. Employing our wafer-scale microfabrication techniques, we showcase a device, achieving a characteristic frequency of 44 kHz and a volume capacitance density of 800 \({{\rm{\mu }}}{{\rm{F}}}/{{{\rm{cm}}}}^{3}\). To demonstrate its practicality in microsystems, the device is integrated with a power management chip and buck circuit module, respectively, with only 2 % space usage compared to commercial electrolytic capacitor, achieving the same performance.
A triboelectric nanogenerator (TENG), which harvests ubiquitous ambient mechanical energy, is a promising power source for distributed energy. Recently reported new generation direct current TENG (DC-TENG) based on the air breakdown effect exhibits unique advantages over conventional modes of TENG devices, such as free-of-rectification and intrinsic switching behavior. However, owing to different working mechanisms and output characteristics, existing theory and power management strategies are not suitable for in-depth understanding and further advancement of air breakdown DC-TENG. Herein, a theoretical study and experimental verification that systematically investigate the physics, output characteristics, and power management strategy of air breakdown DC-TENG is presented. A general simulation model is then proposed and verified through a statistical analysis method. Contrary to previous understanding of a highly conductive breakdown pathway, a huge resistance is observed and causes inevitable energy loss, which is regarded to be caused by corona discharge. Finally, device optimization and power management strategies are discussed, and fundamental guidance is given for the rational design of air breakdown DC-TENG.
5 June 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Triboelectric nanogenerators (TENGs), as emerging mechanical energy harvesters, have attracted extensive research interests. Achieving maximum energy output of TENG requires to release its intrinsic charge with the ultrahigh open-circuit voltage (~several hundred volts), thus the efficient power management of TENG is more than difficult. In this paper, we present the first high-voltage triboelectric energy management implementation based on synchronous electric charge extraction (SECE) strategy. We combine a synchronizing signal generation IC with a few off-chip components, ensuring the input voltage of the system can reach 300 V, greatly higher than previous work. The proposed IC is fabricated in 180-nm technology with an active area of 0.076 mm2. Specifically, a sensitive peak detector with noise suppression module ensures the effective energy harvesting from 1 Hz to 5 Hz mechanical motions. Meanwhile, a designed nA current source help to reduce the circuit power consumption to as low as $1.56~\mu $ W @ 5 Hz. Moreover, the system can operate with cold start-up without any external power supply. The measurement results show that the proposed circuit achieves a peak systematic efficiency $\boldsymbol {\eta }_{sys}$ of 51.2% (7.56 V @ $C_{store} = 22~\mu $ F).
Micro supercapacitors (MSCs) with ultrahigh capacitance density and thin-film fabrication capability are promising energy storage and power-filtering devices for integrated systems. However, the wafer-scale fabrication and encapsulation of MSCs are challenging, mainly resulting from incompatibility between chemically active electrolytes and standard microfabrication techniques. Here, we report a complete wafer-scale preparation of well-encapsulated MSCs based on newly developed electrolyte deposition and device package methods. The proposed encapsulation process only compromises spin-coating and photolithography processes; hence, it is cost-effective, gives high throughput, and is intrinsically scalable. The experimental results demonstrate that the encapsulation approach promises a longer device lifetime and minor impacts on capacitive performances. The prototype MSC has a capacitance density exceeding 2 mF/cm 2 at a high scan rate of 10 V/s and a time constant of ~8 ms, meeting the AC-line-filtering requirements. Moreover, the process uniformity, operation leakage current, and temperature endurance range are also investigated and discussed. This work will significantly promote the practical application of MSCs.
17 October 2023 in IEEE Transactions on Power Electronics
Effective power management is critical in promoting the widespread utilization of triboelectric nanogenerators (TENGs), which currently suffer from low power efficiency for practical low-voltage loads and incompatibility with integrated circuits (ICs). In this study, we propose a multirelease synchronized charge extraction (MR-SCE) strategy based on the concept of “limit,” featuring unprecedented high efficiency and IC compatibility. The key to the MR-SCE strategy is to exploit the high-speed operation characteristics of electronic circuits to construct optimized discharge platforms for each small part of the TENG charge. We present a rigorous theoretical framework and simulation results, which demonstrate that nearly 100% of the TENG's maximum energy can be transferred to low-voltage energy storage units in ideal conditions, a remarkable two orders of magnitude higher than existing strategies. The verification circuit with novel structure is fully IC-compatible as it consists only of resistors, capacitors, diodes, and transistors. Despite nonideal factors, we achieve an energy efficiency of 22.3%, significantly higher than previous reports. In addition, the pathway and key technologies to achieve high-performance power management IC of the TENG are also discussed. It is believed that this work sets a new standard for the TENG power management and significantly accelerates their commercialization process.
Hybrid energy harvesters offer promising solutions for powering distributed sensors. However, achieving optimal synergy among multiple energy sources to attain superior performance remains challenging. Herein, we proposed an ultrahigh performance electric-field and vibration hybrid energy harvester, leveraging the induced charge excitation strategy (ICE-EVH). Induced charges generated by the electric-field energy harvester are pumped into a contact-separation triboelectric nanogenerator (TENG) to provide charge excitation. Subsequently, the mechanical motion of TENG-electrodes boosts the electric potential of induced charges and the output energy. This hybrid paradigm enables effective synergy for harvesting electric-field and vibration energy with highly-efficient hybrid power management and ultrahigh energy density. The peak and average power densities reach 5.15 MW m−2 and 1.02 W m−2, respectively, significantly surpassing the combined output of individual harvesters and demonstrating a “1 + 1 > 2” hybrid performance. Finally, an all-in-one ICE-EVH prototype was developed, which successfully powered a wireless camera. This work provides new insights for designing high-performance hybrid nanogenerators with broad application potential.